Fabrication, assembly, and characterization of molecular electronic components

One of the ultimate miniaturizations in nanotechnology is molecular electronics, where devices will consist of individual molecules. There are many complications associated with the use of molecules in electronic devices, such as the electronic perturbations in the molecule associated with being bonded to an electrode, how electrons traverse the metal-molecule junction, and the difficulty of macroscopically addressing single to very few molecules. Whether fabricating a test structure or a usable device, the use of self-assembly is fundamental to the fabrication of molecular electronic devices. We will discuss how to fabricate self-assembled monolayers into test assemblies and how to use intermolecular interactions to direct molecules into desired positions to create nanostructures and to connect functional molecules to the outside world. These assemblies serve as test structures for measurements on single or bundled molecules. The development of several experimental techniques, including various scanning probes, mercury drop junctions, break junctions, nanopores, crossed wires, and other techniques using nanoparticles have enabled the ability to test these structures and make reproducible measurements on single molecules. Many of these methods have been developed to test molecules with potential for integration into devices such as oligo (phenylene-ethynylene) molecules and other /spl pi/-conjugated molecules, in ensemble or single-molecule measurements.     

Phase behavior of ternary blends containing dimethylpolycarbonate,tetramethylpolycarbonate and poly[styrene‐co‐(methyl methacrylate)] copolymers (or polystyrene)

The miscibility and phase behavior of ternary blends containing dimethylpolycarbonate (DMPC), tetramethylpolycarbonate (TMPC) and poly[styrene‐co‐(methyl methacrylate)] copolymer (SMMA) have been explored. Ternary blends containing polystyrene (PS) instead of SMMA were also examined. Blends of DMPC with SMMA copolymers (or PS) did not form miscible blends regardless of methyl methacrylate (MMA) content in copolymers. However, DMPC blends with SMMA (or PS) blends become miscible by adding TMPC. The miscible region of ternary blends is compared with the previously determined miscibility region of binary blends having the same chemical components and compositions. The region where the ternary blends are miscible is much narrower than that of binary blends. Based on lattice fluid theory, the observed phase behavior of ternary blends was analyzed. Even though the term representing the Gibbs free energy change of mixing for certain ternary blends had a negative value, blends were immiscible. It was revealed that a negative value of the Gibbs free energy change of mixing was not a sufficient condition for miscible ternary blends because of the asymmetry in the binary interactions involved in ternary blends. Copyright © 2004 Society of Chemical Industry     

Low Temperature Acoustic Properties of Poly-Crystalline Aluminium

As in other structurally disordered solids, the low temperature acoustic properties of poly-crystalline aluminium are governed by atomic two-level tunneling systems. The particular temperature variation of sound velocity and internal friction depends on the dynamical behaviour of these tunneling systems, which is expected to be determined by interaction with thermal phonons and conduction electrons as in metallic glasses. In earlier measurements on aluminium-wires no significant difference was found whether the sample was superconducting or kept in the normal state by a sufficiently high magnetic field and the concluding claim was ‘absence of electron-assisted relaxation for tunneling systems in poly-crystalline metals’. In this report, vibrating reed measurements are presented of pure poly-crystalline Al with a special sample shape that reduces the influence of the clamping. We in fact find significant differences between the sample being normal conducting or superconducting. The overall behaviour indeed resembles very closely that of metallic glasses and clearly demonstrates that also in Al tunneling systems couple to conduction electrons as expected. As a quantitative result we may state that the density of states of tunneling systems in poly-crystalline Al is considerably smaller than in metallic glasses. PACS numbers: 61.43.-j, 62.65.+k, 63.50.+x     

Relationship between the genomic organization and the overlapping embryonic expression patterns of the zebrafish dlx genes

To understand the relationship between the expression and the genomic organization of the zebrafish dlx genes, we have determined the genomic structure of the dlx2 and dlx4 loci. This led to the identification of the zebrafish dlx1 and dlx6 genes, which are closely linked to dlx2 and dlx4, respectively. Therefore, the inverted convergent configuration of Dlx genes is conserved among vertebrates. Analysis of the expression patterns of dlx1 and dlx6 showed striking similarities to those of dlx2 and dlx4, respectively, the genes to which they are linked. Furthermore, the expression patterns of dlx3 and dlx7, which likely constitute a third pair of convergently transcribed genes, are indistinguishable. Thus, the overlapping expression patterns of linked Dlx genes during embryonic development suggest that they share cis-acting sequences that control their spatiotemporal expression. The evolutionary conservation of the genomic organization and combinatorial expression of Dlx genes in distantly related vertebrates suggest tight control mechanisms that are essential for their function during development.     

Phacoemulsification with a bevel-down phaco tip: phaco-drill

We present a technique for in situ lens nucleus emulsification using low phaco power and high vacuum, a continuous curvilinear capsulorhexis, and hydrodelineation. Emulsification is done with the phaco tip slanted down 30 or 45 degrees. Cutting and aspiration do not cause an undesirable energy loss. This technique can be combined with the nuclear chopping or divide and conquer methods because of its ability to drill and hold the nucleus. Posterior capsular rupture is prevented because the separated epinucleus acts as a barrier between the nucleus and the cortex. The low power used minimizes the energy transfer to the corneal endothelium. This technique is particularly useful in eyes with brunescent cataract.     

Decomposition of electromagnetic boundary conditions at planarinterfaces with applications to TE and TM field solutions

Electromagnetic fields in homogeneous source-free regions can be decomposed into fields that are TE and TM with respect to a particular reference direction (e.g., the z direction). If transverse sources exist, both TE and TM fields may be excited simultaneously. This paper considers the case of two infinite regions having a common planar interface and prescribed sources (surface currents) on the interface. The source currents are decomposed in a manner consistent with the decomposition of the fields. Accordingly, a procedure is established for describing the boundary conditions at the interface in terms of the longitudinal field components E_z, H_z and the surface currents J¯_s. The development is unique in that the continuity of the transverse field components at the boundary are not explicitly considered but interpreted in terms of z-directed fields. This boundary condition approach is shown to give results consistent with those obtained by matching the tangential fields at the interface using vector transforms. A simple example illustrating the procedure using a ring of current in free-space is presented     

Rapid identification of protein phosphatase 1-binding proteins by mixed peptide sequencing and data base searching. Characterization of a novel holoenzymic form of protein phosphatase 1

Microcystin-affinity chromatography was used to purify 15 protein phosphatase 1 (PP1)-binding proteins from the myofibrillar fraction of rabbit skeletal muscle. To reduce the time and amount of material required to identify these proteins, proteome analysis by mixed peptide sequencing was developed. Proteins are resolved by SDS-polyacrylamide gel electrophoresis, electroblotted to polyvinylidene fluoride membrane, and stained. Bands are sliced from the membrane, cleaved briefly with CnBr, and applied without further purification to an automated Edman sequencer. The mixed peptide sequences generated are sorted and matched against the GenBank using two new programs, FASTF and TFASTF. This technology offers a simple alternative to mass spectrometry for the subpicomolar identification of proteins in polyacrylamide gels. Using this technology, all 15 proteins recovered in PP-1C affinity chromatography were sequenced. One of the proteins, PP-1bp55, was homologous to human myosin phosphatase, MYPT2. A second, PP-1bp80, identified in the EST data bases, contained a putative PP-1C binding site and a nucleotide binding motif. Further affinity purification over ATP-Sepharose isolated PP-1bp80 in a quaternary complex with PP-1C and two other proteins, PP-1bp29 and human p20. Recombinant PP-1bp80 also bound PP-1C and suppressed its activity toward a variety of substrates, suggesting that the protein is a novel regulatory subunit of PP-1.