掌握油气生产发展规律 提高自动化应用水平

油气生产的自动化过程控制是转变生产方式,发展油气生产依靠的主要科学技术之一.结合油气生产发展的特征,全面总结了中国石油近几年自动化技术应用取得的成绩,针对不同的生产特征,确定了自动化控制系统的不同功能和构成特点,提出了自动化系统应用中存在的问题和发展方向.     

ADIC iPlatform智能磁带库体系结构

本文介绍了ADIC iPlatform智能磁带库体系结构。     

WC/Cu复合材料制备及其高温性能

用机械合金化法结合冷变形，制备了WC／Cu复合材料，研究了冷变形后复合材料的组织特征和高温退火时韵性能变化。结果表明：烧结后的材料经冷变形，组织呈显著纤维状，WC颗粒弥散分布，密度明显提高，达到理论密度的99．2％；复合材料经600～900℃高温退火，强度和硬度略有下降，塑性则有大幅提高；900℃退火时未发生明显的再结晶，界面结合良好；所制备的WC／Cu复合材料有优良的综合性能。     

论建立动态勘探目标评价体系的迫切必要性

从国际上通行的油气勘探评价工作重点,中国石油所面临的"已逐步进入一个不断在老区范围内开展精细勘探、在老区范围内开展新区块、新层系勘探以获得主要的储量增长"的新的勘探形势,现有地质研究中各专题研究与具体勘探目标评价脱节等多个方面,论述了在中国石油内部建立一套动态勘探目标评价体系的迫切必要性;并在此基础上阐述了一个完整的动态勘探目标评价体系应包括的主要内容;最后对该体系的建设进行了可行性分析。     

岩石物理横波速度曲线计算技术

横波速度是地震勘探中的重要参数。针对实际生产中缺乏横波速度测井曲线资料，利用经验公式计算精确度不高的问题，通过对横波速度计算理论模型的研究分析，选择Blot-Gassman模型法，利用岩石矿物成分、流体成分、孔隙度及密度等测井曲线进行横波速度测井曲线的计算，并对横波速度计算技术和流程进行研究。在实际工区进行了横波速度曲线计算，计算结果与实测横波吻合程度较高，误差小于10％，该技术在储层和流体识别预测的应用中取得了较好效果。     

Optical bistability in reflective fiber gratings

Optical bistability in a nonlinearly reflective fiber grating through the mode coupling between the LP₀₁ and counter propagation LP₀₂ modes (i,e., the reflective LP₀₁&rlhar2;LP₀₂ mode converter) is investigated by using the coupled-mode theory. Both the transmissive and the reflective properties of this nonlinear device are analyzed, which show that the output-versus-input relation exhibits the optical bistability. The switching power and the bistable hysteresis performances are also discussed. In addition, the comparison between the nonlinearly reflective mode converter (LP₀₁&rlhar2;LP₀₂) and the nonlinear fiber Bragg grating reflector (i,e., the LP₀₁ and counter-propagation LP₀₁ modes) is also presented. It is shown that the former has much lower switching power than the latter     

Component-relevancy and characterization results in multistatesystems

Two new versions of component relevancy for multistate structure functions are introduced. They are compared with some existing component-relevance conditions and their general properties are investigated. Based on the two relevance conditions, two component-importance measures for multistate systems are defined; they are most appropriate for comparing components when a certain type of system improvement is considered. Series and parallel structures are characterized within the L-superadditive and L-subadditive structure functions by imposing the two new relevance conditions     

水力喷射径向水平井生产管的工艺评定与检验

在URRS系统施工过程中 ,生产管处于多种变化复杂的应力和变形状态下 ,若出现失稳、渗漏、刺穿和断裂等事故 ,将造成巨大经济损失。为此 ,开展了水力喷射径向水平井用生产管的焊接方法、焊接设备、焊接工艺过程和焊接接头力学性能评定方法的试验研究。通过研究和试验 ,管材基本上实现了国产化 ,与之相匹配的焊接材料、焊接工艺以及质量检测技术已基本配套和规范化 ,形成了一套稳定的、可靠性较高且能完全满足现场工况的施工体系和质量保证体系     

Theory and design of a tapered line distributed photodetector

We present the theory and design of a tapered line distributed photodetector (TLDP). In the previously demonstrated velocity-matched distributed photodetector (VMDP), high electrical bandwidth is achieved by proper termination in the input end to absorb reverse traveling waves, sacrificing one-half of the quantum efficiency. By utilizing the tapered line structure and phase matching between optical waves and microwaves in our analyzed structure, a traveling-wave photodetector is more realizable and ultrahigh bandwidth can be attained due to removal of the extra input dummy load that sacrifices one-half of the total quantum efficiency. To investigate the advantages of TLDP over VMDP, we calculate their electrical bandwidth performances by using an analytic photodistributed current model. We adopted low-temperature-grown (LTG) GaAs-based metal-semiconductor-metal (MSM) traveling-wave photodetectors as example unit active devices in the analytic bandwidth calculation for their high-speed and high-power performances. Both VMDP and TLDP in our simulation are assumed to be transferred onto glass substrates, which would achieve high microwave velocity/impedance and make radiation loss negligible. The simulated bandwidth of a properly designed LTG GaAs MSM TLDP is /spl sim/325 GHz, which is higher than the simulated bandwidth of the LTG GaAs MSM VMDP with an open-circuit input end (/spl sim/240 GHz) and is almost comparable to the simulated bandwidth of an input-terminated LTG GaAs MSM VMDP (/spl sim/330 GHz). This proposed method can be applied to the design of high-bandwidth distributed photodetectors for radio-frequency photonic systems and optoelectronic generation of high-power microwaves and millimeter waves.