Reliability assessment of granular filters in embankment dams

Empirical criteria have been used successfully to design filters of most embankment large dam projects throughout the world. However, these empirical rules are only applicable to a particular range of soils tested in laboratory and do not take into account the variability of the base material and filter particle sizes. In addition, it is widely accepted that the safety of fill dams is mainly dependent on the reliability of their filter performance. The work herein presented consists in a new general method for assessing the probability of fulfilling any empirical filter design criteria accounting for base and filter heterogeneity by means of first‐order reliability methods (FORM), so that reliability indexes and probabilities of fulfilling any particular criteria are obtained. This method will allow engineers to estimate the safety of existing filters in terms of probability of fulfilling their design criteria and might also be used as a decision tool on sampling needs and material size tolerances during construction. In addition, sensitivity analysis makes possible to analyse how reliabilities are influenced by different sources of input data. Finally, in case of a portfolio risk assessment, this method will allow engineers to compare the safety of several existing dams in order to prioritize safety investments and it is expected to be a very useful tool to evaluate probabilities of failure due to internal erosion. Copyright © 2006 John Wiley & Sons, Ltd.     

Geothermal palaeogradients and metamorphic zonation from the conodont colour alteration index (CAI)

The conodont colour alteration index (CAI) is potentially valuable in thermal history investigations, but there are problems in its use. An approach is proposed herein to overcome the problem of establishing reliable geothermal palaeogradients in areas with burial metamorphism, based on knowledge of the stratigraphic succession thickness, the boundaries of chronostratigraphic units, and the age and duration of deformation episodes. Although also problematical that a correlation between CAI and Kübler index (KI) values does not exist, there are areas where CAI and KI values are notably consistent for the anchizone boundaries; however, anomalous correlations between CAI and KI values have also been found in some areas. A CAI anchizone (or ancaizone) is defined in order to enable CAI values to be used independently to establish a metamorphic zonation.     

Shale basins,sulfur-deficient ore brines and the formation of exhalative base metal deposits

The massive sulfide deposits of the Iberian Pyrite Belt are interbedded with felsic volcanic rocks and shale, and underlain by several thousand meters of siliciclastic sedimentary rocks known as the PQ Group. Isotope geochemistry and regional geology are both consistent with equilibration of the ore-forming fluids with the PQ Group, prior to ore deposition near the former seafloor. The average Cu:Zn:Pb ratio of the PQ Group rocks (ca. 26:55:19) is similar to the weighted average of all the massive sulfide orebodies combined (ca. 25:52:23).The genetic relationship between massive sulfide deposits and a siliciclastic sedimentary metal source is explained here by a thermodynamic model, proposing that mildly reducing redox conditions imposed by equilibration with the sedimentary rocks are most critical for the formation of an effective ore-forming fluid. Relatively metal-rich but organic-poor pyrite-bearing shale undergoing dewatering of saline pore fluids is an effective source for the generation of sulfur-deficient but relatively iron and base metal-rich brines. Thus, we propose that the giant deposits of the Iberian Pyrite Belt owe their existence not to exceptionally metal-enriched (e.g., magmatic) fluids, but to the existence of a fairly ordinary but large metal source in reactive siliciclastic sediments, combined with an underlying igneous heat source and a particularly efficient mechanism of sulfide precipitation by mixing with H₂S-rich fluids at or near the seafloor.Essentially similar mineral equilibria are imposed when saline fluids are buffered by typical continental basement rocks. Leaching of retrograde minerals and possibly residual salts from their magmatic or metamorphic prehistory is expected to generate similar, variably metal-rich but relatively sulfide-deficient fluids. Thus, the existence of mildly reducing rocks can be the dominant chemical control in the source of fluids generating many volcanogenic, Irish-type or sedex deposits, many of which are known to precipitate their metal load in response to biogenic sulfide addition at the ore deposition site.     

Determination of nutrient salts by automatic methods both in seawater and brackish water: the phosphate blank

The main inconvenience in determining nutrients in seawater by automatic methods is simply solved: the preparation of a suitable blank which corrects the effect of the refractive index change on the recorded signal. Two procedures are proposed, one physical (a simple equation to estimate the effect) and the other chemical (removal of the dissolved phosphorus with ferric hydroxide).     

Byproduct Formation During the Reduction of TCE by Zero-Valence Iron and Palladized Iron

Trichloroethene (TCE) was reduced with zero-valence iron and palladized iron in zero-head-space extractors. Progress of the reaction in these batch studies was monitored with purge-and-trap gas chromatography and a flame ionization detector. When a 5 ppm initial concentration of TCF. reacts with zero-valence iron, approximately 140 ppb of vinyl chloride persists for as long as 73 days. The concentration of vinyl chloride (approximately If) ppb) remaining with palladized iron is approximately an order of magnitude less than when zero-valence iron is the reductant. These data suggest that volatile byproducts may be under-represented in oilier published data regarding reduction with zero-valence metals. These results also demonstrate that the reduction of TCE with palladized iron (0.05 percent palladium) is more than an order of magnitude faster than with zero-valence iron. Wilh a 5:1 solution-to-solid ratio the TCE half-life with zero-valence iron is 7.41 hours. but is only 0.59 hours with the palladized iron.     

Lateral variations in tectonic style across cross-strike discontinuities: an example from the Central Apennines belt (Italy)

In foreland thrust belts, abrupt lateral changes in tectonic style, structural–stratigraphic features, and topography usually occur across cross-strike faults. The Central Apennines of Italy offer an exceptional scenario of lateral variations in tectonic setting. Here, the Sangro Volturno oblique thrust ramp (SVOTR) represents the outer thrust front of the Pliocene–Quaternary foreland thrust system, confining southward the axial culmination of the orogen that occurs in the Central Apennines. We present an interpretation of the Pliocene–Quaternary evolution of this cross-strike fault through an integrated dataset including structural-geological mapping and subsurface onshore seismic reflection profiles. The interpretation of the structural framework is augmented by the analysis of low-temperature thermochronometers from 32 new sites extending across the subsurface transverse structure. As evidenced by seismic line interpretation, the localization and development of the SVOTR have been influenced by inherited extensional faults within a positive inversion tectonics context. The regional distribution of the maximum paleotemperature values across the SVOTR constrains the original extent of the allochthonous thrust sheet over all its hanging-wall and footwall blocks. The Pliocene–Quaternary thrusting and inversion of SVOTR caused the strong hanging-wall uplift, which brought to the complete erosion of the allochthonous units and the exhumation of the Adria units. The integrated analysis of low-temperature thermochronometers and structural evidence as applied in the study case can define the role of major cross-strike discontinuities in foreland thrust belts, by constraining and verifying their tectonics inversion significance and the amount of related exhumation.     

A Re–Os study of sulfide minerals from the Bagdad porphyry Cu–Mo deposit, northern Arizona, USA

Rhenium and osmium isotopes in sulfide minerals from the Bagdad porphyry Cu–Mo deposit have been used to determine timing of mineralization and the source of osmium and, by inference, ore metals. Molybdenite, chalcopyrite and pyrite were analyzed mainly from the quartz monzonite and porphyritic quartz monzonite units, which are characterized by moderate to strong potassic alteration (secondary biotite and K-feldspar). Rhenium concentrations in molybdenite are between 330 and 642 ppm. Four Re–Os analyses of two molybdenite samples from the quartz monzonite and porphyritic quartz monzonite yield a weighted average age of 71.8±0.2 Ma (2s). Analyses of a third sample from a molybdenite vein in Precambrian rocks, outside of the main ore zone, yield a weighted average age of 75.9±0.2 Ma (2s), and provide evidence of two separate mineralization episodes. Chalcopyrite samples contain 6 to 12 ppt Os and 1.7 to 4.1 ppb Re; ¹⁸⁷Os/ ¹⁸⁸Os initial ratios are between 0.1 and 0.8. Pyrite samples have osmium and rhenium concentrations varying in the range 8–17 ppt and 3.9–6.8 ppb, respectively. Analyses from these pyrite samples yield an eight-point isochron with an age of 77±15 Ma (2s) and an initial ¹⁸⁷Os/ ¹⁸⁸Os ratio of 2.1±0.8 (MSWD=0.90). The results presented here add to the growing body of work indicating that porphyry-type mineralization is produced by long-term, multiple episodes of magmatism and associated mineralization. The data also support the hypothesis that a significant part of the metals and magmas may have a crustal source, as has been suggested for other copper deposits and districts in Arizona.     

Geological and SHRIMP II U-Pb constraints on the age and origin of the Breves Cu-Au-(W-Bi-Sn) deposit,Carajás,Brazil

The Breves deposit in the Carajás Copper-Gold Belt, Brazil, a member of the Cu-Au-(W-Bi-Sn) group of deposits, contains about 50 Mt of 1.22% Cu, 0.75 g/t Au, 2.4 g/t Ag, 1,200 g/t W, 70 g/t Sn, 175 g/t Mo and 75 g/t Bi. It is hosted by sandstones and siltstones of the Águas Claras Formation (minimum age of 2,681±5 Ma) in the roof zone of a complex, highly altered granite intrusion. The mineralisation is disseminated in a greisenized zone, resulting from alteration of probable monzogranites and syenogranites. The ore-bearing greisen contains abundant xenomorphic quartz in association with Fe-chlorite and muscovite. The gangue assemblage also includes fluorite, tourmaline, and minor amounts of monazite, xenotime, chlorapatite, thorite, zircon, calcite, siderite and bastnäesite. Copper mineralisation is dominated by chalcopyrite associated with pyrite, arsenopyrite, pyrrhotite and molybdenite. Gold particles, in equilibrium with native bismuth, are common as inclusions in chalcopyrite. The greisen contains sub-economic concentrations of tungsten and niobium that are related to the presence of ferberite, qitianlingite and Nb-rutile. SHRIMP II zircon dating of the host granites gives ²⁰⁷Pb/²⁰⁶Pb ages of 1,878±8 and 1,880±9 Ma for two phases, and a combined age of 1,879±6 Ma. SHRIMP II dating of monazite and xenotime grains in late- to post-mineralisation veins gives a combined ²⁰⁷Pb/²⁰⁶Pb age of 1,872±7 Ma, indistinguishable from the ages of the granites. This provides a genetic connection between the Breves deposit and the ca. 1.88 Ga A-type granite magmatism that typifies the Carajás Belt as part of a much larger, intracratonic magmatic province that extends over much of the Amazonian Craton. The recognition of this association has exploration implications, not only for the geophysical signature of the granite roof zones, but also for likely geochemical dispersion around the deposits of this type.Editorial handling: G. Beaudoin     

Pressure-Dependence of Rare Earth Element Distribution in Amphibolite- and Granulite- Grade Garnets. A LA-ICP-MS Study

Using an excimer (KrF) laser ablation ICP-MS system, we studied the distribution of REE in garnets from metapelites and metabasites from Ivrea-Verbano (Western Alps, Italy) and from the Peña Negra Anatectic Complex (Central Iberia), finding systematic variations that correlate well with the metamorphic grade. Chondrite-normalized REE patterns of garnets from amphibolite-grade metapelites have lower-than-chondrite levels from La to Sm, a very small or no Eu anomaly, and a steep rise in the abundance of heavy REE as the atomic number increases. Metapelitic garnets from the amphibolite-granulite transition have a marked Eu negative anomaly and are enriched in MREE such that Sm is 10-15 times chondrite and the pattern is almost flat from Dy to Yb-Lu. In garnets from granulite-grade metapelites, the intensity of the Eu anomaly and the relative concentration of Nd, Sm, Gd and Tb increase, with almost flat chondrite-normalized patterns from Sm to Lu. Garnets from mafic granulites are remarkably similar to those of metapelitic garnets equilibrated at the same pressure, except for the Eu anomaly. The apparent paradox of enhanced uptake of larger REE ions with increasing pressure is attributed to the 3M²⁺ 2REE³⁺+ vacancy substitution, which produces a net decrease in the dimensions of the unit-cell of garnet. Variations in REE patterns depend essentially on the pressure and have little dependence on either temperature, bulk-composition of garnet, or REE whole-rock composition, so they could represent a new approach for geobarometric studies. The best numerical parameter to express pressure-related variations of REE distribution in garnets is the Gd/Dy ratio which does not seem perceptibly affected by disequilibrium partitioning. The regression equation between GASP pressure and the average Gd/Dy^garnet is P = 3.6 + 5.6 Gd/Dy. This equation seems to be reliable for garnets: (1)equilibrated within a pressure range of 4-9 kbar, (2) coexisting with modal monazite; and (3) with unit-cell dimensions under 11.46 Å.