Theoretical and Experimental Study of Water Transport in a Hollow Cylinder Applied to the Drying of Round Squid Mantle

Until now, attention has been focused solely in the drying of squid mantle from an experimental point of view, neglecting the transport phenomenon studies of water in squid muscle. This work studies the drying of squid mantle (Loligo brasiliensis), previously salted and smoked by liquid smoking (hickory extract), using a tubular dryer in closed cycle with a silicagel fixed bed in series. The mass transfer phenomenon during drying was studied, based on the Fick's second law, with the effective diffusivity supposed constant, which enabled an analytical solution to the problem. The drying curve calculated with the resulting equation was compared with experimental data. The model was applied to a hollow cylinder geometry (round squid mantle), with its internal surface isolated from the drying environment by a plastic film. The latter was given a tubular form and introduced inside the mantle cavity (impervious wall boundary condition).     

Ultrasound‐activated Knoevenagel condensation of malononitrile with carbonylic compounds catalysed by alkaline‐doped saponites

α,β‐Unsaturated nitriles have been synthesized by Knoevenagel condensation of a carbonylic compound with malononitrile, assisted by sonochemical irradiation. Two alkaline‐promoted clays (Li⁺‐ and Cs⁺‐exchanged saponites) have been employed as catalysts. The influence of the carbonylic compound (benzaldehyde or cyclohexanone) and the use of a solvent on the catalytic activity have been studied. Remarkable increase in the conversion values has been found when the reaction is activated by ultrasound, as compared with the thermal activation. In this green, solvent‐free procedure, α,β‐unsaturated nitriles have been produced in very high yields (97%) when the Cs⁺‐saponite is used as catalyst. Copyright © 2004 Society of Chemical Industry     

Asymptotic stabilization of some equilibria of an underactuated underwater vehicle

The stabilization problem for selected relative equilibria of an underactuated rigid body, modelling a simple underwater vehicle, moving in an ideal fluid is addressed. State feedback control laws achieving local asymptotic stability of a forward motion and of a diving/rising with forward/reverse motion are proposed. The control design exploits the Hamiltonian nature of the system to be controlled and it is based on the so-called interconnection and damping assignment (IDA) procedure. Simulation results complete the work.     

The molecular biology of bladder carcinoma

OBJECTIVE: The clinical course of transitional cell carcinoma of the bladder can be difficult to predict due to its potential to invade the muscle layer and/or develop to a high grade lesion. Bladder carcinoma can arise from genetic changes that may activate the oncogenes (-c-erbB2, c-erbB1, c-myc, ras, etc.) and/or inactivate the suppressor genes (p53, Rb). The aim of the present study is to continue a study protocol on the molecular biology of bladder tumors. METHODS/RESULTS: From January, 1993 to January, 1995, 85 patients were studied. These patients were divided into two groups: the first group comprised 14 controls of urothelial tissue and the second comprised 65 cases of transitional cell carcinoma of the bladder. p53 expression was determined by an immunohistochemical method (NCL-p53-DO7 monoclonal antibody). Quantification of the p8 oncoprotein in cytosol and EGFR (epidermal growth factor receptor) in membrane was performed by ELISA (Oncogene Science) and RIA (Vienna Lab), respectively. A statistically significant relationship between the expression of p53 and EGFR with tumor stage and grade was found. Quantification of p185 and EGFR showed higher values in the tumor tissue than in the control samples, but a worse survival could not be determined. CONCLUSIONS: The present study shows that p53 expression can be considered to be a prognostic factor. It provides useful information on the aggressive behaviour of the tumor and has a direct relation with the survival rates.     

Use of transfer++factor in allergic bronchial asthma

The therapeutic panorama of immunomodulation and its effects on the modification of the immune reaction is reviewed. Particular reference is made to the transfer factor as a therapeutic element in bronchial asthma, which insures its efficacy or innocuity.     

Sheet molding compound characterization using spiral flow

Sheet molding compound (SMC) is a fiber‐reinforced polymeric composite. It is often used in automotive, marine, and industrial applications over other materials because of its high strength to density ratio, resistance to corrosion, and low cost. There is a demand in the SMC industry to be able to characterize SMC processability. This is particularly true for heavy truck body panels, one of the fastest growing applications of SMC. Because of their large size and high strength requirement, the molding forces have a major influence in the molding cycle. Also because of the long flow paths involved, the ability of the paste to carry glass needs to be properly characterized when developing new SMC materials. In this article, we demonstrate the benefits of using spiral flow as a processability tester. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Characterization of CuInS2 thin films for solar cells prepared by spray pyrolysis

We have made a study of the chemical composition, the electrical, the optical and the structural properties of polycrystalline CuInS₂ thin films prepared by spray pyrolysis to be used for thin film solar cells. These films were deposited starting from aqueous solutions with different chemical compositions ([Cu]/[In] and [S]/[Cu] ratios) and at different substrate temperatures. In all cases, the material is p-type with grains preferentially oriented in the (112) direction of the sphalerite structure. The electro-optical properties show a very strong dependence on the [Cu]/[In] ratio in the solution. Films with copper excess have smaller resistivity and better crystallinity than those which are stoichiometric or have indium excess. The results obtained in this work show the possibility of having CuInS₂ thin films with a wide range of resistivity, a fact that could be important for making solar cells based on this material.     

Total Energy Shaping Control of Mechanical Systems: Simplifying the Matching Equations Via Coordinate Changes

Total energy shaping is a controller design methodology that achieves (asymptotic) stabilization of mechanical systems endowing the closed-loop system with a Lagrangian or Hamiltonian structure with a desired energy function - that qualifies as Lyapunov function for the desired equilibrium. The success of the method relies on the possibility of solving two PDEs which identify the kinetic and potential energy functions that can be assigned to the closed loop. Particularly troublesome is the partial differential equation (PDE) associated to the kinetic energy which is nonlinear and inhomogeneous and the solution, that defines the desired inertia matrix, must be positive-definite. In this note, we prove that we can eliminate or simplify the forcing term in this PDE by modifying the target dynamics and introducing a change of coordinates in the original system. Furthermore, it is shown that, in the particular case of transformation to the Lagrangian coordinates, the possibility of simplifying the PDEs is determined by the interaction between the Coriolis and centrifugal forces and the actuation structure. The examples of pendulum on a cart and Furuta's pendulum are used to illustrate the results.     

Current-mode analogue defuzzifier

A CMOS current-mode approach for implementing the defuzzification function in analogue fuzzy controllers is proposed. The circuit computes the centre of area of the output fuzzy conclusion using switched current adders and a current divider. Simulation results of the defuzzifier show how the circuit can produce a good approximation of the centre of area even if a small number of levels are used to quantise the output variable.<>