Potential for integration of electrophoretic deposition into electronic device manufacture; demonstrations using silver/palladium

A silver palladium (Ag/Pd) alloy powder is used as an example material to illustrate potential applications of electrophoretic deposition (EPD) in electronics manufacturing, in particular the forming of multilayer devices. The dispersion and deposition of the Ag/Pd powder in acetic acid is characterized. It is found that deposition can be explained by the direct action of electrostatic force on individual particles. Depositions of this Ag/Pd powder are then used to demonstrate: forming of a continuous layer on a rigid substrate; forming of continuous layers in laminated and sintered BaTiO₃ multilayers; and incorporation of patterned depositions into a multilayer by either overcasting the patterned deposition with a particulate slip to form a multicomponent tape, or direct lamination of the patterned deposition to a low temperature co-fired ceramic (LTCC) tape. It is shown that electrically conducting layers can be formed at an average thickness of only two times the diameter of the starting powder. Continuous conductor lines thirty times the average diameter of the starting powder were formed.     

Studies on adsorption equilibrium of xylenes in AEL framework using biased GCMC and energy minimization

The adsorption of xylene isomers in AlPO₄-11 (AEL network) was investigated using biased grand canonical Monte Carlo (GCMC) simulations. Preferential o-xylene adsorption was predicted by the simulations, in agreement with previously reported experimental data. In AlPO₄-11 the selective adsorption behavior comes from the smaller length of the o-xylene molecule along the crystallographic c-axis compared to p-xylene. This is in contrast to AlPO₄-5 and AlPO₄-8, where the ortho-selectivity is caused by the characteristic face-to-face positioning of o-xylene. Energy minimization studies were also performed in a flexible AlPO₄-11 lattice to study the structural changes upon xylene adsorption. The energy minimization study showed that the AlPO₄-11 crystal distorts upon p- and o-xylene adsorption. The distortion mechanism is related to the strong interaction between xylene methyl groups and the sieve oxygen atoms in the O3 position in the wide region of the pore.     

Case Study of an Aerosol Explosion and a Method to Determine Explosion Temperatures

A failure analysis case study is presented for a two-piece aerosol containing tetrafluoroethane, commonly referred to as Refrigerant 134a. A gentleman was preparing to recharge the air conditioning system of an automobile when the bottom exploded off the aerosol container, propelling the body of the aerosol container like a rocket, which hit the man in the eye and blinded him in that eye. The aerosol was never connected to the air conditioner, therefore backpressure from the air conditioner (AC) compressor was ruled out as a cause for the explosion. The objective of the study was to determine why the aerosol exploded. Several recently developed test methods were used, including two types of heat-to-burst tests and a puncture chamber to measure the pressure-versus-temperature behavior of aerosols. More common test methods were also used, such as water bath pressure tests, hydro pressure burst tests, pneumatic pressure burst tests, hardness measurements, weight measurements, metallography, scanning electron microscopy (SEM), energy-dispersive spectroscopy (EDS), and an accident scenario recreation. A semi-empirical correlation between the hardness and weights of the container bottoms was used to determine the explosion temperature and/or pressure. This semi-empirical correlation agrees in principle with an analysis of the explosion pressures using finite-element analysis (FEA). The root cause for the explosion was determined to be a lack of strength of the bottom of the two-piece aerosol coupled with heating the aerosol to temperatures significantly above room temperature.     

Distinctiveness and Correlation in Conceptual Structure: Behavioral and Computational Studies.

Patients with category-specific deficits have motivated a range of hypotheses about the structure of the conceptual system. One class of models claims that apparent category dissociations emerge from the internal structure of concepts rather than fractionation of the system into separate substores. This account claims that distinctive properties of concepts in the living domain are vulnerable because of their weak correlation with other features. Given the assumption that mutual activation among correlated properties produces faster activation in the normal system, the authors predicted a disadvantage for the distinctive features of living things for unimpaired adults. Results of a speeded feature verification study supported this prediction, as did a computational simulation in which networks mapped from orthography to semantics. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Effects of four maintenance programs on the long-term management of obesity.

This study evaluated the effectiveness of four posttreatment programs designed to enhance the long-term maintenance of weight loss. Mildly and moderately obese adults (N?=?123) were randomly assigned to one of the following five conditions: (a) behavior therapy only; (b) behavior therapy plus a posttreatment therapist-contact maintenance program; (c) behavior therapy plus posttreatment therapist contact plus a social influence maintenance program; (d) behavior therapy plus posttreatment therapist contact plus an aerobic exercise maintenance program; or (e) behavior therapy plus posttreatment therapist contact plus both the aerobic exercise and social influence maintenance programs. All posttreatment programs were conducted in 26 biweekly sessions during the year following behavioral treatment for obesity. At an 18-month follow-up evaluation, all four conditions that combined behavior therapy with a posttreatment maintenance program yielded significantly greater long-term weight losses than behavior therapy alone. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Master sintering curve concepts as applied to the sintering of molybdenum

Sintering experiments with various molybdenum powders are rationalized using a master sintering curve concept that collapses density, grain size, or other parameters onto a single curve. In this case, the integral work of sintering is developed and customized for different green densities. Construction of the master sintering curve is described to show how the curve can be normalized with respect to green density effects. Various grades of molybdenum for metal injection molding and die compaction are included in the analysis, processed over a range of heating cycles. Die-compacted samples of varying green densities are used to illustrate the efficacy of the new, normalized master sintering curve concept. Sintering cycle optimization is one possible outcome from this analysis.     

100 mK bolometers for the submillimetre common-user bolometer array (scuba) I. Design and construction

We describe the design and construction of bolometric detectors for SCUBA - the Submillimetre Common-User Bolometer Array for the James Clerk Maxwell Telescope in Hawaii. The instrument contains 131 individual detectors, in two arrays, optimized for the submillimetre atmospheric transmission windows. The detectors are cooled by dilution refrigeration to a temperature of 100 mK, so that the receiver performance will be limited by photon noise from the sky and telescope background in all wavebands. A future paper will describe the performance of the detectors with reference to typical data obtained during the laboratory commissioning period.     

Detection of ultrasonic tones and simulated dolphin echolocation clicks by a teleost fish, the American shad (Alosa sapidissima)

The authors previously reported that American shad (Alosa sapidissima) can detect sounds from 100 Hz to 180 kHz, with two regions of best sensitivity, one from 200 to 800 Hz and the other from 25 to 150 kHz [Mann et al., Nature 389, 341 (1997)]. These results demonstrated ultrasonic hearing by shad, but thresholds at lower frequencies were potentially masked by background noise in the experimental room. In this study, the thresholds of the American shad in a quieter and smaller tank, as well as thresholds for detecting stimulated echolocation sounds of bottlenosed dolphins was determined. Shad had lower thresholds for detection (from 0.2 to 0.8 kHz) in the quieter and smaller tank compared with the previous experiment, with low-frequency background noise but similar thresholds at ultrasonic frequencies. Shad were also able to detect echolocation clicks with a threshold of 171 dB re: 1 microPa peak to peak. If spherical spreading and an absorption coefficient of 0.02 dB/m of dolphin echolocation clicks are assumed, shad should be able to detect echolocating Tursiops truncatus at ranges up to 187 m. The authors propose that ultrasonic hearing evolved in shad in response to selection pressures from echolocating odontocete cetaceans.     

From ethnographic record to system design

This paper explores the issues involved in moving from ethnographic explorations of work in context to a practical contribution to system design. It does so using the example of an interdisciplinary research project involving sociologists and computer scientists in the domain of air traffic control systems. It forms a pair with another paper (Sommerville et al., 1992) exploring these questions from the perspective of our computer science partners. We characterise ethnography as a research method, and consider the differences between undertaking it for strictly sociological or anthropological purposes by contrast with interdisciplinary and design purposes. We summarise some of our results in ethnographic explications of the work of air traffic controllers, and the sociality which it manifests. We describe the dialogues involved in rendering these observations informative for systems design, and the mutual translations implied in attempting to reconcile sociological with software engineering questions about supporting the work. We conclude by specifying some features of cooperative work which an engineering approach is in danger of overlooking; the ways, and limits, in which ethnographers can form a bridge between users and designers; and some of the conflicts of interest entrained in generating technical change.The research is funded by the UK MRC/SERC/ESRC Cognitive Science/HCI Initiative with the title Social Analysis of Control Systems for HCI Design, grant number SPG 8931598. The computer science partners are Professor Ian Sommerville, Dr Tom Rodden, Dr Pete Sawyer and Mr Richard Bentley. Thanks are due to Val King, Kjeldt Schmidt, Ian Sommerville and Tom Rodden for very helpful comments on earlier drafts of this paper.