Nitric oxide synergistically enhances DNA strand breakage induced by polyhydroxyaromatic compounds, but inhibits that induced by the Fenton reaction

This paper deals with the muscle force of the cervical spine in patients with cervical syndrome compared to the muscle activity in non-patients. It has thus been observed that both the flexors' and the extensors' force of the cervical spine is much greater in non-patients (the flexors' P < 0.01 and the extensors' P < 0.01). The precise measurements having been carried out by a dynamometer. The groups being tested comprised 50 persons each, 25 men and 25 women. The average age of the patients group was 43.1 years, namely between 21 and 57 years, while that of the non-patients group was 42.3 years, between 24 and 56 years. As regards the professional engagement of both groups and, accordingly, the strain on the cervical spine and the corresponding musculature, they were approximately the same.     

The T cell-directed CC chemokine TARC is a highly specific biological ligand for CC chemokine receptor 4

Thymus and activation-regulated chemokine (TARC) is a recently identified CC chemokine that is expressed constitutively in thymus and transiently in stimulated peripheral blood mononuclear cells. TARC functions as a selective chemoattractant for T cells that express a class of receptors binding TARC with high affinity and specificity. To identify the receptor for TARC, we produced TARC as a fusion protein with secreted alkaline phosphatase (SEAP) and used it for specific binding. By stably transfecting five orphan receptors and five known CC chemokine receptors (CCR1 to -5) into K562 cells, we found that TARC-SEAP bound selectively to cells expressing CCR4. TARC-SEAP also bound to K562 cells stably expressing CCR4 with a high affinity (Kd = 0.5 nM). Only TARC and not five other CC chemokines (MCP-1 (monocyte chemoattractant protein-1), RANTES (regulated upon activation, normal T cells expressed and secreted), MIP-1alpha (macrophage inflammatory protein-1alpha), MIP-1beta, and LARC (liver and activation-regulated chemokine)) competed with TARC-SEAP for binding to CCR4. TARC but not RANTES or MIP-1alpha induced migration and calcium mobilization in 293/EBNA-1 cells stably expressing CCR4. K562 cells stably expressing CCR4 also responded to TARC in a calcium mobilization assay. Northern blot analysis revealed that CCR4 mRNA was expressed strongly in human T cell lines and peripheral blood T cells but not in B cells, natural killer cells, monocytes, or granulocytes. Taken together, TARC is a specific functional ligand for CCR4, and CCR4 is the specific receptor for TARC selectively expressed on T cells.     

Determination of horseradish peroxidase concentration using the chemiluminescence of Cypridina luciferin analogue, 2-methyl-6-(p-methoxyphenyl)-3,7-dihydroimidazo[1,2-a]pyrazin-3-one

The chemiluminescence of the Cypridina luciferin analogue, 2-methyl-6-(p-methoxyphenyl)-3,7-dihydroimidazo[1,2-a]pyrazin++ +-3-one (MCLA) was observed at 462 nm in the presence of horseradish peroxidase (HRP) and the total spectrum of light emitted was found to depend linearly on HRP concentration. Methods for the determination of HRP concentration using the chemiluminescence was investigated. HRP could be detected in the range from 100 pmol/L to 100 nmol/L under the optimum condition, H2O2 (10 mmol/L) and MCLA (10 mumol/L) at pH 5.8.     

Carbon fiber from natural biopolymer Bombyx mori silk fibroin with iodine treatment

Carbon fibers were prepared from silk fibers after an iodine treatment and the carbon yield, fiber morphology, structure and mechanical properties were investigated. A single or multi-step carbonization process was used for the preparation. In the single step process, silk fibroin (SF) fibers were heated from 25 to 800 °C with a heating rate of 5 °C min⁻¹ under Ar atmosphere. However, the carbon fiber obtained was partially melted and was too fragile to handle. For better performance, SF fibers were treated with iodine vapor at 100 °C for 12 h and untreated and iodinated SF fibers were heated from 25 to 800 °C by a multi-step carbonization process, which was defined based on the optimum thermal degradation rate of silk. In this multi-step process, the carbon fibers obtained from iodinated SF were structurally intact and stable in appearance, and the carbon yield achieved was ca. 36 wt.%, much higher than the value for untreated SF. X-ray diffraction, Raman spectroscopy and transmission electron microscopic observation revealed that the obtained carbon fibers from both untreated and iodinated SFs had a basically amorphous structure. The strength of carbon fibers prepared from iodinated SF using the multi-step carbonization was considerably increased compared to that of untreated SF. According to viscoelastic measurement, by heating above 280 °C the iodine introduced intermolecular cross-linking of the SF, and its melt flow was inhibited which produced a higher yield and better performance of the carbon fiber.     

Self-aligned fabrication of single crystal diamond gated field emitter array

This paper describes a self-aligned fabrication process for diamond gated field emitter array (FEA). Utilizing the non-conformal coverage sputtering conditions of silicon oxide, an interesting “sphere on cone” structure is formed on diamond nano tip array, which is the key point of gate hole opening process. This structure causes shadowing at certain regions of side-wall during Ti / Au gate metal deposition. Removal of “sphere” by wet etching leads to the successful fabrication of a single crystalline diamond gated FEA. Scanning electron microscope observations reveal the fabrication of a uniform emitter array with tip radius of curvature (20 nm) and gate hole (1.4 μm). We also confirmed that no noticeable physical damage exists on tip. In field emission characteristics of the fabricated single crystal diamond gated FEA, gate voltage control of field emission current is realized.     

Fractionation and enrichment of CLA isomers by selective esterification with Candida rugosa lipase

A commercial product of CLA contains almost equal amounts of cis-9,trans-11 (c9,t11)-CLA and trans-10,cis-12 (t10,c12)-CLA. We attempted to enrich the two isomers by a two-step selective esterification using Candida rugosa lipase that acted on c9,t11-CLA more strongly than on t10,c12-CLA. An FFA mixture containing CLA isomers was esterified with an equimolar amount of lauryl alcohol in a mixture of 20% water and the lipase. When the esterification of total FA reached 50%, two isomers were fractionated in a good yield: t10,c12-CLA was enriched in FFA, and c9,t11-CLA was recovered in lauryl esters. The FFA were esterified again to enrich t10,c12-CLA. At 27.3% esterification of total FA, the t10,c12-CLA content in FFA increased to 64.8 wt% with 89.3% recovery: The ratio of the content of t10,c12-CLA to that of two isomers was 95.9%. Lauryl esters obtained by the single esterification were employed for enrichment of c9,t11-CLA. After the esters were hydrolyzed, the resulting FFA were esterified again with lauryl alcohol. At 62.0% esterification of total FA, the c9,t11-CLA content in lauryl esters increased to 73.3 wt% with 79.4% recovery: The ratio of the content of c9,t11-CLA to that of two isomers was 95.6%. In a 600-g-scale purification, molecular distillation was effective in separating the reaction mixture into lauryl alcohol, FFA, and lauryl ester fractions.     

Hydrothermal preparation of tailored hydroxyapatite

Hydrothermal vapor treatment method was applied for preparation of ceramic biomaterials. Hydroxyapatite (Ca₁₀(PO₄)₆(OH)₂; HA) ceramics prepared by sintering with random crystal surface have already been used as bone-repairing materials which can directly bond to natural bones. If materials of HA could have the tailored specific crystal surface, they should have the advantage of adsorptive activity and osteoconductivity in comparison with the sintered HA. In the present study, porous HA sheets of about 50 μm to 1 mm in thickness and porous HA granules of about 50 μm to 1 mm in size with tailored crystal surface were prepared by the hydrothermal vapor exposure method at temperatures below 200°C. Porous sheets and porous granules of HA with controlled crystal surface should be suitable for scaffold of cultured bone, for bone graft material and for drug delivery system (DDS).     

Sharpness and noise characteristics of a half‐mirror stereoscopic display

Stereoscopic displays are becoming popular in entertainment and industrial applications. We characterize the spatial resolution and noise properties of a stereoscopic display with a half‐mirror and passive polarizing glasses. The upper display images reflected off the mirror have slightly degraded sharpness and reduced high spatial‐frequency noise resulting in modulation transfer functions (MTFs) of 0.59 and 0.50 at the Nyquist frequency with corresponding noise power spectra (NPS) values of 4.79 × 10^?6 and 5.17 × 10^?6 mm² at 10 mm^?1 in the horizontal and vertical directions. These results are compared to the characteristics of the individual displays with MTF values of 0.64 and 0.53 and NPS values of 6.24 × 10^?6 and 5.87 × 10^?6 mm². The polarizing glasses cause minimal reduction in sharpness and high‐frequency noise. The MTFs in the upper images observed with glasses are decreased to 0.54 and 0.47, while the NPS are decreased to 2.86 × 10^?6 and 2.01 × 10^?6 mm². When both displays are turned on and using the mirror and glasses, the observed luminance for each eye is increased from the luminance of the individual displays owing to crosstalk. We find that sharpness and noise are not affected by the interaction between the displays at the particular geometry tested in this study.     

Preparation of Polymer-Based Nanocomposites Composed of Sustainable Organo-Modified Needlelike Nanoparticles and Their Particle Dispersion States in the Matrix

Polymer-based nanohybrid materials were created using sustainable sepiolite clay composed from ubiquitous elements. Although sepiolite is generally recognized as a fibrous natural clay mineral, it turned out to be an acicular microcrystal because of the organo-modification of the outermost surface. Surface modification was performed using phosphonic acid derivatives containing hydrocarbon chains or fluorocarbon chains. Formation of a bidentate bond enhanced the desorption temperature and made nanocomposite preparation possible by melt compounding with polymers having a high melting point. As a result of organo-modification, amphiphilic sepiolite was obtained, and nanodispersion in an organic solvent was achieved. This technology was useful for detailed evaluation of sepiolite morphology. The nanocomposite of crystalline polymers/organo-modified sepiolites achieved uniform dispersion of these nanofillers in the matrix polymer. The introduction of 1 wt% nanofillers did not impair the transparency of the matrix polymer. As a result, a lamellae structure of the polymer developed, the crystallinity increased, and the mechanical properties improved. In addition, the crystallization temperature was improved, indicating that organo-modified sepiolites may act as a nucleating agent. It was found that sepiolite nanofiller with a highly aggregated tendency can achieve a well-nanodispersed state, even in phase-separable fluoropolymers, by applying fluorocarbon modification. POLYM. ENG. SCI., 60:541–552, 2020. © 2019 Society of Plastics Engineers