Improvements in the silver-staining technique for nucleolar organizer regions (AgNOR)

The silver-staining technique for nucleolar organizer regions (AgNOR) of Ploton et al., as popularized by Crocker, is being widely used for evaluation of nucleolar function, especially in neoplasia. It suffers from limited reliability, background staining, precipitates, and fading of the sections. Factors were identified that affect these problems. The oxidation-reduction level and gelatin used are particularly important. An improved procedure is presented which incorporates pre-reduction of the sections, selection of an optimal gelatin, and post-treatment of the sections to produce a permanent preparation. It is compatible with many fixatives and with other stains used before or after the silver stain.     

Polymer networks based on α,ω-methacrylate-terminated poly(1,3-dioxolane)

α,ω-Methacrylate-terminated poly(1,3-dioxolane)s (polyDXL) were synthesized by cationic ring-opening polymerization of DXL in the presence of methylene-bis(oxyethylmethacrylate) as transfer agent. If the initiator concentration is small compared with the transfer agent concentration, the molecular weights of the polymers are governed by the ratio of the reacted monomer to the reacted transfer agent. The α,ω-methacrylate-terminated polyDXLs obtained undergo free radical polymerization with formation of polyacetal networks. The properties of the networks as function of the molecular weight of the corresponding prepolymers are reported.     

Intercomparison of scanning probe microscopes

Comparison measurements on reference standards are reported in which 13 partners with different instruments took part. A set of prototype standards which had been produced and calibrated within a European project were used for the measurements. Here, results of measurements on a 240 nm step height standard and a two-dimensional lateral standard with a nominal pitch of 1 μm are reported.     

SUL-151 Decreases Airway Neutrophilia as a Prophylactic and Therapeutic Treatment in Mice after Cigarette Smoke Exposure

Chronic obstructive pulmonary disease (COPD) caused by cigarette smoke (CS) is featured by oxidative stress and chronic inflammation. Due to the poor efficacy of standard glucocorticoid therapy, new treatments are required. Here, we investigated whether the novel compound SUL-151 with mitoprotective properties can be used as a prophylactic and therapeutic treatment in a murine CS-induced inflammation model. SUL-151 (4 mg/kg), budesonide (500 μg/kg), or vehicle were administered via oropharyngeal instillation in this prophylactic and therapeutic treatment setting. The number of immune cells was determined in the bronchoalveolar lavage fluid (BALF). Oxidative stress response, mitochondrial adenosine triphosphate (ATP) production, and mitophagy-related proteins were measured in lung homogenates. SUL-151 significantly decreased more than 70% and 50% of CS-induced neutrophils in BALF after prophylactic and therapeutic administration, while budesonide showed no significant reduction in neutrophils. Moreover, SUL-151 prevented the CS-induced decrease in ATP and mitochondrial mtDNA and an increase in putative protein kinase 1 expression in the lung homogenates. The concentration of SUL-151 was significantly correlated with malondialdehyde level and radical scavenging activity in the lungs. SUL-151 inhibited the increased pulmonary inflammation and mitochondrial dysfunction in this CS-induced inflammation model, which implied that SUL-151 might be a promising candidate for COPD treatment.     

Insights into the assessment of myocardial perfusion offered by different cardiac imaging modalities

Myocardial perfusion may be very broadly defined as the tightly regulated nutrient delivery to cardiac tissue. The different components of perfusion are myocardial blood flow, oxygen delivery, myocardial oxygen consumption, and myocardial blood volume. Historically, focus has been placed mostly on the assessment of blood flow. In many instances, knowledge of flow without information about these other aspects is inadequate. This review discusses the various cardiac imaging techniques used for the assessment of myocardial perfusion that represent diverse physiologic measures of "perfusion." Their strengths and limitations are discussed as is their relevance to specific clinicopathologic conditions. Significant work still needs to be performed before all the aspects of myocardial perfusion can be precisely measured in human beings.     

Ultra-dense planar metallic nanowire arrays with extremely large anisotropic optical and magnetic properties

A nanofabrication method for the production of ultra-dense planar metallic nanowire arrays scalable to wafer-size is presented. The method is based on an efficient template deposition process to grow diverse metallic nanowire arrays with extreme regularity in only two steps. First, III–V semiconductor substrates are irradiated by a low-energy ion beam at an elevated temperature, forming a highly ordered nanogroove pattern by a “reverse epitaxy” process due to self-assembly of surface vacancies. Second, diverse metallic nanowire arrays (Au, Fe, Ni, Co, FeAl alloy) are fabricated on these III–V templates by deposition at a glancing incidence angle. This method allows for the fabrication of metallic nanowire arrays with periodicities down to 45 nm scaled up to wafer-size fabrication. As typical noble and magnetic metals, the Au and Fe nanowire arrays produced here exhibited large anisotropic optical and magnetic properties, respectively. The excitation of localized surface plasmon resonances (LSPRs) of the Au nanowire arrays resulted in a high electric field enhancement, which was used to detect phthalocyanine (CoPc) in surface-enhanced Raman scattering (SERS). Furthermore, the Fe nanowire arrays showed a very high in-plane magnetic anisotropy of approximately 412 mT, which may be the largest in-plane magnetic anisotropy field yet reported that is solely induced via shape anisotropy within the plane of a thin film.

Open image in new window

     

圆片级封装的新颖对准技术

对于3D互连、圆片级封装(WLP)和先进的MEMS器件的圆片键合,精密对准是一项关键技术,不同的MEMS,常常包含双面加工处理,而IC和CMOS制造业则只利用单面加工处理步骤,因此,圆片到圆片的对准必须使用设置在键合界面(也就是面对面)中的对准标记。论述了面对面对准方法的主要步骤,最新结果报导,用一种特殊开发的对准系统获得了≤1μm的对准精度。设备主要是为圆片对圆片的对准和键合而设计。     

Charged cellular polymers with "ferroelectretic" behavior

Cellular space-charge electrets have recently emerged as a new class of materials for electromechanical devices, offering chances for a wide range of applications and challenges for materials optimization. However, many fundamental and applied aspects of the physics of these novel materials are not yet explored. Here we summarize our present understanding of the (quasi)-piezo- and -pyroelectricity in such materials. In contrast to the dipole-density piezoelectricity in ferroelectric polymers, the piezoelectric-like response of cellular polymers is intrinsic, with positive d/sub 33/ and negative d/sub 31/ and d/sub 32/ piezoelectric-like coefficients. Similarities with ferroelectric materials are outlined, especially switching of "polarization" and (quasi)-piezoelectricity. First steps towards patterned charging of cellular polymers are reported, an immediate consequence of the possibility for "polarization"-switchingin cellular materials. The results on cellular space-charge electrets suggest that well-known electret devices like microphones may be seen in a new light. Examples include dielectric and electromechanical hysteresis loops obtained with a commercially available electret microphone. In view of the results, cellular polymers may henceforth be called "ferroelectrets" and their material behavior "ferroelectretic". From an applied point of view, the performance of a Fresnel zone plate for focussing ultrasound is shown. Such a device may pave the way for a simple tool in nondestructive materials inspection, and demonstrates the large potential of cellular polymers for applications.