Accurate estimation of capacities and cross-traffic of all links in a path using ICMP timestamps

The estimation of the link capacity and its available bandwidth in an end-to-end path is crucial for network management, admission control and flow control for adaptive applications. This paper introduces an estimation mechanism able to accurately estimate the available bandwidth of all links in an end-to-end path, through its capacity and cross-traffic estimation. The estimation procedures resort to the dispersions of packet pairs and trains using the concepts of ICMP Timestamp and Traceroute that, efficiently used together, enable the measurement of the dispersions in all links in the path. These mechanisms were evaluated through simulation experiments, where we analyzed the influence of the several network parameters on each estimation mechanism. The results show that these estimation methods are able to accurately estimate both the capacity and the cross-traffic of all links in a path with moderate length and with low overhead.     

Atmospheric corrosion of reference metals in Antarctic sites

This paper presents the results obtained at three Antarctic test sites participating in the “Ibero-American Map of Atmospheric Corrosiveness” (MICAT), a project on atmospheric corrosion carried out during the period 1988–1994 at some 70 sites distributed across 12 countries of the Latin-American region, Spain and Portugal. The three Antarctic sites are located near the coastline.The singular climatic characteristics of Antarctic regions are related with the purity of the air, the absence of rainfall and the formation of ice on the metallic surface during an important part of the exposure time. However, electrochemical activity is possible below ice layers. This situation affects the structure and morphology of corrosion product films and the resulting corrosion rates of metallic surfaces.     

Mechanical improvement of concrete by irradiated polypropylene fibers

Fiber reinforced concrete (FRC) contains fibers physically mixed with gravel, sand, cement, and water. So far, adequate mechanical performance of FRC has been obtained at high cost and using complex technologies; important here is the geometry and surface characteristics of the polymers. We have modified polymeric‐fiber surfaces by using gamma radiation. Irradiated polypropylene (PP) fibers were submitted to 0, 5, 10, 50, and 100 kGy of gamma irradiation dosages. First, tensile strength of PP fibers was evaluated, and then fibers blended at 0, 1.0, 1.5, and 2.0% in volume with Portland cement, gravel, sand, and water. The highest values of compressive strength were obtained with irradiated‐fibers at 10 kGy and 1.5% in volume of fiber. The result is 101 MPa, as compared to 35 MPa for simple concrete without fibers. POLYM. ENG. SCI., 45:1426–1431, 2005. © 2005 Society of Plastics Engineers     

Developing maintainable expert systems using case-based reasoning

Abstract: Maintainability problems associated with traditional software systems are exacerbated in rule-based systems. The very nature of that approach — separation of control knowledge and data-driven execution — hampers maintenance. While there are widely accepted techniques for maintaining conventional software, the same is not true for rule-based systems. In most situations, both a knowledge engineer and a domain expert are necessary to update the rules of a rule-based system. This paper presents, first, an overview of the software engineering techniques and object-oriented methods used in maintaining rule-based systems. It then discusses alternate paradigms for expert system development. The benefits of using case-based reasoning (from the maintenance point of view) are illustrated through the implementation of a case-based scheduler. The main value of the scheduler is that its knowledge base can be modified by the expert without the assistance of a knowledge engineer. Since changes in application requirements can be given directly to the system by the expert, the effort of maintaining the knowledge base is greatly reduced.     

Do individual factors matter? A survey of scientists’ patenting in Portuguese public research organisations

This paper addresses scientists’ behaviour regarding the patenting of knowledge produced in universities and other public sector research organisations (PSROs). Recent years have witnessed a rapid growth in patenting and licensing activities by PSROs. We argue that the whole process depends to a certain extent on scientists’ willingness to disclose their inventions. Given this assumption, we conduct research into individual behaviour in order to understand scientists’ views concerning the patenting of their research results. Data from a questionnaire survey of Portuguese researchers from nine PSROs in life sciences and biotechnology is presented and analysed and complemented with in-depth interviews. The results reveal that overall the scientists surveyed show a low propensity to become involved in patenting and licensing activities, despite the fact that the majority had no “ethical” objections to the disclosure of their inventions and the commercial exploitation of these. Perceptions about the impacts of these activities on certain fundamental aspects of knowledge production and dissemination are however divergent. This may account for the low participation levels. Furthermore, most scientists perceived the personal benefits deriving from this type of activity to be low. Similarly, the majority also believed that there are many difficulties associated with the patenting process and that they receive limited support from their organisations, which lack the proper competences and structures to assist with patenting and licensing.     

Fifteen years of cutaneous and mucocutaneous leishmaniasis in Bolivia: a retrospective study

The photosensitizing properties of p-nitroacetophenone (PNAP), a well-known radiosensitizer, have been studied in near UV region. The mechanism of PNAP photosensitization has been investigated by testing the efficiency of singlet oxygen production using photooxidation of 2,2,6,6-tetramethylpiperidine (TEMP) and photodegradation of guanosine. In both the cases, the enhancement effect of deuterated solvents has been observed. Results of these experiments suggest the significant role of type II mechanisms in PNAP photosensitization.     

Medium and substitution pattern effects on the action of hydroxyflavones as photoprotectors against singlet molecular oxygen-mediated photooxidation of fats

The ability of mono-, di-, tri-and tetra-hydroxyflavones (7-and 3-hy-droxyflavones, 7, 8-dihydroxyflavone, baicalein and fisetin) to act as photoprotectors against singlet molecular oxygen [O²(Δ_g)]-initiated photooxidation of fats has been established by a kinetic study. The overall quenching rate constants for a series of five hydroxyflavones perfectly parallel their respective behaviour as inhibitors of the sensitized photooxidation of linoleic acid. The best antioxidative effect was exerted by 7-hydroxyflavone which does not chemically react with O²(¹Δ_g). Nevertheless for the remaining flavonoids of the series, the physical deactivation of O²(¹Δ_g) largely prevails over the chemical process. As for the cases of phenols and related hydroxy-aromatic derivatives, the ionization of the -OH group in the flavones, dramatically accelerates the rate of photooxidation. Under these conditions, the 7-hydroxyflavone also reacts effectively with O²(¹Δ_g). Given that flavonoids are natural oil components, this medium effect should be taken into account during the oil-refining process, in order to avoid the flavonoid photodestruction.     

Cyclooxygenase and lipoxygenase arachidonate metabolites synthesized by mouse peritoneal macrophages: in vitro effect of N-phenyllinoleamide from toxic oil samples

N-phenyllinoleamide (NPLA) has been detected as extraneous compound in adulterated cooking oils associated with a unique epidemic disease known as the Toxic Oil Syndrome (TOS). In this communication we report on the action of NPLA on the endogenous cyclooxygenase and lipoxygenase arachidonate metabolism. Results show that mouse peritoneal macrophages (MPM) exposed to 1 mM NPLA for 2 h undergo significant increases of 6-keto prostaglandin F1a, prostaglandin E2, leukotriene B4, 12- and 15-hydroxyeicosatetraenoic acids. MPM prelabelled with 3H-AA showed an enhanced release when exposed to NPLA. Thus, it is concluded that NPLA potentiates AA release from cell membrane phospholipids and the subsequent cyclooxygenase and lipoxygenase oxidative metabolism of this precursor to various eicosanoids. This is in agreement with the implication of peroxidative process mediated by fatty acids anilides in TOS.     

Evaluation of a new enzyme immunoassay for Clostridium difficile toxin A

AIM: To evaluate a new enzyme immunoassay (EIA) method for detection of Clostridium difficile toxin by comparing it to cytotoxicity assay. To investigate the nature of false negative and false positive EIA results by evaluating clinical and therapeutic parameters. METHODS: 737 consecutive diarrhoeal specimens collected from patients clinically suspected of having C difficile colitis were tested for the presence of C difficile toxin by EIA for toxin A and by cytotoxicity assay. Clinical data were evaluated in all cases positive by either method. RESULTS: With the cytotoxicity assay as a gold standard, the specificity of EIA for toxin detection was 99.3% and the sensitivity was 62.2%. No false negative EIA specimens were obtained from patients already being treated for C difficile colitis. Among patients with cytotoxicity positive specimens, those with EIA positive samples had no clinical features distinguishing them from patients with EIA negative samples. CONCLUSIONS: Although specific, the new EIA method directed against toxin A lacks sensitivity compared to cytotoxicity. False negative EIA tests are not associated with concurrent treatment for C difficile colitis nor with any specific clinical features examined in our study.