Microstructure and Sliding Wear Behaviour of Ni(Cr)-TiB_2 Coatings Deposited by HVOF Spraying of SHS Powders

THERMAL SPRAYING provides a large range ofcoatings,which increase the wear resistance ofsubstrates[1].One of the major coating families is thecermet,composed of hard ceramic particles with ametallic binder.The most commonly used cermetcoatings in industrial applications are based on eitherthe WC-Co or the Cr3C2-Ni(Cr)systems with WC-17wt%Co and Cr3C2-25wt%Ni(Cr)being typicalcompositions[2,3].Although WC-Co deposits are hardand wear resistant at ambient temperatures their rangeof ap…     

An analytical procedure for dynamic response determination of a viscoelastic beam with moderately large deflection using first-order shear deformation theory

In this article, the dynamic response of a viscoelastic beam with moderately large deflection subjected to transverse and axial loads is studied using the first-order shear deformation theory. The von-Karman strain displacement relations and Hooke's law are used for formulation. The solution of the equations, which are a system of nonlinear partial differential equations, are obtained analytically using the perturbation technique in conjunction with the eigenfunction expansion method. The results are compared with the finite elements method. Also, a sensitivity analysis is performed, and the effects of geometrical and material properties are investigated on the response.     

Low-velocity impact damage response of fiberglass/magnesium fiber-metal laminates under different size and shape impactors

Low-velocity impact tests are performed on fiberglass/AZ31B-H24 magnesium fiber-metal laminates (FMLs) with various configurations in order to gain a better understanding of the effect of an impactor's features on the response of this type of FML. For that, impactors with two different shapes (hemispherical and sharp-edged) and sizes are used to impact the specimens. The impact response data, such as the deformation of the contact location and energy absorption, is obtained directly during the impact tests through the impact equipment, while mechanical sectioning was carried out to establish the extent of delaminated area and post-impact residual deformation. While the sharp-edged impactor caused the development of cracks on the metal constituent, and delamination within the specimens, the hemispherical ones imposed more influence over the residual deformation. Noticeable differences are observed in response of FML specimens made with two and three layers of magnesium, especially with respect to the energy absorption capacity. Moreover, finite-element analysis, as a major part of this study, has been employed to simulate the low-velocity impact response of FML specimens. The behavior of specimens has been simulated using the commercial finite-element code ABAQUS. The results imply that there is a good agreement between the experimental and numerical results.     

Designing a nuclear battery based on the Mo-99 radioactive source soluble in water and aqua regia in order to use in early tests

Today, millions of electrocommunication, electric, medical, and industrial devices use battery. Batteries with long life and high energy density seem to be essential in medical, military, oil and mining, aerospace areas as well as conditions in which access is difficult and in situations where replacement or recharging of battery is costly.In this regard, the use of radiation energy resulting from radioactive materials and its conversion to electric energy can be effective in making batteries. In the present study,various Mo-99 radioisotope values with a half-life of 65.98 h were used as a soluble radioactive source in two materials of water and aqua regia. Then, by comparing the results of the Monte Carlo simulations program MCNPX for these two solutions, it was found that when the water is used instead of aqua regia(for idealization), the values of the superficial current of electrons, the volumetric flux of electrons, and the deposited energy in the volume containing the radioactive solution increased by 10.80, 4.10,and 13.80%, respectively. Also, the short-circuit current and energy conversion efficiency of this battery with a concentration of 0.01 molar, Mo-99 dissolved in the aqua regia are 0.79μA and 16.47%, respectively.     

Determination of Polycyclic Aromatic Hydrocarbons (PAHs) in Olive and Refined Pomace Olive Oils with Modified Low Temperature and Ultrasound-Assisted Liquid–Liquid Extraction Method Followed by the HPLC/FLD

The cleanup method of modified low temperature was compared with the standardized method of modified ultrasound-assisted liquid–liquid (UALL) extraction for the analysis of 15 polycyclic aromatic hydrocarbons (PAHs) in olive oil and refined pomace olive oil. The modified UALL extraction consisted in purification on C₁₈ reversed-phase, Florisil-bonded-phase and NH₂ cartridges, and modified low-temperature extraction was followed by alumina-N and NH₂ solid-phase extraction (SPE) cartridges. Both methods are followed by reversed-phase high-performance liquid chromatography with fluorescence detection. The chromatograms of the final extracts showed lower interferences in both of the methods. The solvent consumption and cost for the modified UALL method were higher than those of the modified low temperature, and also, it needed more equipment, but its analysis time was less. The limit of detection and limit of quantitation of the modified UALL method were 0.16–0.97 and 0.57–2.93 μg kg^?1, respectively, and for the modified low temperature, they were 0.09–1.97 and 0.29–5.99 μg kg^?1, respectively. The PAH recoveries for the modified UALL extraction method ranged from 75.0 to 111.0 % (RSD?=?3–8 %), and for the modified low temperature, they ranged from 81.5 to 113.8 % (RSD?=?3–10 %).     

Preparation of silver nanostructure from silver(I) coordination polymer and fabrication of nano silver(I) bromide by reverse micelles technique

A new one-dimensional silver(I) coordination polymer, [Ag(μ-bpfb)(NO₃)]_n (1); bpfb = N,N′-bis(4-pyridylformamide)-1,4-benzene, has been synthesized and characterized by IR, ¹H NMR and ¹³C NMR spectroscopy. The single crystal X-ray data show that the silver(I) 1D coordination polymer grows into a three-dimensional network by hydrogen bonding and π–π stacking interactions. Compound 1 with nanorod morphology was also prepared by sonochemical method. The cetyltrimethylammonium bromide (CTAB) as a cationic surfactant was used in reverse micelles technique to obtain spongy silver(I) bromide nanoparticles from compound 1. Also, different silver nanoparticles have been prepared via direct calcination at 673 K and thermal decomposition in oleic acid from compound 1. The nanostructures of [Ag(μ-bpfb)(NO₃)]_n (1), silver and silver(I) bromide were characterized by X-ray powder diffraction (XRD), scanning electron microscopy (SEM) and energy-dispersive X-ray (EDAX) analysis. Thermal stability of compound 1 in both bulk and nano-sized form was studied by thermal gravimetric (TG) and differential thermal (DT) analyses.     

Carbon/PbO2 asymmetric electrochemical capacitor based on methanesulfonic acid electrolyte

A new hybrid electrochemical capacitor based on an activated carbon negative electrode, lead dioxide thin film and nanowire array positive electrode with an electrolyte made of a lead salt dissolved in methanesulfonic acid was investigated. It is shown that the maximum energy density and specific capacity of the C/PbO₂ nanowire system increase during the first 50 cycles before reaching their maximum values, which are 29 Wh kg⁻¹ and 34 F g⁻¹, respectively, at a current density of 10 mA cm⁻² and a depth of discharge (positive active electrode material) of 3.8%, that corresponds to a 22C rate. This is 7–8 times higher than the corresponding maximum values reached with a C/PbO₂ thin film cell operated in the same conditions. After an initial activation period, the performances of the C/PbO₂ nanowire system stay constant and do not show any sign of degradation during more than 5000 cycles. For comparison, the C/PbO₂ thin film system exhibits a 50% decrease of its performances in similar conditions.     

Synthesis of colloidal nanosilica from waste glass powder as a low cost precursor

Waste glass powder was used as a low cost precursor for production of colloidal nanosilica for the first time. The process includes production of wet silica gel and thermal peptization of the wet gel. Purification of the glass powder and wet gel production were initiated by acid washing. The obtained powder was reacted with sodium hydroxide to produce wet silica gel. Type of the applied acid was examined in one factor at a time route. Temperature of the alkaline step and concentrations of the applied acid and base were investigated using Taguchi design of experiments. After finding the best combination of the investigated factor levels in production of the wet gel, time of the stabilization in thermal peptization was studied. Characterizations of the wet gel and colloidal silica were performed by XRF, DLS, FESEM, TEM, FTIR and N₂ sorption evaluation. Accordingly pure and stable colloidal nanosilica (98.50%) with average particle size of 21.9?nm was produced from the glass powder successfully. Specific surface area of the dried porous optimum sample was 83.63?m²/g.     

Dithiocarbamate as an efficient intermediate for the synthesis of 2-(alkylthio)thiazol-4(5H)-ones

An effective approach for the synthesis of 2-(alkylthio)thiazol-4(5H)-ones from alkyl dithiocarbamates and chloroacetyl chloride in the presence of NaHCO₃ has been developed. Good to excellent yields of products, simple reaction conditions and general applicability are the most important advantages of this protocol.