Rheological evaluation of the influence of polymer concentration and molar mass distribution on the formation and performance of asymmetric gas separation membranes prepared by dry phase inversion

Asymmetric gas separation membranes were prepared by the dry-casting technique from PEEKWC, a modified amorphous glassy poly(ether ether ketone). The phase inversion process and membrane performance were correlated to the properties of the polymer and the casting solution (molar mass, polymer concentration, solution rheology and thermodynamics). It was found that a broad molar mass distribution of the polymer in the casting solution is most favourable for the formation of a highly selective membrane with a dense skin and a porous sub-layer. Thus, membranes with an effective skin thickness of less than 1 μm were obtained, exhibiting a maximum O₂/N₂ selectivity of 7.2 and a CO₂/CH₄ selectivity of 39, both significantly higher than in a corresponding thick dense PEEKWC membrane and also comparable to or higher than that of the most commonly used polymers for gas separation membranes. The CO₂ and O₂ permeance were up to 9.5×10⁻³ and 1.8×10⁻³ m³/(m² h bar) (3.5 and 0.67 GPU), respectively.     

Platinum(II) Complexes Bearing Triphenylphosphine and Chelating Oximes: Antiproliferative Effect and Biological Profile in Resistant Cells

Platinum(II) complexes of the type [Pt(Cl)(PPh₃){(κ²-N,O)-(1{C(R)=N(OH)-2(O)C₆H₄})}] with R=Me, H, ( 1 and 2 ) were synthesized and characterized. Single-crystal X-ray diffraction confirmed the proposed (SP4-3) configuration for 1 . Study of the antiproliferative activity, performed on a panel of human tumor cell lines and on mesothelial cells, highlighted complex 2 as the more effective. In particular, it showed a remarkable cytotoxicity in ovarian carcinoma cells (A2780) and interestingly, a significant antiproliferative effect on cisplatin resistant cells (A2780cis). Investigation into the intracellular mechanism of action demonstrated that 2 had a lower ability to platinate DNA than did cisplatin, which was taken as reference, and a notably higher uptake in resistant cells. A significant accumulation in mitochondria, along with the ability to induce concentration-dependent mitochondrial membrane depolarization and intracellular reactive oxygen species production, allowed us to propose a mitochondrion-mediated pathway as responsible for the interesting cytotoxic profile of complex 2 .     

MS-275 (Entinostat) Promotes Radio-Sensitivity in PAX3-FOXO1 Rhabdomyosarcoma Cells

Rhabdomyosarcoma (RMS) is the most common soft tissue sarcoma of childhood. About 25% of RMS expresses fusion oncoproteins such as PAX3/PAX7-FOXO1 (fusion-positive, FP) while fusion-negative (FN)-RMS harbors RAS mutations. Radiotherapy (RT) plays a crucial role in local control but metastatic RMS is often radio-resistant. HDAC inhibitors (HDACi) radio-sensitize different cancer cells types. Thus, we evaluated MS-275 (Entinostat), a Class I and IV HDACi, in combination with RT on RMS cells in vitro and in vivo. MS-275 reversibly hampered cell survival in vitro in FN-RMS RD (RASmut) and irreversibly in FP-RMS RH30 cell lines down-regulating cyclin A, B, and D1, up-regulating p21 and p27 and reducing ERKs activity, and c-Myc expression in RD and PI3K/Akt/mTOR activity and N-Myc expression in RH30 cells. Further, MS-275 and RT combination reduced colony formation ability of RH30 cells. In both cell lines, co-treatment increased DNA damage repair inhibition and reactive oxygen species formation, down-regulated NRF2, SOD, CAT and GPx4 anti-oxidant genes and improved RT ability to induce G2 growth arrest. MS-275 inhibited in vivo growth of RH30 cells and completely prevented the growth of RT-unresponsive RH30 xenografts when combined with radiation. Thus, MS-275 could be considered as a radio-sensitizing agent for the treatment of intrinsically radio-resistant PAX3-FOXO1 RMS.     

Influence of residual solvent on the gas transport properties of dense Hyflon® AD 60X gas separation membranes

The solvent retention by dense Hyflon AD 60X membranes were studied. The effect of the residual solvent on the transport properties of the membranes was evaluated. The permeability, diffusion coefficient and solubility of six permanent gases in membranes prepared under different conditions were determined and compared with the results of simulation studies.     

A Novel Prodrug of a nNOS Inhibitor with Improved Pharmacokinetic Potential

Under different pathological conditions, aberrant induction of neuronal nitric oxide synthase (nNOS) generates overproduction of NO that can cause irreversible cell damage. The aim of this study was to develop an amidoxime prodrug of a potent nNOS inhibitor, the benzhydryl acetamidine. We synthesized the benzhydryl acetamidoxime, which was evaluated in vitro to ascertain the potential NOS inhibitory activity, as well as conducting bioconversion into the parent acetamidine. The prodrug was also profiled for in vitro physicochemical properties, by determining the lipophilicity, passive permeation through the human gastrointestinal tract and across the blood-brain barrier by PAMPA, and chemical, enzymatic, and plasma stability. The obtained data demonstrate that the amidoxime prodrug shows an improved pharmacokinetic profile with respect to the acetamidine nNOS inhibitor, thus suggesting that it could be a promising lead compound to treat all those pathological conditions in which nNOS activity is dysregulated.     

Mechanical and barrier properties of epoxy resin filled with multi-walled carbon nanotubes

Different multi-walled carbon nanotube (MWCNT) concentrations were incorporated in an epoxy resin and both the epoxy precursor and the composite were cured at 110 °C with a tertiary amine. Infrared spectroscopy was used to follow the curing progress by determining the decrease of the band due to the epoxy group. It was shown that the presence of MWCNTs accelerates the process, halving the time for the disappearance of the epoxy band. Atomic force microscopy demonstrated that the carbon nanotubes are well embedded in the epoxy matrix and singularly dispersed or in bundles, depending on their concentration. As a consequence of the good dispersion and interpenetration of the carbon nanotubes in the epoxy matrix, the glass transition temperature increased with increasing MWCNT concentration. Dynamic-mechanical analysis indicated a higher elastic modulus, particularly at high temperatures. The study of the transport properties, sorption and diffusion of water vapour at different activities, showed improved barrier properties on increasing the CNT concentration.     

Electrospun Membranes Designed for Burst Release of New Gold-Complexes Inducing Apoptosis of Melanoma Cells

Two non-commercial metallic Au-based complexes were tested against one of the most aggressive malignant melanomas of the skin (MeWo cells), through cell viability and time-lapse live-cell imaging system assays. The tests with the complexes were carried out both in the form of free metallic complexes, directly in contact with the MeWo cell line culture, and embedded in fibers of Polycaprolactone (PCL) membranes produced by the electrospinning technique. Membranes functionalized with complexes were prepared to evaluate the efficiency of the membranes against the melanoma cells and therefore their feasibility in the application as an antitumoral patch for topical use. Both series of tests highlighted a very effective antitumoral activity, manifesting a very relevant cell viability inhibition after both 24 h and 48 h. In the case of the AuM1 complex at the concentration of 20 mM, melanoma cells completely died in this short period of time. A mortality of around 70% was detected from the tests performed using the membranes functionalized with AuM1 complex at a very low concentration (3 wt.%), even after 24 h of the contact period. The synthesized complexes also manifest high selectivity with respect to the MeWo cells. The peculiar structural and morphological organization of the nanofibers constituting the membranes allows for a very effective antitumoral activity in the first 3 h of treatment. Experimental points of the release profiles were perfectly fitted with theoretical curves, which easily allow interpretation of the kinetic phenomena occurring in the release of the synthesized complexes in the chosen medium.     

Experimental analysis and simulation of the gas transport in dense Hyflon AD60X membranes: Influence of residual solvent

The present paper discusses the tendency of solution-cast Hyflon^® AD membranes to retain unexpectedly high amounts of solvent, the possible reasons of this phenomenon and its effect on the membrane performance. Dense membranes, prepared by solution-casting and subsequent evaporation, showed large differences in their thermal, mechanical and transport properties, depending on the residual solvent content. Complete solvent removal required heating under vacuum up to well above the glass transition temperature. Analysis of the permeability, diffusion and solubility coefficients of six permanent gases showed that plasticization by the residual solvent reduces the permselectivity and increases the permeability.Data of solution-cast membranes after complete solvent removal compare well with those of a melt-pressed sample. Experimental gas transport parameters were confronted with simulated data, obtained by the Gusev-Suter Transition-State Theory (TST) method and by molecular dynamics (MD) simulations. ¹H High Resolution Magic Angle Spinning Nuclear Magnetic Resonance spectroscopic analysis of the residual solvent in the polymer matrix did not reveal a particular interaction between polymer and solvent, suggesting that the solvent retention is mainly diffusion controlled.     

Self-Healing Ability of Poly(PEGMA-5-UPy) Evaluated by Thermomechanical Analysis

The synthesis and characterization of polyethylene glycol monomethyl ether methacrylate (PEGMA) based copolymers incorporating three different percentages (2.5 wt%, 5.0 wt%, and 7.8 wt%) of urea-N-2-amino-4-hydroxy-6-methylpyrimidine-N’-(hexametylen-n-carboxyethyl methacrylate) (HEMA-UPy) are reported. Nuclear magnetic resonance (NMR) and infrared spectroscopy (IR) confirm the synthesis procedure. Differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) are employed to evaluate the thermal properties of the samples. DSC measurements evidence a slight increase in glass transition temperature (T_g), a consistent increase in crystallization and melting temperatures (T_c and T_m), and a reduction in the crystallization degree (X_c) with increasing the amount of HEMA-UPy moiety. Dynamic mechanical analysis (DMA) is carried out at different values of temperature and oscillation frequency. It highlights the ability of the healed copolymer to recover the pristine values of storage modulus. The healing efficiency depends on the temperature history of the sample. For the sample healed at room temperature, the value of healing efficiency is 64%. DMA tests performed at higher temperatures, after some permanence at room temperature, evidence higher values in the healing efficiency. This demonstrates that the higher value of the temperature employed during DMA tests determines greater mobility of the chains causing an enhancement in the healing efficiency.