The tissue response in rats to implants made of machined and cast titanium was evaluated after 1 and 12 weeks. The implants consisted of a circular plate portion, located in the abdominal wall, and a cylindrical rod portion protruding into the peritoneal cavity. The chemical and topographical surface properties of the two types of implants differed considerably. The implants with surrounding tissue were processed en bloc for light and electron microscopy. The bulk metal was removed by an electrochemical procedure which permitted the sectioning and evaluation of the intact implant-tissue interface. The general distribution of macrophages and fibroblasts was the same around the plate portion of both types of implants. Macrophages constituted the predominating cell type with the highest concentration in the innermost cell zone closest to the implant. The number of macrophages per section area was significantly higher around machined implants. Multinuclear giant cells, always located at the implant surface, were more frequent around cast implants. The majority of the intraperitoneal rod portions were partially (1 week) or completely (12 weeks) covered by tissue; partial or complete overgrowth of tissue was rare for machined rod portions. Imaging electron energy loss spectroscopy demonstrated the presence of titanium in macrophages in the peripheral part of the tissue capsule around cast, but not machined implants. We conclude that the tissue responses to the two types of titanium implants differed considerably in the two biological environments (soft tissue in abdominal wall; peritoneal cavity) examined and that the response in one environment does not predict the response in the other. We also believe that improvements have to be made in the casting procedure in order to reduce surface roughness and contamination before cast implants can be used in clinical applications. 相似文献
Lifeline systems are vulnerable to two types of hazards arising from potential earthquake sources. These are the hazard of a fault-rupture strike on elements of a lifeline system and the hazard of overstress induced in different elements of the system because of the ground vibration. An optimum design method is presented in this paper for the design of a lifeline system for a maximum accepted probability of failure because of any of the two modes of failure. The method may be used to determine an optimum path between a number of fixed points which represent supply or demand stations in the system. 相似文献
Catalysis Letters - Several highly efficient and magnetically recyclable cobalt catalytic systems were prepared using magnetic chitosan and some safe and available organic compounds... 相似文献
Silicon - In this paper, a new structure: triple work function metal gate SOI MESFET, intended for integration into the deep-submicron CMOS technology, is proposed. The gate of the device consists... 相似文献
Quantum-dot cellular automata (QCA) technique is one of the emerging and promising nanotechnologies. It has considerable advantages versus CMOS technology in various aspects such as extremely low power dissipation, high operating frequency and small size. In this paper, designing of a one-bit full adder is investigated using a QCA implementation of Toffoli and Fredkin gates. Then, a full adder design with reversible QCA1 gates is proposed regarding to overhead and power savings. Our proposed full adder design is more preferable when considering both circuit area and speed. The proposed design uses only two QCA1 gates and maximizes the circuit density and focuses on a layout of the circuit which is minimal in using QCA cells. 相似文献
The effects of gum tragacanth obtained from two species of Astragalus Gossypinus (GT-G) and A. Parrowianus (GT-P) at two levels of 10% and 30% combined with cellulose nanofibers (CNF; 5%) on the physico-mechanical and structural properties of polyvinyl alcohol (PVA) nanocomposite film were investigated in this study. The water solubility and water vapor permeability of the films decreased with increasing the content of both gums, especially in the film containing 30% GT-P. The highest values of the tensile strength (39.3 MPa) and elongation at break (445%) belonged to the treatment containing 10% GT-P (90/10P/0). The FTIR and DSC analyses confirmed good interactions between GT and PVA in the 90/10P/0 treatment. SEM images indicated the dense structure of this film as the optimum treatment. Although the presence of CNF in the films containing GT-G improved some properties, especially the Young modulus, it impaired all the functional properties of nanocomposite GT-P film. 相似文献
An original inversion method specifically adapted to the estimation of Poisson coefficient of balls by using their resonance spectra is described. From the study of their elastic vibrations, it is possible to accurately characterize the balls. The proposed methodology can create both spheroidal modes in the balls and detect such vibrations over a large frequency range. Experimentally, by using both an ultrasonic probe for the emission (piezoelectric transducer) and a heterodyne optic probe for the reception (interferometer), it was possible to take spectroscopic measurements of spheroidal vibrations over a large frequency range (100 kHz-45 MHz) in a continuous regime. This method, which uses ratios between wave resonance frequencies, allows the Poisson coefficient to be determined independently of Young's modulus and the ball's radius and density. This has the advantage of providing highly accurate estimations of Poisson coefficient (+/-4.3 x 10(-4)) over a wide frequency range. 相似文献
The Peer to Peer-Cloud (P2P-Cloud) is a suitable alternative to distributed cloud-based or peer-to-peer (P2P)-based content on a large scale. The P2P-Cloud is used in many applications such as IPTV, Video-On-Demand, and so on. In the P2P-Cloud network, overload is a common problem during overcrowds. If a node receives many requests simultaneously, the node may not be able to respond quickly to user requests, and this access latency in P2P-Cloud networks is a major problem for their users. The replication method in P2P-Cloud environments reduces the time to access and uses network bandwidth by making multiple data copies in diverse locations. The replication improves access to the information and increases the reliability of the system. The data replication's main problem is identifying the best possible placement of replica data nodes based on user requests for data access time and an NP-hard optimization problem. This paper proposes a new replica replacement to improve average access time and replica cost using fuzzy logic and Ant Colony Optimization algorithm. Ants can find the shortest path to discover the optimal node to place the duplicate file with the least access time latency. The fuzzy module evaluates the historical information of each node to analyze the pheromone value per iteration. The fuzzy membership function is also used to determine each node's degree based on the four characteristics. The simulation results showed that the access time and replica cost are improved compared to other replica replacement algorithms.
Incremental sheet metal forming in general and Single Point Incremental Forming (SPIF) specifically have gone through a period of intensive development with growing attention from research institutes worldwide. The result of these efforts is significant progress in the understanding of the underlying forming mechanisms and opportunities as well as limitations associated with this category of flexible forming processes. Furthermore, creative process design efforts have enhanced the process capabilities and process planning methods. Also, simulation capabilities have evolved substantially. This review paper aims to provide an overview of the body of knowledge with respect to Single Point Incremental Forming. Without claiming to be exhaustive, each section aims for an up-to-date state-of-the-art review with corresponding conclusions on scientific progress and outlook on expected further developments. 相似文献
Multi-level (ML) quantum logic can potentially reduce the number of inputs/outputs or quantum cells in a quantum circuit which
is a limitation in current quantum technology. In this paper we propose theorems about ML-quantum and reversible logic circuits.
New efficient implementations for some basic controlled ML-quantum logic gates, such as three-qudit controlled NOT, Cycle,
and Self Shift gates are proposed. We also propose lemmas about r-level quantum arrays and the number of required gates for an arbitrary n-qudit ML gate. An equivalent definition of quantum cost (QC) of binary quantum gates for ML-quantum gates is introduced and
QC of controlled quantum gates is calculated. 相似文献