The use of epilithic Antarctic lichens (Usnea aurantiacoatra and U. antartica) to determine deposition patterns of heavy metals in the Shetland Islands, Antarctica

Trace-metal contents were recorded for the epilithic antarctic lichens Usnea aurantiacoatra and U. antartica, sampled close to the Argentine scientific station 'Jubany' on '25 de Mayo' (King George) Island, in the Southern Shetland Archipelago (Antarctica). The corresponding heavy-metal levels have been measured through atomic absorption spectrophotometry, following internationally accepted analytical methods. The results obtained support the hypothesis that an atmospheric circulation of trace metals exists on the assessed area, and the activities developed at the different scientific stations located on this island would be a potential source of heavy metals to the evaluated environment. The geographical distribution of trace metals atmospherically transported in the area close to 'Jubany Station' was studied through the corresponding metal contents of the assessed lichens. Finally, the suitability of both analyzed lichen species, Usnea aurantiacoatra and U. antartica, as biological indicators for quantitative monitoring of airborne metals for this antarctic environment was recognized.     

Alder ene functionalization of polyisobutene oligomer and styrene-butadiene-styrene triblock copolymer

The Alder ene functionalization reaction of double bonds containing macromolecules such as polyisobutene oligomer (PIB) and a styrene-butadiene-styrene triblock copolymer (SBS) samples with maleic anhydride (MAH) or diethyl maleate (DEM) as enophiles is described. The analysis of the products by means of different techniques assesses the addition of the polar molecules to the reactive vinylidene units of the polymer with functional degrees (FD) depending on the type of enophile and polymer reactivity. The role of the reaction conditions and the use as Lewis acids as catalysts are discussed in terms of their influence on the addition reaction extent and on the polymer molecular weight.     

A computational approach to characterize formation of a passivation layer in lithium metal anodes

Li metal anode is the “Holy Grail” material of advanced Lithium-ion-batteries (LIBs). However, it is plagued by uncontrollable dendrite growth resulting in poor cycling efficiency and short-circuiting of batteries. This has spurred a plethora of research to understand the underlying mechanism of dendrite formation. While experimental studies suggest that there are complex physical and chemical interactions between heterogeneous solid-electrolyte interphase (SEI) and dendrite growth, most of the studies do not reveal the mechanisms triggering these interactions. To deal with this knowledge gap, we propose a multiscale modeling framework which couples kinetic Monte Carlo and Molecular Dynamics simulations. Specifically, the model has been developed to account for (a) heterogeneous SEI, (b) dendrite-SEI interactions, and (c) effect of electrolyte on Li electrodeposition and potential dendrite formation. This allows the proposed computational model to be extended to various electrolytes and SEI species and generate results consistent with previous experimental studies.     

Store-and-Forward Multicast Routing on the Mesh

We study the complexity of routing a set of messages with multiple destinations (multicast routing) on an n-node square mesh under the store-and-forward model. A standard argument proves that time is required to route n messages, where each message is generated by a distinct node and at most c messages are to be delivered to any individual node. The obvious approach of simply replicating each message into the appropriate number of unicast (single-destination) messages and routing these independently does not yield an optimal algorithm. We provide both randomized and deterministic algorithms for multicast routing, which use constant-size buffers at each node. The randomized algorithm attains optimal performance, while the deterministic algorithm is slower by a factor of O( log ² n). We also describe an optimal deterministic algorithm that, however, requires large buffers of size O(c). A preliminary version of this paper appeared in Proceedings of the 13th Annual ACM Symposium on Parallel Algorithms and Architectures, Crete, Greece, 2001. This work was supported, in part, by MIUR under project ALGO-NEXT.     

Evaluation of Epigenetic and Radiomodifying Effects during Radiotherapy Treatments in Zebrafish

Radiotherapy is still a long way from personalizing cancer treatment plans, and its effectiveness depends on the radiosensitivity of tumor cells. Indeed, therapies that are efficient and successful for some patients may be relatively ineffective for others. Based on this, radiobiological research is focusing on the ability of some reagents to make cancer cells more responsive to ionizing radiation, as well as to protect the surrounding healthy tissues from possible side effects. In this scenario, zebrafish emerged as an effective model system to test for radiation modifiers that can potentially be used for radiotherapeutic purposes in humans. The adoption of this experimental organism is fully justified and supported by the high similarity between fish and humans in both their genome sequences and the effects provoked in them by ionizing radiation. This review aims to provide the literature state of the art of zebrafish in vivo model for radiobiological studies, particularly focusing on the epigenetic and radiomodifying effects produced during fish embryos’ and larvae’s exposure to radiotherapy treatments.     

Structural changes,chemical composition and antioxidant activity of cherry tomato fruits (cv. Micro‐Tom) stored under optimal and chilling conditions

BACKGROUND: Cherry tomato fruits cv. Micro‐Tom, a model plant for tomato genetics, were analysed in order to determine the main structural and chemical changes under optimal and chilling storage conditions. The comparison of Micro‐Tom to standard tomato cultivars will give an insight into suitability of this dwarf cultivar as a model for studying the influence of low‐temperature conditions on tomato fruits. RESULTS: During chilling, fruit tissue was progressively destroyed due to the collapse of the deep layers of the pericarp. Chilling lowered the typical tomato kinetics of ripening in sugars (glucose, fructose, sucrose), organic acids (tartaric, malic, citric, ascorbic and succinic) and the antioxidants phenol and lycopene, while carotenoid synthesis seemed to be blocked. Glutathione level was elevated and the activity of ROS scavenging enzymes was altered. Essentially, Micro‐Tom fruits showed a quality evolution that was similar to that described for standard tomato cultivars. CONCLUSION: The cherry tomato cultivar Micro‐Tom could be used as a model for studying the influence of low temperature on biochemical and structural changes taking place during chilling injury conditions. Copyright © 2009 Society of Chemical Industry     

Charge transfer in thin films of donor–acceptor complexes studied by infrared spectroscopy

The degree of charge transfer in thin films of organic charge transfer (CT)-complexes, which are deposited via thermal evaporation, is examined via infrared-spectroscopy. We demonstrate a linear relationship between the shift in the excitation energy of the CN-stretching mode of CT-complexes with the acceptor 7,7,8,8-tetracyanoquinodimethane (TCNQ) and the charge transfer. The measured correlation corresponds very well with DFT calculations. For Na-TCNQ we observe a splitting in the peak of the CN-stretching mode, which can be explained by the coupling of two modes and was confirmed by the calculations. In CT-complexes with partial charge transfer the appearance of an electronic excitation is demonstrated.     

On the association between poly(vinyl alcohol) and sodium dodecyl sulfate and its effect on liquid–liquid interfacial tension: A mathematical model

Association between poly(vinyl alcohol-co-vinyl acetate) copolymer (PVA) and sodium dodecyl sulfate (SDS) was studied experimentally and theoretically. It was found that, for the ethyl acetate-aqueous phase interface in which PVA was previously adsorbed, the interfacial tension (γ) increases abruptly to a maximum and then exhibits a relatively mild decay with the addition of SDS to the aqueous phase. The theoretical results indicate that vinyl acetate (VAc) segments determine γ. However, for relatively low concentrations of SDS (C_SDS), this latter plays a major role because through its association with the VAc segments it modulates the extent to which PVA is adsorbed at the interface, indirectly determining the value of γ. As C_SDS approaches to the CMC value for SDS, its influence on γ decreases because SDS tends to self-assembly rather than associates with VAc. These model predictions are consistent with experimental findings reported in the literature.     

Determination of tylosin in milk samples by poly(ethylene terephthalate)-based molecularly imprinted polymer

Poly(ethylene terephthalate)-based molecularly imprinted polymers (MIPs) were synthesized, and their recognition capability was evaluated. Adsorption isotherm was described by the Langmuir model and the maximum adsorption capacity of MIP_Ty reached 172.4 mg g⁻¹ in water at pH 6.2. A recognition coefficient of 1.17 was obtained. A solid-phase extraction cartridge was manufactured and its behavior was evaluated for tylosin extraction from aqueous and milk samples. An off-line SPE-UV method was applied. An acceptable linearity was obtained in the range of 1–20 μg ml⁻¹ and the average recovery at three spike levels in milk samples was higher than 92%. The limit of quantification was 2.6 × 10⁻² μg ml⁻¹. The manufactured SPE cartridge has a great potential for clean-up processes in complex media. The cartridge offers a fast and sensitive option to the existing sorbents for extracting this drug from milk samples.     

Anti‐Oxygen Leaking LiCoO2

LiCoO₂ is a prime example of widely used cathodes that suffer from the structural/thermal instability issues that lead to the release of their lattice oxygen under nonequilibrium conditions and safety concerns in Li‐ion batteries. Here, it is shown that an atomically thin layer of reduced graphene oxide can suppress oxygen release from Li_xCoO₂ particles and improve their structural stability. Electrochemical cycling, differential electrochemical mass spectroscopy, differential scanning calorimetry, and in situ heating transmission electron microscopy are performed to characterize the effectiveness of the graphene‐coating on the abusive tolerance of Li_xCoO₂. Electrochemical cycling mass spectroscopy results suggest that oxygen release is hindered at high cutoff voltage cycling when the cathode is coated with reduced graphene oxide. Thermal analysis, in situ heating transmission electron microscopy, and electron energy loss spectroscopy results show that the reduction of Co species from the graphene‐coated samples is delayed when compared with bare cathodes. Finally, density functional theory and ab initio molecular dynamics calculations show that the rGO layers could suppress O₂ formation more effectively due to the strong C? O_cathode bond formation at the interface of rGO/LCO where low coordination oxygens exist. This investigation uncovers a reliable approach for hindering the oxygen release reaction and improving the thermal stability of battery cathodes.