The Physical Context of Creativity

Creative processes are complex and consist of sub‐processes, e.g. value creation, scaffolding, imagination and materialization. Creativity takes place in a physical context, i.e. in a confined space. Such space restricts and enables the free flow of sensory experiences and proximity of other people. The confinements may make certain sensory experiences available, e.g. vision of source material, sight and sound (including noise). This framing allows certain cognitive processes and restricts others. This may induce emotions that, in turn, facilitate or reduce the enhancement of creativity. Physical space affects the well‐being of people, the channels of information, the availability of knowledge tools and sets the stage for coherence and continuity, which may contribute to competitive advantages.     

Prolonged release Matrix Pellets Prepared by Melt Pelletization I. Process Variables

A melt pelletization process was investigated in an 8 litre laboratory scale high shear mixer using a formulation with paracetamol, glyceryl monostearate 40-50, and microcrystalline wax. The effects of jacket temperature, product temperature during massing, product load, massing time and impeller speed were investigated by means of factorially designed experiments. The maximum yield of pellets in the range of 500-1400μm was found to approx. 90%. For process conditions preventing deposition of moist mass, the process was found to be reproducible. Impeller speed and massing time were found to be important process variables. Remarkably low in vitro drug release rates were observed in USP-dissolution tests.     

The effect of reaction conditions on montmorillonite-catalysed peptide formation

Oligomerization of glycine (gly) and diglycine (gly₂) on montmorillonite was performed as cyclic, drying-wetting process at temperatures below 100°C, under varying reaction conditions. The influence of substrate/clay ratio, temperature and pH was found to be different for amino acid (AA) dimerization, cyclic anhydride (CA) formation and peptide chain elongation. High temperatures and neutral pH favour CA formation over diglycine production. An AA/catalyst ratio of 0.2 mmol/g leads to optimal yields. This supports the assumption that amino acid dimerization and CA formation take place at the edges of clay particles. Peptide chain elongation, starting from gly₂, produces higher yields at higher temperatures and neutral pH.     

Ring hydrogenation of naphthalene and 1-naphthol over supported metal catalysts in supercritical carbon dioxide solvent

Catalytic ring hydrogenations of naphthalene and 1-naphthol were studied over several supported metal catalysts in supercritical carbon dioxide solvent at low temperature. Higher concentration of hydrogen in supercritical carbon dioxide and lower reaction temperature were responsible for higher catalyst activity and selectivities to the desired partial ring hydrogenated products as compared with those observed in organic solvent for the same catalyst.     

Mechanical properties of moist agglomerates in relation to granulation mechanisms part I. Deformability of moist,densified agglomerates

The mechanical properties of moist samples of fine, polydisperse powders are investigated by measuring the tensile strength by a diametrical compression test and the stress—strain relationship of samples exposed to uniaxial compression. The strengths determined by the two methods correlate well. The strength of moist samples compressed to porosities comparable to the level of intragranular porosities achieved by granulation in high-speed mixers is shown to be influenced significantly by particle interactions in addition to mobile liquid bondings. For a particular material the strength is controlled mainly by porosity and liquid saturation. It is shown that the effect of a growing liquid saturation is to reduce particle interactions and thus to facilitate densification during granulation. The deformability of moist samples, which is dependent on strength and deformation behaviour, is assessed for lactose and dicalcium phosphate.     

Matrix‐assisted laser desorption/ionization mass spectrometry of synthetic polymers. VI. Analysis of phenol–urea–formaldehyde cocondensates

Phenolic resoles can be regarded as copolymers of phenol and formaldehyde that are distributed in the chain length and the number of methylol groups per molecule. While other spectroscopic methods like FTIR and NMR only give average structures, MALDI–TOF mass spectrometry is able to resolve the oligomer distribution of phenolic resoles. Using 2,5‐dihydroxybenzoic acid or 2,4,6‐trihydroxyacetophenone as matrices, MALDI–TOF spectra are obtained where each oligomer peak can be assigned to a particular chemical structure. Thus, the degree of polymerization and the number of reactive methylol groups can be determined. For urea‐modified resoles, in addition to phenol–formaldehyde and urea–formaldehyde structures, for the first time, phenol–urea–formaldehyde cocondensate structures can be identified directly. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 2540–2548, 2003     

What you get is what you see: revisiting the evaluator effect in usability tests

Usability evaluation is essential to user-centred design; yet, evaluators who analyse the same usability test sessions have been found to identify substantially different sets of usability problems. We revisit this evaluator effect by having 19 experienced usability professionals analyse video-recorded test sessions with five users. Nine participants analysed moderated sessions; 10 participants analysed unmoderated sessions. For the moderated sessions, participants reported an average of 33% of the problems reported by all nine of these participants and 50% of the subset of problems reported as critical or serious by at least one participant. For the unmoderated sessions, the percentages were 32% and 40%. Thus, the evaluator effect was similar for moderated and unmoderated sessions, and it was substantial for the full set of problems and still present for the most severe problems. In addition, participants disagreed in their severity ratings. As much as 24% (moderated) and 30% (unmoderated) of the problems reported by multiple participants were rated as critical by one participant and minor by another. The majority of the participants perceived an evaluator effect when merging their individual findings into group evaluations. We discuss reasons for the evaluator effect and recommend ways of managing it.     

Structure of resorcinol,phenol, and furan resins by MALDI‐TOF mass spectrometry and 13C NMR

The structure of traditional, linear phenol–resorcinol–formaldehyde (PRF) resins, urea‐branched PRF resins, and phenol–resorcinol–furfural (PRFuran) resins has been investigated in depth by both matrix‐assisted laser desorption/ionization time of flight (MALDI‐TOF) mass spectroscopy and ¹³C NMR. The structure of a variety of oligomers has been obtained, and the structures present in each of the three types of resins related to the very different percentages of resorcinol needed for their equal performance as adhesives. The oligomers type and species distribution appeared very different for each case. PRF resins performance is improved by maximizing either the proportion of resorcinol‐containing oligomers or methylol‐groups containing oligomers, even without any resorcinol, or both. It is equally obtained by the minimization of the relative proportion of the low reactivity Phenol (CH₂ Phenol) species in which resorcinol is not present, this being the most important parameter. This can be obtained by more effective use of the resorcinol by just modifying the resin manufacturing procedure. This parameter instead does not appear to be determinant in PRFuran resins. In these, it is the higher molecular weight of furfural in relation to formaldehyde that engenders for the same manufacturing procedure a correspondingly lower proportion of resorcinol in the resin. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 2665–2674, 2004