Neem oil as a sand fly (Diptera: Psychodidae) repellent

The repellent action of neem oil was evaluated against sand flies under laboratory and field conditions. Concentrations of 2% neem oil mixed in coconut or mustard oil provided 100% protection against Phlebotomus argentipes throughout the night under field conditions; against Phlebotomus papatasi it repelled sand flies for about 7 h in the laboratory. Neem oil is an indigenous product and a low-cost alternative for personal protection against sand fly bites.     

Prognostic evaluation of early indicators in fulminant hepatic failure by multivariate analysis

Results of eight multicenter, randomized, placebo-controlled, double-blind, parallel-group studies were pooled to assess the efficacy of the angiotensin II-receptor blocker irbesartan over the dose range of 1 to 900 mg. A total of 2955 adults with a seated diastolic blood pressure of 95 to 110 mm Hg were randomized to treatment with oral irbesartan once daily or placebo for 6 to 8 weeks. Office blood pressure was measured at trough (24+/-3 hours after the last dose) and peak (3+/-1 hours after the last dose) by mercury sphygmomanometry. Demographic characteristics (mean blood pressure; 151/101 mm Hg; mean age, 54 years; 63% male; and 82% white) were similar across all dose groups. After the groups were pooled, antihypertensive efficacy was assessed by therapeutic response (trough seated diastolic blood pressure <90 mm Hg or a reduction from baseline of > or = 10 mm Hg) and by modeling of the maximum reductions in trough and peak seated diastolic and systolic blood pressure. Antihypertensive effects increased with increasing doses and reached a plateau at > or = 300 mg. Irbesartan 150 mg provided placebo-subtracted reductions in trough seated systolic and diastolic blood pressure of approximately 8 and approximately 5 mm Hg, respectively, with 56% of patients displaying a favorable response. In conclusion, irbesartan provides clinically significant blood pressure lowering, with a clear relationship between (log) dose and antihypertensive effect.     

A novel hybrid deep learning method with cuckoo search algorithm for classification of arrhythmia disease using ECG signals

Neural Computing and Applications - This work presents an efficient hybridized approach for the classification of electrocardiogram (ECG) samples into crucial arrhythmia classes to detect heartbeat...     

K–La–MgO as heterogeneous catalyst for synthesis of 3-(2-hydroxyethyl)-1,3-oxazolidin-2-one from diethanol amine and carbon dioxide

Cost-effective valorization of carbon dioxide into bulk and specialty chemicals using catalysis will be attractive in the foreseeable future. 1,3-Oxazolidin-2-one derivatives are one of the important classes of heterocyclic compounds which have wide applications in pharmaceutical industries due to their biological activities such as antibacterial, antimicrobial, antiseptic. Various synthetic routes are employed to prepare these compounds which include phosgenation, oxidative carbonylation, etc., which make use of polluting chemicals and homogeneous catalysts. The heterogeneous catalytic processes to synthesize these derivatives are quite limited. Thus, developing a green route which is environmental friendly is highly desirable. The current work deals with development of a heterogeneous reusable catalyst and its application to synthesize 1,3-oxazolidin-2-one derivatives using carbon dioxide as a C1 source. The fact that no use of promoter or organic co-catalyst is made in the current process makes the synthesis route more favorable. Pure La–MgO and K–La–MgO with different K loading (1, 3, 5, and 7 wt%) synthesized by combustion route were screened for carbonylation of diethanol amine. 5% K–La–MgO was found to be the best catalyst. The catalyst was well characterized in virgin form and after use by various analytical techniques like TEM, SEM, XRD, CO₂ and NH₃-TPD, BET surface area analysis. With 5% K–La/MgO, 72% conversion of diethanol amine was achieved with 100% selectivity of the desired product at optimum conditions, i.e., 150 °C, 5 wt% K–La/MgO catalyst loading of 0.02 g/cm³ and 2.0 MPa CO₂ pressure. Reaction mechanism was proposed and kinetic model developed. The apparent activation energy was calculated as 18.76 kcal/mol. The catalyst was robust and recyclable. The process is clean and green.     

Experimental characterization of piezoelectrically actuated micromachined silicon valveless micropump

In this paper, performance of piezoelectrically actuated pyramidal valveless micropumps is studied experimentally in detail. Valveless micropumps based on silicon and glass substrate are fabricated using MEMS technology. Two different sizes of micropumps having overall dimensions of 5 mm × 5 mm × 1 mm and 10 mm × 10 mm × 1 mm are fabricated and characterized. In the fabricated micropumps, the thickness of silicon diaphragm is <20 µm which gives the advantage of operating pump at low voltage with excellent stability and consistency. The performance of micropumps in terms of flowrate and backpressure is evaluated for a wide range of driving frequency and actuating voltages. The maximum flowrate of water in the 10-mm micropump is 355 µl/min and backpressure of 3.1 kPa at zero flowrate for an applied voltage of 80 V at frequency 1.05 kHz. The reported micropumps have low footprint, high flowrate and backpressure. Thus, these micropumps are especially suited for biological applications as these can withstand adequate amount of backpressure. Comparative study of the performance of these micropumps with those available in the literature brings out the efficacy of these micropumps.     

Novel Systemic Treatment Modalities Including Immunotherapy and Molecular Targeted Therapy for Recurrent and Metastatic Head and Neck Squamous Cell Carcinoma

Head and neck squamous cell carcinomas (HNSCCs) are the sixth most common cancers worldwide. More than half of patients with HNSCC eventually experience disease recurrence and/or metastasis, which can threaten their long-term survival. HNSCCs located in the oral cavity and larynx are usually associated with tobacco and/or alcohol use, whereas human papillomavirus (HPV) infection, particularly HPV16 infection, is increasingly recognized as a cause of oropharyngeal HNSCC. Despite clinical, histologic, and molecular differences between HPV-positive and HPV-negative HNSCCs, current treatment approaches are the same. For recurrent disease, these strategies include chemotherapy, immunotherapy with PD-1-inhibitors, or a monoclonal antibody, cetuximab, that targets epidermal growth factor; these therapies can be administered either as single agents or in combination. However, these treatment strategies carry a high risk of toxic side effects; therefore, more effective and less toxic treatments are needed. The landscape of HNSCC therapy is changing significantly; numerous clinical trials are underway to test novel therapeutic options like adaptive cellular therapy, antibody-drug conjugates, new targeted therapy agents, novel immunotherapy combinations, and therapeutic vaccines. This review helps in understanding the various developments in HNSCC therapy and sheds light on the path ahead in terms of further research in this field.     

Influence of Al doping in LaCoO3 on structural,electrical and magnetic properties

We report investigations on polycrystalline LaCo_1?x Al _x O₃ (x = 0–0.9) bulk samples. The solid state synthesized samples showed a coexistence of rhombohedral and monoclinic phases in the intermediate concentrations (0.2 ≤ x ≤ 0.5) and pure rhombohedral phase otherwise. The observed effect of Al doping on dc transport has been analysed on the basis of small polaron hopping mechanism. The magnetisation results presented give evidence of weak ferromagnetism and anomalous temperature dependence of coercivity which we associate to the canting of the localised high-spin Co(III) and anti-symmetric exchange interactions at low temperatures.     

Novel organic–inorganic composite material as a cation exchanger from a triterpenoidal system of dammar gum: synthesis,characterization and application

A pioneer study has been conducted to synthesize novel hydrogel starting from a non-cellulosic raw material, gum dammar-a triterpenoidal system, and then converting this hydrogel into an organic–inorganic composite zirconium-based ion exchanger. Gum dammar was cross-linked with polyacrylamide zirconium (IV) iodo-oxalate [Gd-cl-poly(AAm)-Zr (IV) iodo-oxalate] by incorporating inorganic precipitates into the polymeric mixture. The polymeric mixture was synthesized using gum dammar (Gd), acrylamide (AAm), N, N′-methylene-bis-acrylamide (MBA) and potassium persulphate (KPS). The reaction conditions for synthesis of hydrogel and ion exchanger such as time (120 min), temperature (70 °C), solvent (4 mL), concentration of monomer (12.97 × 10^?3 mol/L), initiator (1.48 × 10^?4 mol/L), cross-linker (4.22 × 10^?4 mol/L) and ratio of zirconium oxychloride (0.1 M), potassium iodate (0.1 M) and oxalic acid (0.1 M) in ratio 2:3:2 were optimized to obtain maximum ion exchange capacity (2.02 meq/g). The morphology and structure of hydrogel and ion exchanger were studied using FTIR, SEM, XRD and TGA/DTA/DTG. The SEM study was followed by energy dispersive spectroscopy for elemental analysis. The ion exchanger was quite stable in various acids and bases at low concentration but it completely dissolved in acids and bases at high concentrations. Distribution studies showed that the synthesized ion exchanger had high selectivity for Pb²⁺ ions. Thus, the polymeric-inorganic hybrid material showed integration of both inorganic and organic characteristics within the composite material.     

Experimental investigation on effects of dielectric mediums in near-dry electric discharge machining

Journal of Mechanical Science and Technology - A dielectric fluid plays a significant role on the machining efficiency of Electric discharge machining (EDM). Two phase (liquid-air) dielectric...     

Issues and Requirements for Aluminum Alloys Used in Aircraft Components: State of the Art

Russian Journal of Non-Ferrous Metals - Aluminum alloys have always been the material of choice for the aircraft industry owing to their versatile attributes, such as excellent strength to weight...