An architectural counterpoint in Universal Everything: Fluid Bodies exhibition

ABSTRACT

This exhibition review focuses on the quest for weaving boundaries between body-form-space-and material relationship using immersive technologies. Emerging as an architectural counterpoint, Universal Everything: Fluid Bodies exhibition held in Borusan Contemporary focuses on how we perceive the motion and form in relation to it, as well as fusing senses of kinaesthetic and synaesthetic through a data driven and motion-based visual representation. Through these algorithms, the exhibition displays how neuroarchitecture reminds us of the senses of perception. The architectural counterpoint, intention as an interaction and encounter of the body with ‘the machine’ as the ‘voyeur body’ and how this observational dialogue becomes a research methodology in understanding the nature of movement in space through digital tools.     

Effects of ethanol,formaldehyde, and gentle heat fixation in confocal resonance Raman microscopy of purple nonsulfur bacteria

Resonance Raman microscopy is well suited to examine living bacterial samples without further preparation. Therefore, comparatively little thought has been given to its compatibility with common fixation methods. However, fixation of cell samples is a very important tool in the microbiological sciences, allowing the preservation of samples in a specific condition for further examination, future measurements, transport, or later reference. We examined the effects of three common fixatives—ethanol, formaldehyde solution, and gentle heat—on the resonant Raman spectrum of three generic bacteria species, Rhodobacter sphaeroides DSM 158^T, Rhodopseudomonas palustris DSM 123^T, and Rhodospirillum rubrum DSM 467^T, holding carotenoid‐ and heme‐chromophores in confocal Raman microscopy. In addition, we analyzed the effect of poly‐L ‐lysine coating of microscope slides, widely used for mounting biological and medical samples, on subsequent confocal Raman measurements of native and fixed samples. The results indicate that ethanol is preferable to formaldehyde as fixative if applied for less than 24 h, whereas heat fixation has a strong, detrimental effect on the resonant Raman spectrum of bacteria. Formaldehyde fixation excels at fixation times above 24 h, but causes an overall reduction in signal intensity. Poly‐L ‐lysine coating has no discernable effect on the Raman spectra of samples fixed with ethanol or heat, but it further decreases the signal intensity, especially at higher wavenumbers, in the spectra of samples fixed with formaldehyde. Microsc. Res. Tech. 74:177–183, 2011. © 2010 Wiley‐Liss, Inc.     

Fracture load and microcrack comparison of crowns manufactured from tooth‐shaped and traditional blocks

This study intended to analyze microcracks and fractographic markings on the surface of all ceramic crowns after milling and compare the fracture loads. 90 crowns were manufactured from two feldspathic (Priticrown‐Pr and Vita Mark II‐Vi) and a lithium disilicate (EmaxCAD‐Em) blocks (n = 30). Two groups (n = 15) were prepared for each ceramic. In the first group, crowns were analyzed twice via the fluorescent penetrant method for microcrack detection, after the manufacturing process and thermal cycles. The load to fracture test was applied at a crosshead speed of 0.5 mm/min until catastrophic failure. Second group crowns were directly cemented onto the Co‐Cr dies following the manufacturing process and loaded to fracture. Fractographic markings were analyzed through scanning electron microscope. Spearman correlation analysis, Kruskal–Wallis H test, Mann–Whitney U test, and Wilcoxon Signed Rank test were applied (α = .05). Fracture loads of Em crowns were higher than other groups (p < .05), with and without the aging procedure. Except for second group Pr (r = ?.532), no significant relationship was found between microcrack numbers and fracture loads (p > .05). Thermal cycling did not affect microcrack numbers and fracture loads (p > .05). Tooth‐shaped multilayered Pr blocks did not provide an advantage in terms of microcrack and fracture loads.     

Solvent modification effect on the physical and chemical extraction of acetic acid

Combined use of inert diluents with polar modifiers enables former to be utilized for the recovery of polar value-added chemicals. The results show that polarities of both solvent and modifier are critical for efficient separations. Thus, K_D values with 1-octanol were higher than those with 1-decanol; however, those with xylene were superior to those with hexane and toluene. Increasing the amine concentrations increased the K_D values, in contrast to the trends with pH and temperature. About 33%, 79% and 67% of acetic acid was recovered using 25% (v/v) Alamine 336 in xylene, 1-octanol and 30% 1-octanol-modified xylene, respectively. Therefore, solvent modification positively affects the extraction power of inert diluents for acetic acid recovery.     

Comparison of the effects of different retention appliances on the oxidant–antioxidant system

The aim was to compare oxidative stress (OS) levels with different types of retention appliance. Thirty orthodontic patients were divided into three groups: Group 1 (Essix retainer), Group 2 (lingual retainer with stainless steel retainer wire), and Group 3 (lingual retainer with fiber-reinforced material). OS was assessed in the subjects’ saliva. Saliva samples were taken from the patients at T₀ (before using the retention appliance), T₁ (first month of retention), and T₂ (third month of retention). The specimens were investigated to detect changes in total antioxidant status (TAS), total oxidant status (TOS), and oxidative stress index (OSI). TAS values in Group 2 were significantly higher than in Group 3. TOS values in Group 3 were significantly lower than in the other groups. TOS values in Group 2 were lower than in Group 1. OSI values of Group 1 were higher than those in Group 2 or 3. There was no statistically significant difference among the time periods. The type of retention appliance affected OS values. A fiber-reinforced material may have a lower OSI. OS or products can affect some systemic disease; therefore, the selection of the retainer will be important on these patients.     

Efficient manganese decorated cobalt based catalysts for hydrogenation of 5-hydroxymethylfurfural (HMF) to 2,5-dimethylfuran (DMF) biofuel

2,5-dimethylfuran (DMF) is a promising compound in the production of biofuel with high-quality properties. In this study, it is aimed to develop new efficient catalysts to synthesize DMF from 5-hydroxymethylfurfural (HMF). Co, Mn/Co, and Ru/Co catalysts were prepared using the NaBH₄ reduction method. The catalysts were subjected to activity tests for the hydrogenation of HMF to DMF by changing the reaction parameters, such as temperature and time. Mn/Co catalysts prepared from metal precursors at various molar ratios of Mn/Co were found to be effective in hydrogenation reactions of HMF to DMF. A 91.8% DMF yield was achieved in the presence of a Mn/Co (50/50) catalyst without noble metal at 180°C for 4 hours. The Brunauer-Emmet-Teller (BET) method, x-ray diffraction (XRD), x-ray photoelectron spectroscopy (XPS), and induction coupled plasma mass spectroscopy (ICP-MS) techniques were used to characterize the efficient Mn/Co catalyst.     

A Novel Approach for Bolted T-Stub Connections

This paper reports an investigation into new connection types and their behaviors determined using full-scale experiments. T-shaped connections were created using the IPE standard profile. The aim of this study was to analyze the influence of T connections based on the IPE standard profile, height of beam to height of T-stub joint (H) of T-stub joints, and lengths (X) of T-stub joints on the behavior of steel connections, in order to provide the necessary data for improving Eurocode 3 and enable efficient use of residue IPE standard profiles and back to the consumption cycle. While the moment resistance values increased with an increase in H from H_min to H_max in model groups with X of 126 mm, and the energy dissipation increased with an increase in H from H_min to H_max and also with an increase in the lengths (X) of T-stub joints from 54 to 126 mm.     

A haar wavelet approximation for two-dimensional time fractional reaction–subdiffusion equation

Engineering with Computers - In this study, we established a wavelet method, based on Haar wavelets and finite difference scheme for two-dimensional time fractional reaction–subdiffusion...