Mechanical properties of polyethylene mixtures crystallized under high pressure

The mechanical properties of a medium molecular weight polyethylene (MMW‐PE) and an ultrahigh molecular weight PE (UHMW‐PE) binary mixture with different weight fractions crystallized from the melt at 0.1 and 450 MPa were studied. The tensile modulus, yield stress, and strain were obtained as a function of the weight fractions in the PE mixtures at 25 and 85°C. The tensile modulus in the sample crystallized at 0.1 MPa decreased from 1.5 GPa of pure MMW‐PE to about 0.4 GPa of pure UHMW‐PE with the UHMW‐PE content but it did not decrease with the UHMW‐PE in the sample crystallized at 450 MPa in testing at 25°C. A decreasing rate of the storage modulus E′ of UHMW‐PE in a dynamic measurement for the sample crystallized at 0.1 MPa with the temperature is larger than that of the sample crystallized at 450 MPa. These experimental facts are interpreted in relation to the molecular motion and crystallinity of the sample. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 87: 1962–1968, 2003     

One-Step Synthesis of Luminescent Nanoparticles of Complex Oxide, Strontium Aluminate

An organic aqueous solution of metal acetylacetonate precursors was subjected to spray pyrolysis in order to fabricate SrAl₂O₄:Eu (SAO) nanoparticles. Non-agglomerated luminescent SAO nanoparticles, having a spherical shape with a size of 10–30 nm, were achieved in a single step, while only submicrometer-sized SAO particles were obtained from the conventional ultrasonic pyrolysis of the metal nitrates. Without any post-annealing process, the as-prepared SAO nanoparticles were observed to exhibit a strong photoluminescence, which is comparable with that of the submicrometer-sized SAO particles. A mechanism for the formation of the nanoparticles is also discussed.     

The synthesis of amorphous M-Si (M=transition metal) alloy powders by mechanical alloying

Crystalline powders of Si and M (transition metal) in the composition ratio Si M = 2 1 were mechanically alloyed by a laboratory ball mill in an inert atmosphere. The progress of the mechanical alloying was identified by X-ray diffraction. The amorphization reaction between Si and M proceeded according to a second-order reaction. The sequence of the rate of amorphization reaction for the Si-M system was Mn > Ti > V > Ni > Co. The sequence of the rate was correlated to the volume ratio (V _M/V_Si) of the Si-M system except for Si-Ni system. The crystallization of Si-Mn, of which the MA rate was fastest, was studied by means of X-ray diffraction, differential thermal analysis (DTA) and electrical resistivity measurement. We observed parallel changes on crystallization between the thermal event in the DTA tracing and the change of electrical resistance.     

Chemical response of Picea glehnii seed-epiphytic Penicillium species to Pythium vexans under in vitro competitive conditions for mycelial growth

The potential protection of Picea glehnii seedlings from damping-off by seed-epiphytic Penicillium species was investigated. We studied the chemical response of seed-epiphytic Penicillium species (Pen. cyaneum, Pen. damascenum, and Pen. implicatum) to Pythium vexans, a damping-off fungus, in vitro. Penicillium species were cultured singly or cocultured with Pyt. vexans for 14 or 18 d, and mycelial growth, pH of culture filtrate, antifungal activity of the culture filtrate against Pyt. vexans, and the amount of antifungal compound produced by each Penicillium species, were examined. The filtrate of both the single culture of Penicillium and the coculture of Penicillium and Pyt. vexans showed antifungal activity against Pyt. vexans. In a coculture with Pyt. vexans, Pen. cyaneum produced an antifungal compound (patulin) as in the single culture. Pen. damascenum cocultured with Pyt. vexans produced an antifungal compound (citrinin), as it did in the single culture and in larger amounts on day 10. Pen. implicatum produced two antifungal compounds, frequentin and palitantin, and the ratio of frequentin (with higher antifungal activity than palitantin) to palitantin was higher in the coculture with Pyt. vexans than in the single culture. Our results indicate that these Penicillium species have the ability to produce antifungal compounds and to keep antifungal activity under competitive condition with Pyt. vexans. The chemical response of these Penicillium species to Pyt. vexans may contribute to protect P. glehnii seedlings from damage by Pyt. vexans.     

Study of pesticide residues in agricultural products for the "Positive List" system

During a 3-year monitoring survey (April 2002-March 2005) of pesticide residues in agricultural products, 592 samples (324 domestic; 268 imported) collected in Hyogo prefecture, Japan were analyzed. The number of pesticides tested increased from 232 in FY 2002 to 323 in FY 2004. The purpose of the study was to clarify the residue status by accumulating information about pesticides detected frequently, to allow effective and efficient regulation under the new "Positive List" legislation to be implemented in FY 2006. Overall, 47% of domestic and 61% of imported samples contained detectable residues and ca. 60% of positive samples contained multiple residues. The limit of quantitation was set at 0.01 microg/g and the limit of detection was 0.001-0.003 microg/ g. Most of the residues were present at low concentrations: 80% of the detections in samples excluding imported citrus fruits were < 0.05 microg/g. More than 5 different pesticides (> 0.01 microg/g) were detected simultaneously in 13 samples. The sum of the ratios of residues to MRLs was calculated as one of the indexes to represent the risk of multiple residues, and they exceeded 100% in 3 imported frozen vegetables; baby kidney bean, spinach, Welsh onion. Samples in violation of the Food Sanitation Law were not found in our survey, but 1.9% of the samples might be in conflict with the new "Positive List" legislation.     

Carbonization of aromatic hydrocarbons—V: Microscopic features of carbons obtained by the aid of catalysts

Microscopic observation of carbons obtained from pure aromatic hydrocarbons by the aid of carbonization catalysts was carried out to clarify the microstructure of these carbons of different features. Reflected polarized-light microscopy distinguished needle, mosaic and isotropic cokes, former two of which were produced with aluminum chloride and the last with potassium. High resolution microscopy revealed that these carbons calcined at 1250° had different degree of layered structure, corresponding to the crystallographic parameters of these samples graphitized at 2500°C. The reasons for the carbons produced with potassium to be non-graphitizable are discussed from the macro- and micro-features of the carbons.     

Modifying carbonization properties of pitches. 3. Carbonization of modified quinoline-insoluble matter from pitches

The carbonization of solubilized matter obtained from the hydrogenated and reductively alkylated quinoline-insolubles of pitches was studied to clarify the different carbonization properties shown by these materials. Dehydrogenation of hydrogenated QI started at 200 °C but continued until 400 °C, passing through a fused phase to give graphitizable carbon. In contrast, alkylated QI gave non-graphitizable carbon because it readily reverted to QI by dealkylation below 300 °C, before fusion. QI alkylated with butyl or benzyl groups was found to be nearly 80% soluble in benzene.     

Properties of novel diallyl phthalate resin modified with sulfur‐containing allyl ester compounds

Sulfur‐containing allyl ester, which reacts with diallyl phthalate (DAP) resin to have allyl groups, was synthesized by the reaction of allyl phthalic acid with bisphenol having sulfur atoms. The sulfur‐containing allyl ester compound was blended with DAP resin to improve the adhesive properties to copper. By modification with sulfur‐containing allyl ester compound, the T‐peel adhesive strength and the lap shear adhesive strength to copper was improved. In particular, the adhesive strength was greatly improved when the resin was modified with the allyl ester compound having a disulfide bond (?S?S?) (DADS). It is concluded that this result is due to the improvement of the interfacial adhesive strength because the sulfur atom was found to be located in the surface of the copper by Fourier transform infrared (FTIR) analysis. The glass transition temperature (T_g) and the thermal decomposition temperature (T_d) of the cured DAP resin modified with DADS slightly decreased with increasing concentration of DADS. The lowering of T_g is because the crosslinking density of the DAP resin modified with DADS is smaller than that of DAP resin. Moreover, from thermogravimetric analysis, the lowering of Td of the DAP resin modified with DADS is because DADS is likely to pyrolyze. © 2013 Society of Chemical Industry