RanGen: A Random Network Generator for Activity-on-the-Node Networks

In this paper, we describe RanGen, a random network generator for generating activity-on-the-node networks and accompanying data for different classes of project scheduling problems. The objective is to construct random networks which satisfy preset values of the parameters used to control the hardness of a problem instance. Both parameters which are related to the network topology and resource-related parameters are implemented. The network generator meets the shortcomings of former network generators since it employs a wide range of different parameters which have been shown to serve as possible predictors of the hardness of different project scheduling problems. Some of them have been implemented in former network generators while others have not.     

Study of direct and indirect naphtha recycling to a resid FCC unit for maximum propylene production

To satisfy the increasing propylene demand, direct and indirect naphtha recycling schemes around an existing resid fluid catalytic cracking (FCC) unit were investigated. To this aim, light cracked naphtha (LCN), heavy cracked naphtha (HCN) and a PolyNaphtha (PN) oligomerisation product were cracked under a wide range of operating conditions over a commercial Y zeolite based equilibrium catalyst. Experimental data were acquired in three different units: a fixed bed bench scale unit, a fixed fluidised bed unit and an adiabatic circulating fluidised bed pilot plant. It was shown that FCC naphthas require high operating severities to crack, and that even then their conversion remains relatively moderate. Hence, direct recycling to the main riser does not seem a viable pathway to increase propylene product. Feeding FCC naphthas to a second reaction zone operating at high severity allows to increase the propylene yield in a significant manner. Increasing conversion, however, not only leads to higher LPG and propylene yields, but also results in very high dry gas yields. An alternative scheme was proposed, in which the olefinic C₄ and C₅ fractions are converted into a naphtha fraction through oligomerisation in a dedicated unit before being recracked in the secondary riser. As the highly olefinic oligomerised effluent mainly consist of dimerised and trimerised butenes and pentenes, this feed is more easily cracked and high conversions can be achieved. This indirect interconversion of butenes and pentenes into propylene therefore effectively allows to convert these butenes and pentenes into propylene, resulting in a significant increase in propylene yield. Each of the three main naphtha recycle options (directly to the main riser, directly to a secondary riser or indirectly via a light olefin oligomerisation unit) have been analysed and compared to a base case. In the evaluation of each of these schemes, all heat balance effects, both on the riser and the regenerator side, have been accounted for. The proposed process scheme with an indirect recycle via an oligomerisation unit enhances the already inherent flexibility of the FCC unit. The naphtha recycle can be turned on or off, the second reaction zone can be used to crack naphtha or to crack resid feed to maximise throughput, while the effluent of the oligomerisation unit can be recycled to the FCC unit for propylene production or hydrogenated and sent to gasoline and kerosene pool.     

A case of cognac adulteration

Summary Linear discriminant analysis of GLC-aromagram data is used to separate several classes of wine distillates, namely cognac, armagnac and brandy. In this paper we demonstrate how this method was used to detect adulteration. The adulteration was confirmed by the presence of ethyl heptanoate and limonene, which are well-known flavour compounds. They were analysed by means of a Purge and Trap headspace technique. Mass spectrometry was used to identify these flavours.

---

Ein Beispiel für die Verfälschung von Cognac

Zusammenfassung Die Linear-Discriminanz-Analyse von GLC-Aromagramm-Daten wird zur Klassifizierung von Weindestillaten wie Cognac, Armagnac und Brandy verwendet. In dieser Arbeit werden mit dieser Methode Verfälschungen nachgewiesen, die durch die Gegenwart der Ethylester der Heptansäure und des Limonen belegt werden konnten. Diese Substanzen wurden mit der Purge- und Trap-Methode erfaßt und massenspektrometrisch identifiziert.

     

New constructions of OSBE schemes and their applications in oblivious access control

Oblivious signature-based envelope (OSBE) schemes have demonstrated their potential applications in the protection of users privacy and rights. In an OSBE protocol, an encrypted message can only be decrypted by the receiver who holds a valid signature on a public message, while the sender (encrypter) does not know whether the receiver has the signature or not. Our major contributions in this work lie in the following aspects. We improve the notion of OSBE so that a valid credential holder cannot share his/her credential with other users (i.e., all-or-nothing non-transferability). We clarify the relationship between one-round OSBE and identity-based encryption (IBE) and show that one-round OSBE and semantically secure IBE against the adaptively chosen identity attack (IND-ID-CPA) are equivalent, if the signature in the OSBE scheme is existentially unforgeable against adaptively chosen message attacks. We propose an oblivious access control scheme to protect user privacy without the aid of any zero-knowledge proof. Finally, we also highlight some other novel applications of OSBE, such as attributed-based encryption.     

Experimental research and prediction of the effect of chemical and biogenic sulfuric acid on different types of commercially produced concrete sewer pipes

New equipment and procedures for chemical and microbiological tests, simulating biogenic sulfuric acid corrosion in sewerage systems, are presented. Subsequent steps of immersion and drying, combined with mechanical abrasion, were applied to simulate events occurring in sewer systems. Both chemical and microbiological tests showed that the aggregate type had the largest effect on degradation. Concrete with limestone aggregates showed a smaller degradation depth than did the concrete with inert aggregates. The limestone aggregates locally created a buffering environment, protecting the cement paste. This was confirmed by microscopic analysis of the eroded surfaces. The production method of concrete pipes influenced durability through its effect on W/C ratio and water absorption values. In the microbiological tests, HSR Portland cement concrete performed slightly better than did the slag cement concrete. A possible explanation can be a more rapid colonisation by microorganisms of the surface of slag cement samples. A new method for degradation prediction was suggested based on the parameters alkalinity and water absorption (as a measure for concrete porosity).     

Securing DSR against wormhole attacks in multirate ad hoc networks

A wormhole attack is one of the hardest problems to detect whereas it can be easily implanted in any type of wireless ad hoc network. A wormhole attack can easily be launched by the attacker without having knowledge of the network or compromising any legitimate nodes. Most existing solutions either require special hardware devices or make strong assumptions in order to detect wormhole attacks which limit the usability of these solutions. In this paper, we present a security enhancement to dynamic source routing (DSR) protocol against wormhole attacks for ad hoc networks which relies on calculation of round trip time (RTT). Our protocol secures DSR against a wormhole attack in ad hoc networks for multirate transmissions. We also consider the processing and queuing delays of each participating node in the calculation of RTTs between neighbors which to date has not been addressed in the existing literature. This work provides two test cases that show that not taking multirate transmission into consideration results in miss identifying a wormhole attack.     

A mass spectrometric strategy for profiling glycoproteinoses, Pompe disease, and sialic acid storage diseases

Glycoproteinoses, Pompe disease, and sialic acid storage diseases are characterized by a massive accumulation of unprocessed oligosaccharides and/or glycoconjugates in urine. The identification of these glycocompounds is essential for a proper diagnosis. In this study, we investigated the potential of MALDI‐TOF‐MS to identify glycocompounds present in urine from patients with different inborn errors of glycan metabolism. Urinary glycocompounds were permethylated, and analyzed using GC‐MS and MALDI‐TOF‐MS. In order to confirm tentative assignments, a second aliquot of urine was purified on a C18 Sep‐Pak cartridge and glycocompounds were desalted on a column of nonporous graphitized carbon. The glycocompounds were then sequentially on‐plate digested using an array of exoglycosidases. A range of disease‐specific oligosaccharides as well as glycopeptides was identified for all oligosacchariduria models. In addition, free sialic acid accumulated in urine from a patient suffering from French‐type sialuria, has been detected by a GC‐MS approach, which could be applied to other sialic acid storage diseases. This procedure is simple, and can be performed in few simple steps in less than 24 h. This current method can be applied for newborn screening for other inherited metabolic diseases as well as for assessing treatments in clinical trials.     

Evaluation and thermodynamic calculation of ureolytic magnesium ammonium phosphate precipitation from UASB effluent at pilot scale

The removal of phosphate as magnesium ammonium phosphate (MAP, struvite) has gained a lot of attention. A novel approach using ureolytic MAP crystallization (pH increase by means of bacterial ureases) has been tested on the anaerobic effluent of a potato processing company in a pilot plant and compared with NuReSys(?) technology (pH increase by means of NaOH). The pilot plant showed a high phosphate removal efficiency of 83 ± 7%, resulting in a final effluent concentration of 13 ± 7 mg · L(-1) PO(4)-P. Calculating the evolution of the saturation index (SI) as a function of the remaining concentrations of Mg(2+), PO(4)-P and NH(4)(+) during precipitation in a batch reactor, resulted in a good estimation of the effluent PO(4)-P concentration of the pilot plant, operating under continuous mode. X-ray diffraction (XRD) analyses confirmed the presence of struvite in the small single crystals observed during experiments. The operational cost for the ureolytic MAP crystallization treating high phosphate concentrations (e.g. 100 mg · L(-1) PO(4)-P) was calculated as 3.9 € kg(-1) P(removed). This work shows that the ureolytic MAP crystallization, in combination with an autotrophic nitrogen removal process, is competitive with the NuReSys(?) technology in terms of operational cost and removal efficiency but further research is necessary to obtain larger crystals.