A wafer level monitoring method for plasma-charging damage usingantenna PMOSFET test structure

A novel monitoring method for plasma-charging damage is proposed. This method performs a quick and accurate evaluation using antenna PMOSFET. It was found that not only hot-carrier (HC) lifetime but transistor parameters such as initial gate current and substrate current were changed according to the degree of plasma-charging damage. However, the present work suggests that monitoring the shift of drain current after a few seconds of HC stress is a more accurate method to indicate plasma-charging damage. The monitoring method using the present test structure is demonstrated to be useful for realizing highly reliable devices     

Theoretical model for flash generation

Reduction of flash generated in a gas vent is of great concern for manufacturers of electronic parts. The present study proposes a theoretical model for flash generation through consideration of flow characteristics in a gas vent. The model predicts the factors controlling flash, i.e., material parameters such as zero‐shear viscosity, crystallization temperature, thermal conductivity, and heat capacity, and process parameters such as injection and mold wall temperatures, packing pressure, and the clearance of a gas vent. On the other hand, we measure the amount of flash generated in the molding of poly(phenylene sulfide) (PPS) composites containing glass fiber and spherical fillers (CaCO₃ or Al₂O₃). Flash reduces with decreasing size of spherical fillers. These experimental data are successfully interpreted using the flash model. Polym. Eng. Sci., 45:198–206, 2005. © 2005 Society of Plastics Engineers     

Evaluation of myocardial damage using 123I-BMIPP imaging in patients with vasospastic angina

The purpose of this study is to determine whether left ventricular dysfunction following coronary artery spasm by 123I-BMIPP myocardial imaging. To reveal the clinical efficacy of 123I-BMIPP SPECT, 20 patients with vasospastic angina were studied using resting, 3-hour delayed image with 123I-BMIPP and exercise, 3-hour delayed image with 201Tl SPECT. 123I-BMIPP uptake was decreased compared to 201Tl (discordant) in 12 patients (60%) and in 49/100 myocardial segments (49%). The extent and severity score in resting image with 123I-BMIPP were significantly larger than that in delayed image with 201Tl (p < 0.01). In 123I-BMIPP SPECT, the severity score in the latest ischemia were significantly larger than that in others. The incidence of a complete agreement of decreased 123I-BMIPP uptake and coronary artery spasm was significantly higher (75%) than that in 201Tl (28%, p < 0.01). Furthermore, compared to 201Tl uptake, decreased 123I-BMIPP uptake much more corresponded to reduced wall motion in 9 of patients with mismatching. The severity of regional wall motion abnormality was significantly correlated with severity score of 123I-BMIPP. Late redistribution in delayed image with 123I-BMIPP was seen in 6 patients. The regional washout rate and the severity of regional wall motion abnormality in 6 patients was significantly lower than that in others (p < 0.05). Thus, metabolic abnormality assessed by 123I-BMIPP is well associated with left ventricular asynergy and spastic region in patients with vasospastic angina. In conclusion, 123I-BMIPP SPECT may sensitively delineate the impaired myocardium following coronary artery spasm, and it is very useful in diagnosing and estimating the severity of vasospastic angina.     

Time-dependent deformation in an enhanced SiC/SiC composite

Time-dependent deformation in an enhanced SiC/SiC composite has been studied under constant load at high temperatures of 1200 °C, 1300 °C, and 1400 °C. Creep damage evolution was evaluated by a Young’s-modulus change of partial unloading and microscopic observation. The addition of the glassy phase in the matrix is very effective for protecting the composite from oxidation. The transient creep is dominant in creep life at all the temperatures. An empirical equation is proposed to describe creep behavior of the composite. It is found that creep activation energy increases with creep time at stresses lower than matrix cracking stress, but the activation energy remains constant at stresses higher than the matrix cracking stress. The creep strain rate of the composite is considered to be controlled by creep of fibers based on examining the time, strain, stress, and temperature dependencies of creep strain rates.     

Radiation tolerance for the SMASH-series front-end chips for a silicon micro-strip detector

The radiation tolerance for prototype front-end chips designed for a silicon micro-strip detector was examined with a ⁶⁰Co irradiation source to establish an allowable range of the radiation dose. The irradiated front-end chips were SMA²SH-64A, a 64-channel preamplifier array; SMA²SH-1, a single-channel preamplifier circuit with a comparator; and Control-C, a digital-control chip for the preamplifiers.     

Recovery retardation in equal channel angular pressed Al–Zr alloy during friction stir welding

The effect of Zr on reduction of hardness and microstructure in an FS weld of equal channel angular-pressed Al alloy was investigated. Zr addition to Al suppressed dynamic recovery in the thermomechanically affected zone and enabled retention of the high hardness of the ECA-pressed material throughout the weld.     

When West meets East: Contributions of Eastern traditions to the future of psychotherapy.

Discusses 2 interrelated traditions as they are reflected in contemporary and traditional approaches to psychotherapy in Japan. One uses various meditational and self-focusing instructional sets whose common goal is to facilitate the slowing down, deepening, and clearer focusing of sensory and interpersonal awareness. The 2nd tradition focuses on physical self-regulation and autonomic self-control through exercises that foster enhanced voluntary control over physical states and processes. Eastern psychology offers a set of practices that help the individual overcome the inherent selfishness of his/her isolated experience. The goals of such work include recognition of gratitude to important people in the client's life, rediscovery of the joy of meaningful work, and the experience of a unifying cosmic consciousness. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Strengths and ductility of Mo–TiC alloys after secondary recrystallization

A series of Mo–TiC alloys were heated in vacuum at 2473 K for 36 ks. First grain growth behavior was observed using a scanning electron microscope. Then effects of TiC addition on the strengths and ductility at low temperature were discussed from the viewpoints of chemical composition and grain structure.

Materials with TiC additions of not larger than 0.1% demonstrated a single-crystalline grain structure. Both yield and maximum strengths increased by TiC addition and consequently ductility was improved.     

Fast modular multiplications based on precomputations with lessmemory

A fast modular multiplication method based on precomputation is proposed for use in public-key cryptosystems. The proposed method can compute the Montgomery reduction TR¹ mod N only through additions. Furthermore, this is 6.4 times faster than the Montgomery method implemented in modular reduction with a 512 bit modulus when 2.1 MB of memory is used. This memory size is also only 1/4 of that required in the method proposed by Takenaka et al