Complications of chronic otitis media

In summary, recent literature indicates that the complications of chronic otitis media have been decreasing. However, even with the advent of modern and more powerful antimicrobials and aggressive surgical eradication of disease, the morbidity and mortality are still high. Some complications may initially be quite obvious and some complications may be quite subtle. Therefore, the most important tools in making early diagnosis are careful history and physical examination, and a high index of suspicion for impending complications.     

Unique ESD failure mechanisms during negative to Vcc HBM tests

HBM ESD tests on two types of 0.6 μm DRAM devices showed that internal circuit or output driver failures would occur after the input or I/O pins were ESD stressed negative with respect to Vcc at ground. These failures occurred at lower than expected ESD stress voltages due to power-up circuit interactions that either turned-on unique internal parasitic ESD current paths or disrupted the normal operation of the output pin’s ESD protection circuit. ESD analysis found there exists a set of power-up sensitive circuits and if placed near a Vcc bond pad can result in low voltage ESD failures.     

High-reliability GaAs-AlGaAs HBTs by MBE with Be base doping andInGaAs emitter contacts

The authors have developed a modified MBE growth process to produce high-gain n-p-n GaAs-AlGaAs heterojunction bipolar transistors (HBTs) with a mean time to failure (MTTF) of 1.5×10⁸ h at 125°C. Beryllium incorporation and diffusion are controlled through a combination of reduced substrate temperature and increased As/Ga flux ratio during MBE growth, resulting in extremely stable HBT profiles. The authors also demonstrate graded InGaAs surface layers with nonalloyed refractory metal contacts that significantly improve ohmic reliability compared to alloyed AuGe contacts. The ability to produce robust HBTs by MBE is critically important to this technology     

Coupling techniques in boundary-combined methods for solving elliptic problems with singularities

Three coupling strategies in matching the Ritz-Galerkin method and the finite element method are introduced for general elliptic equations, and useful numerical techniques are provided. Numerical experiments have been carried out for solving the typical, singular Motz problem, which shows that optimal convergence rates of numerical solutions can be achieved by using the combined methods and techniques provided in this paper.     

Energy efficiency in cloud computing based on mixture power spectral density prediction

Due to the budget and environmental issues, adaptive energy efficiency receives a lot of attention these days, especially for cloud computing. In the previous research, we developed a combined methodology based on nonparametric prediction and convex optimization to produce proactive energy efficiency-oriented solution. In this work, the predictive analysis was further enhanced by deriving the mixture power spectral density to model the complex cloud monitoring statistics. By engaging the improved technique to the predictive analysis, the prediction process was more adaptive to handle the fluctuation in system utilization. As a consequence, the optimization process could subsequently produce more appropriate setting for energy savings. After the infrastructure setting has been made available, the instruction of virtual machine migration was created and implemented by the cloud orchestrator. This instruction condensed the services into the pool of active facilities, satisfying the objective of power efficiency. Eventually, any physical machine out of the power configuration would be gradually terminated. Compared to our former method, the effectiveness of the proposed technique has been proven by cutting down 4.92% of energy consumption, while still maintaining a similar quality of services.

     

A technique for extracting behavioral sequence patterns from GPS recorded data

The mobile wireless market has been attracting many customers. Technically, the paradigm of anytime-anywhere connectivity raises previously unthinkable challenges, including the management of million of mobile customers, their profiles, the profiles-based selective information dissemination, and server-side computing infrastructure design issues to support such a large pool of users automatically and intelligently. In this paper, we propose a data mining technique for discovering frequent behavioral patterns from a collection of trajectories gathered by Global Positioning System. Although the search space for spatiotemporal knowledge is extremely challenging, imposing spatial and temporal constraints on spatiotemporal sequences makes the computation feasible. Specifically, the mined patterns are incorporated with synthetic constraints, namely spatiotemporal sequence length restriction, minimum and maximum timing gap between events, time window of occurrence of the whole pattern, inclusion or exclusion event constraints, and frequent movement patterns predictive of one ore more classes. The algorithm for mining all frequent constrained patterns is named cAllMOP. Moreover, to control the density of pattern regions a clustering algorithm is exploited. The proposed method is efficient and scalable. Its efficiency is better than that of the previous algorithms AllMOP and GSP with respect to the compactness of discovered knowledge, execution time, and memory requirement.     

Robust Fault Diagnosis for Quadrotor UAVs Using Adaptive Thau Observer

A robust Fault Diagnosis (FD) scheme for a real quadrotor Unmanned Aerial Vehicle (UAV) is proposed in this paper. Firstly, a novel Adaptive Thau observer (ATO) is developed to estimate the quadrotor system states and build a set of offset residuals to indicate actuators’ faults. Based on these residuals, some rules of Fault Diagnosis (FD) are designed to detect and isolate the faults as well as estimate the fault offset parameters. Secondly, a synthetic robust optimization scheme is presented to improve Fault Estimation (FE) accuracies, three key issues include modeling uncertainties, and magnitude order unbalances as well as noises are addressed. Finally, a typical fault of rotors is simulated and injected into one of four rotors of the quadrotor, and experiments for the FD scheme have been carried out. Unlike former research works on the FD schemes for quadrotors, our proposed FD scheme based on the ATO can not only detect and isolate the failed actuators, but also estimate the fault severities. Regardless of roughness of the real flying data, the FD results still have sufficient FE accuracies.     

Structure and properties of polyimide‐bonded magnets processed from prepolymers based on diacetyl derivatives of aromatic diamines and dianhydrides

We report a novel method of polyimide (PI) synthesis from prepolymers based on dianhydrides and diacetyl derivatives of aromatic diamines that facilitate the preparation of a melt processable mixture at 300 ± 10°C of the prepolymer and magnetic Nd‐Fe‐B alloy to provide PI‐bonded magnets with enhanced properties. It is shown that chemical structure of the prepolymers strongly influences viscosity behavior via crystallization of the oligoimide in the melt, leading to formation of PI with rigid‐rod like structure. This structural ordering of the prepolymers based on diacetyl derivative of diamine used in this study, if not controlled, leads to exponential increase of melt viscosity with time, making it practically impossible to prepare melt processable mixture of the magnetic particles and the PI prepolymers at elevated temperatures. The results obtained demonstrate that appropriate dianhydrides and diacetyl derivatives of diamines that do not lead to crystallization of oligoimides in prepolymer mixture can be used under controlled processing conditions to prepare melt‐processable PI‐bonded magnets containing rigid‐rod like PI structure that significantly increases thermal stability of the magnets. The temperature dependencies of the magnetic properties of the PI‐bonded magnets under conditions that they are likely to encounter during their service life were found to be remarkably similar to that of commercial thermoplastic magnets such as injection‐molded nylon magnets. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 478–485, 2006     

Synthesis and Characterization of Segmented Block Copolymers Based on Hydroxyl‐Terminated Liquid Natural Rubber and α,ω‐Diisocyanato Telechelics

Summary: Segmented block copolymers, consisting of non‐polar soft segments from hydroxyl‐terminated liquid natural rubber (HTNR) and polar hard segments from α,ω‐diisocyanato telechelics obtained by “criss‐cross”‐cycloaddition, have been synthesized. The block copolymer formation took place under relatively mild reaction conditions at 80 °C in dichloroethane in the presence of dibutyltin dilaurate as a catalyst. The resulting block copolymers were characterized by spectroscopic techniques (¹H NMR, FTIR, UV‐vis spectroscopy) as well as GPC for molar mass determination. The block copolymers were compression molded in a hot stage press, and the resulting samples were characterized by DSC and stress‐strain measurement. The solubility and phase morphology of the materials have also been studied.

Segmented block copolymer from HTNR and α,ω‐diisocyanato telechelics