Thermomechanical behaviour of composites

This paper derives the governing equations for the thermomechanical behaviour of composites. When the basic equations for the thermoelastic behaviour of solids were first derived in the nineteenth century several approximations were made. The effect of these assumptions are discussed and illustrated by the results of a simple laboratory test. The implications of this work on the analysis of impact damaged laminates are then discussed.     

Development of Stretch Solder Interconnections for Wafer Level Packaging

A wafer level packaging technique has been developed with an inherent advantage of good solder joint co-planarity suitable for wafer level testing. A suitable weak metallization scheme has also been established for the detachment process. During the fabrication process, the compliancy of the solder joint is enhanced through stretching to achieve a small shape factor. Thermal cycling reliability of these hourglass-shaped, stretch solder interconnections has been found to be considerably better than that of the conventional spherical-shaped solder bumps.     

Analysis of composite laminates with transverse cracks

The analysis of the behaviour of composite laminates with general balanced lay-up sequences and containing distributed transverse cracks is discussed and demonstrated in this paper. It is shown that a constitutive model of damage for composites, which has been successfully used to analyse the effects of uniformly distributed transverse cracks in cross-ply laminates, can be readily extended to the analysis of uniformly distributed transverse cracks in more general symmetric laminates. The further extension of the theory to non-uniformly distributed damage can be achieved by finite element analysis. It is shown that the finite element implementation of the theory is particularly simple since the contribution of the damage to the overall behaviour can be incorporated into the force vectors.     

压阻式压力传感器及其应用电路设计

介绍了压阻式传感器的工作原理以及相关应用电路，并给出了一个应用示例加以说明。     

Swelling properties of chemically modified oil palm empty fruit bunch based polyurethane composites

In this study, the diffusion of various types of solvent in oil palm empty fruit bunch/polyurethane composites, produced from chemically modified empty fruit bunches, was investigated. The solubility parameters and polymer–solvent interaction parameters of the produced composites were determined. The void contents of the composites were also determined before swelling tests to eliminate the free solvent present in the system. From the results obtained, we found that the diffusion of the solvents was dependent on the compatible group available and the voids present in the system. The solubility parameters of the empty fruit bunch/polyurethane composites with different degrees of chemical modification were 11.6 and 11.7 (cal/cm^?3)^1/2. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Water bamboo husk reinforced poly(lactic acid) green composites

The water bamboo husk is one of major agricultural wastes in Taiwan. In this study, the powder obtained from the water bamboo husk was added to poly(lactic acid) (PLA) to form novel reinforced biodegradable composites. Morphologies, mechanical properties, and heat resistance of these water bamboo powder reinforced composites were investigated. The results indicate that the char yields were increased as plant powder was incorporated to PLA. In addition, the mechanical properties were also enhanced due to the addition of powders. The increments of storage moduli of PLA were about 50–200%. Moreover, the increments of loss moduli of PLA were about 70–200%. On the other hand, the T_g of PLA was slightly decreased by the addition of powder, and this may improve the brittle characteristics of PLA. Furthermore, this type of reinforced PLA would be more environmental friendly than the artificial additive‐reinforced one. POLYM. ENG. SCI., 2008. © 2008 Society of Plastics Engineers     

Application of the T-integral and S criteria in finite element analysis of impact damage at fastener holes in graphite/epoxy laminates under compression

This paper illustrates the application of two fracture criteria, Atluri's T^*-integral and Sih's strain energy density factor S for estimating the residual strength of an impact damaged fastener hole in a composite laminate. Finite element analyses are performed, and the magnitude and distribution of T^* and S are determined around the delamination. It is found that the profiles of these distributions are extremely complex and sensitive to the modelling of the stress fields close to the delamination. The effects of local closure, shear moduli and cracktip singularity are investigated. It is also shown that the representation of the stress singularity in the finite element model has a strong effect on the distribution of T^* and S. The distribution of both T^* and S is such that three local maxima occur and are situated at the same locations around the delamination. These locations approximately coincide with the points of maximum growth as revealed by ultrasonic C-scan of the damage growth of several specimens. The T^*-integral is shown to be more sensitive to the values of interlaminar shear moduli than S. The results of the analyses suggest that both the T^*-integral and S criteria may be successfully employed in the prediction of residual strength. However, S is better at predicting the direction of damage growth provided the stress fields near the delamination can be accurately modelled.     

Design of Filter Banks/Wavelets Using TROV: A Survey

The design problem of multirate filter banks can be divided into two parts. The first part involves the issue of reconstruction error of the signal which consists of three components—aliasing, magnitude, and phase. The second part of the design problem involves the issue of designing good-quality subband filters. There has been a lot of research addressing the first part but there are relatively few good and simple design techniques for the second part. There is a class of techniques which we will refer to as TROV (TRansformation Of Variables) which satisfactorily addresses the two parts of the design problem. Techniques which fall under this class include the McClellan Transformation, Generalized Transformation of Variables, and Frequency Rotation. A survey of the design techniques proposed by different authors in the literature which falls under this class is presented here. First, the similarity and differences of the approaches adopted by different authors is studied. Second, it is shown that the different approaches can be unified. An extension to the design technique is presented which will enhance its flexibility and effectiveness.