Experimental study of bubbly swirling flow in a vertical tube using ultrasonic velocity profiler (UVP) and wire mesh sensor (WMS)

Two-phase air-water bubbly swirling flow through a pipe is a complex turbulent flow and its prediction is still challenging. The present paper describes the experimental investigation of the air-water bubbly swirling flow in vertical co-current flow. Swirling flow is induced by a twisted tape in a 20 mm inner diameter pipe. The flow is investigated using Ultrasonic velocity profiler (UVP), which allows the measurement of liquid and gas velocities simultaneously. Furthermore, simultaneous measurement of void fraction is performed using Wire mesh sensor (WMS). The experimental results reveal that swirling flow has significant impact on bubbles’ distribution. In low liquid flow rate, the average bubble velocity is fairly uniform along the radial position and void fraction increases in the near wall region. However, increasing liquid flow rate at constant gas flow rate leads to increase in void fraction in the core region, this is mainly due to drift velocity which is affected by centrifugal force. Experimental findings and parametric trends based on the effects of swirling flow are summarized and discussed.     

Processing and 3D printing of SiCN polymer-derived ceramics

Preceramic polymer resins are attractive for the 3D printing of net-shaped ceramic components. Recently various processes have been demonstrated for 3D printing of polymer-derived ceramics (PDCs). Ultimately in these processes, the process outcomes strongly depend on the process parameters. In particular, for PDCs the ceramic density, and ceramic yield are affected by the catalyst concentration and cross-linking duration. Here, we use thermal analysis and FTIR to quantify the interrelation of the process parameters on the process outcome for polysilazanes and demonstrate 3D printing of PDC components based on the best-identified process parameters. The results of this work can be used as guidelines for future additive manufacturing of PDCs.     

Investigation of radiation-induced surface activation effect in austenitic stainless steel under ultraviolet and γ-ray irradiations

The radiation-induced surface activation (RISA) effect will be applied to the core design in supercritical light water reactor (SCWR) in order to achieve a high performance with excellent economy and safety. The purpose of the present study is to investigate the RISA effect in the candidate fuel cladding materials in SCWR such as PNC1520. The change of weldability due to RISA effect and the related microstructure analysis were performed in oxidized PNC1520 and 304 stainless steel with various oxidization periods. The phases contained in the surface oxide layer of the present specimen were identified as Fe₂CrO₄, γ-Fe₂O₃, and Fe₂O₃. The lifetime of 13.8 days for wettability improving factor was confirmed in the ultraviolet (UV) irradiation. Meanwhile, the long life of 13.8 days and short life of 0.8 days for wettability improving factors were identified in the γ-ray irradiation. Based on the fact that the band gap energies of Fe₂CrO₄, γ-Fe₂O₃, and Fe₂O₃ were, respectively, 2.1, 2.0, and 2.2 eV, and the photo energies of UV and γ-ray irradiation were 4.48 eV and 13.3 MeV, it is therefore clarified that the hydrophilization on the oxide layer is ascribed to the RISA effect.     

Microorganisms in landfill bioreactors for accelerated stabilization of solid wastes

Landfill bioreactors (LBRs) with management of leachate and biogas have presented numerous advantages such as accelerated stabilization of solid wastes, reduced amount of leachate, and in situ leachate treatment. Such advantages have minimized environmental risks, have allowed extension of the useful life of the landfill site, and have fostered cost reduction. LBRs of three types have been developed using both anaerobic and aerobic modes: anaerobic, aerobic, and hybrid. Microorganisms in landfills cause various reactions related with organic fractions and heavy metals. Such functions have been stimulated in LBRs by recirculation of leachate with or without aeration. To date, most studies of microorganisms in LBRs have analyzed bacteria and archaea based on 16S rRNA genes and have analyzed fungi based on 18S rRNA genes from a taxonomical viewpoint. Indicator genes for specific functions in LBRs such as nitrification, denitrification, and methane production have also been monitored. The population dynamics of microorganisms in LBRs have been partially clarified, but the obtained data remain limited because of highly heterogeneous features of solid wastes inside LBRs. Systematic monitoring of microorganisms should be established to improve LBR performance.     

Preparation of sharp-melting hard palm midfraction and its use as hard butter in chocolate

Preparation of hard palm midfractions (PMF) and its use as a cocoa butter equivalent ingredient were studied. Hard PMF is obtained by multistep fractionation of palm oil involving dry fractionation (DF) and/or solvent fractionation (SF), usually using hexane or acetone. From our experience, in acetone, a polar solvent, symmetrical 1,3-disaturated triacylglycerols tend to selectively crystallize more than nonsymmetrical 1,2- or 2,3-disaturated triacylglycerols, making it suitable for obtaining the solid midfraction. Unfortunately, triacylglycerols are very soluble in hexane, and temperatures at least 15 degrees lower than those required for acetone must be used for equivalent crystal yields. On the other hand, DF is a less expensive and safer process. Thus, multistep fractionation combining DF and SF using acetone was developed to achieve sufficient removal of high-melting components, and further enrichment of 1,3-dipalmitoyl-2-oleoylglycerol and the hard PMF was obtained by triple-step fractionation of palm olein or double-step fractionation of soft PMF. Compared to conventional hard PMF, this hard PMF had a steeper melting curve and better snapping and sharp-melting qualities when used in chocolate. Heat resistance of the hard PMF chocolate was similar to the conventional hard PMF chocolate, and its bloom resistance could be improved by adding polyglycerol fatty acid esters.     

Evaluation of hydrogen metabolism by Escherichia coli strains possessing only a single hydrogenase in the genome

The four hydrogenase isozymes; hydrogenase 1 (Hyd-1), hydrogenase 2 (Hyd-2), hydrogenase 3 (Hyd-3) and hydrogenase 4 (Hyd-4) of Escherichia coli have been reported for their crucial functions in the hydrogen metabolism; however, their distinctive roles could not be completely understood. In this study, four ideal hydrogenase operon mutants, Δhyb hyc hyf, Δhya hyc hyf, Δhya hyb hyf, and Δhya hyb hyc, in which only a single hydrogenase is intact in the genome, were constructed as well as one quadruple mutant (Δhya hyb hyc hyf) that all four hydrogenase operons were deleted. First, single operon mutants and single-gene mutants for each hydrogenase showed different hydrogen productivity and growth in the anaerobic fermentation, indicating that bacterial phenotype regarding the hydrogen metabolism via the deletion of each operon is different with that of each single gene. Then, 4 triple hydrogenase operon mutants and one quadruple mutant were investigated to evaluate the hydrogen metabolism (hydrogen production and uptake) using glucose or glycerol as a substrate of hydrogen fermentation. With both the carbon sources, only Hyd-2 and Hyd-3 were able to produce hydrogen. Furthermore, all the hydrogenases showed hydrogen uptake activity. In addition, no hydrogen production and hydrogen uptake were detected in the quadruple mutant which does not have all 4 hydrogenases. Hydrogen production from Hyd-2 and Hyd-3 was further confirmed by complementing their operons in the cloning vector pBR322.     

The Potential Role of Hepatocyte Growth Factor in Degenerative Disorders of the Synovial Joint and Spine

This paper aims to provide a comprehensive review of the changing role of hepatocyte growth factor (HGF) signaling in the healthy and diseased synovial joint and spine. HGF is a multifunctional growth factor that, like its specific receptor c-Met, is widely expressed in several bone and joint tissues. HGF has profound effects on cell survival and proliferation, matrix metabolism, inflammatory response, and neurotrophic action. HGF plays an important role in normal bone and cartilage turnover. Changes in HGF/c-Met have also been linked to pathophysiological changes in degenerative joint diseases, such as osteoarthritis (OA) and intervertebral disc degeneration (IDD). A therapeutic role of HGF has been proposed in the regeneration of osteoarticular tissues. HGF also influences bone remodeling and peripheral nerve activity. Studies aimed at elucidating the changing role of HGF/c-Met signaling in OA and IDD at different pathophysiological stages, and their specific molecular mechanisms are needed. Such studies will contribute to safe and effective HGF/c-Met signaling-based treatments for OA and IDD.     

Investigation on the Interactions between Self-Assembled β-Sheet Peptide Nanofibers and Model Cell Membranes

Self-assembled peptide nanofibers (NFs) obtained from β-sheet peptides conjugated with drugs, including antigenic peptides, have recently attracted significant attention. However, extensive studies on the interactions of β-sheet peptide NFs with model cell membranes have not been reported. In this study, we investigated the interactions between three types of NFs, composed of PEG-peptide conjugates with different ethylene glycol (EG) lengths (6-, 12- and 24-mer), and dipalmitoylphosphatidylcholine (DPPC) Langmuir membranes. When increasing the EG chain length, those interactions significantly decreased considering measurements in the presence of the NFs of: (i) changes in surface pressure of the DPPC Langmuir monolayers and (ii) surface pressure–area (π–A) compression isotherms of DPPC. Because the observed trend was similar to the EG length dependency with regard to cellular association and cytotoxicity of the NFs that was reported previously, the interaction of NFs with phospholipid membranes represented a crucial factor to determine the cellular association and toxicity of the NFs. In contrast to NFs, no changes were observed with varying EG chain length on the interaction of the building block peptide with the DPPC membrane. The results obtained herein can provide a design guideline on the formulation of β-sheet peptide NFs, which may broaden its potential.     

Dietary CLA and DHA modify skin properties in mice

This study investigated the influence of PUFA on the properties of mouse skin. Mice (3 wk old) were given free access to oils high in linoleic acid, CLA, or DHA for 4 wk. At the end of the experiment, their skins were compared by both biochemical and histological methods. No significant differences in lipid and collagen contents were detected among treatments, although the FA composition in the skin was altered depending upon the FA composition of the supplemented oils. Electron microscopy revealed that the subcutaneous tissue layers in the CLA and DHA groups were significantly thinner than that in the high linoleic acid group, whereas no differences in the thickness of dermis layers were observed among the three groups. These results suggest that skin properties in mice are readily modified by dietary FA sources within 4 wk of dietary oil supplementation.     

Two-step migration of particles in evaporating bimodal suspension films at high Peclet numbers

During the drying of bimodal colloidal suspensions containing particles of various sizes, smaller particles preferentially migrate to the top surface under particular drying conditions, leading to undesirable drying defects in batteries and in other coating applications. Despite extensive previous studies, the migration mechanism is far from being understood because few in situ observations are available to support the hypotheses. To remedy this, we use real-time photoluminescence (PL) microscopy to investigate the migration of small fluorescent latex particles co-dispersing with large nonemissive latex particles. Comparing the measured PL intensity with that predicted by a model allows us to determine the quantity of small particles near the evaporating surface. The results reveal that the fluorescent particles segregate in two steps: The primary segregation occurs early in the evaporation stage, whereas the secondary stepwise migration occurs when the air–liquid interface invades the particle consolidation layer. The latter migration is attributed to the flow-induced motion of small particles that move through interstitial spaces between large particles.