Cyromazine toxicity in different laboratory strains of the tobacco hornworm (Lepidoptera:Sphingidae)

Three different strains of tobacco hornworm, Manduca sexta (L.), were treated with cyromazine ingestion of cyromazine-treated artificial diet or by intrahemocoelic injection. The effect of cyromazine on larval growth and the onset and severity of poisoning symptoms were similar in the wild-type green-pigmented strain and the white-pigmented mutant. Feeding times of 4 h or greater and injected doses of 22.6 micrograms/g larva or more resulted in lower weight gains than were observed with controls. Elongation caused by exposure was evident within 12-24 h. The incidence of cuticular rupture was 55 and 67% in the dietary exposure tests and 24 and 22% in the injection tests for the green and white strains, respectively. The response of the black strain to cyromazine differed by the route of administration. Like the other strains, dietary exposure times of 4 h or greater led to smaller weight gains than in the controls. Injected doses of 2.8 micrograms/g larva or more caused a decrease in the weight gain of the treated versus controls. A smaller proportion (21%) of black larvae consuming treated diet developed cuticular ruptures, whereas injected treatments had a higher incidence (87%). The differences in the pigmentation of the white and black strains had been linked to high and low juvenile hormone titers, respectively. The greater susceptibility of the juvenile hormone-deficient black strain raises the possibility that the mode of action of cyromazine involves a hormonal component. In a separate series of experiments, the poisoning symptoms of cyromazine were attenuated or eliminated by periods of starvation of 1-3 d following exposure to the chemical. Starvation for 3 d preceding treatment attenuated but did not eliminate signs of poisoning.     

The future beckons [electric power industry]

This paper discusses the challenges that the US electric power industry has to face to continue to maintain the stable, reliable, and efficient system over the next few years. These challenges include an aging transmission system suffering from substantial underinvestment, the need for a regulatory framework that will spur independent investment, ownership and management of the nation's grid, and an aging workforce and the need for a succession plan to ensure the existence of the next generation of technical expertise in the industry. Through the efforts of many and by working together through concerned organizations, the industry can move forward to the benefit of the public and the US as a whole.     

Familial ring (19) chromosome mosaicism: case report and review

Ring (19) chromosomal mosaicism has been identified in a 14-month-old girl referred for cytogenetic evaluation due to microcephaly and developmental delay with autistic-like mannerisms. An analysis of her peripheral blood lymphocytes showed a 46,XX,r(19) cell line in 119/121 of cells examined. Of the two remaining cells, one had a normal female chromosome complement and the other showed loss of one of the chromosome 19 homologs. Further analysis by fluorescence in situ hybridization using an all human telomere probe showed the presence of a single hybridization signal on the r(19) chromosome. Subsequent cytogenetic characterization of cells derived from the patient's phenotypically normal mother also demonstrated the presence of a ring 19 chromosome in 4/100 cells. The remaining cells had a normal female chromosome complement. These findings represent the first reported case of familial ring 19 mosaicism. The cytogenetic and clinical findings in these two individuals are discussed in relation to six previously reported cases of de novo ring chromosome 19 mosaicism.     

A stingray spine in the scapula of a bottlenose dolphin

A stingray spine was found lodged in the scapula of a deceased 272 cm, male bottlenose dolphin (Tursiops truncatus) from South Carolina (USA) following skeletal preparation, nearly 6 mo after necropsy. No external puncture wound, internal bruising, or laceration of muscle tissue surrounding the scapula was evident during necropsy of the animal. Implantation of the spine did not appear to be related to the death of the dolphin, but probably occurred at an early age. Abnormal development of bone surrounding the spine resulted in the formation of a cavity at the wound site. Two mechanisms were considered as contributors for the cavity formation. These were the mechanical action of the spine stimulating the body's defense system for managing foreign objects, and the release of potent toxins from the spine sheath.     

Thermally and plastically induced residual strains in textured Zircaloy-2 plate

The residual intergranular strains in textured Zircaloy-2 plate samples induced by cooling from 823 K to ambient temperatures, by cold-rolling by 1.5% and 25% and by deforming in tension by 1.5% were measured by neutron diffraction. The strong rolling texture, which gives rise to two ideal orientations, permitted the interpretation of much of the data in terms of strain tensors for the two orientations. The experimental results were compared with calculations based on the elasto-plastic self-consistent model with no adjustable parameters. Close agreement was obtained for samples in the as-cooled state and deformation in tension by 1.5% but the agreement is less satisfactory for cold-rolling.     

Plumbagin,a Biomolecule with (Anti)Osteoclastic Properties

Plumbagin is a plant-derived naphthoquinone that is widely used in traditional Asian medicine due to its anti-inflammatory and anti-microbial properties. Additionally, plumbagin is cytotoxic for cancer cells due to its ability to trigger reactive oxygen species (ROS) formation and subsequent apoptosis. Since it was reported that plumbagin may inhibit the differentiation of bone resorbing osteoclasts in cancer-related models, we wanted to elucidate whether plumbagin interferes with cytokine-induced osteoclastogenesis. Using C57BL/6 mice, we unexpectedly found that plumbagin treatment enhanced osteoclast formation and that this effect was most pronounced when cells were pre-treated for 24 h with plumbagin before subsequent M-CSF/RANKL stimulation. Plumbagin caused a fast induction of NFATc1 signalling and mTOR-dependent activation of p70S6 kinase which resulted in the initiation of protein translation. In line with this finding, we observed an increase in RANK surface expression after Plumbagin stimulation that enhanced the responsiveness for subsequent RANKL treatment. However, in Balb/c mice and Balb/c-derived RAW264.7 macrophages, these findings could not be corroborated and osteoclastogenesis was inhibited. Our results suggest that the effects of plumbagin depend on the model system used and can therefore either trigger or inhibit osteoclast formation.     

Characterization and tests of planar Co3O4 model catalysts prepared by chemical vapor deposition

The chemical vapor deposition method was used to deposit thin films of cobalt oxide starting with cobalt (II) acetylacetonate and oxygen. The deposition process was investigated and the obtained films were identified as a cubic spinel-type polycrystalline Co₃O₄ with a crystallite size of 30–40 nm. The coating was carbon-free and the surface oxygen concentration was measured to be 66 at.% with AES analysis. Smooth and highly uniform thin films were deposited on planar stainless steel substrates and subjected to TPR and catalysis tests that show positive correlation. The apparent activation energy of Co₃O₄ reduction to CoO was measured to be (33±5) kJ/mol. The catalytic activity of Co₃O₄ was investigated toward the conversion of both propane and ethanol to carbon dioxide. Though the catalytic action was registered at the same temperature, the deactivation process was seen to be different. The catalytic conversion of ethanol induces a fast deactivation process, which was linked to its high ability to reduce Co₃O₄.     

Characterisation of the adsorption sites of hydrogen on Pt/C fuel cell catalysts

A key component of a hydrogen fuel cell is a catalyst to dissociate dihydrogen to hydrogen atoms. In the present study, the adsorption of hydrogen on Pt/C fuel cell catalysts has been investigated by inelastic neutron scattering spectroscopy.

Monitoring a clean Pt(50%)/C catalyst with low energy neutron spectroscopy, after exposure to dihydrogen at 20 K, as it was heated to room temperature, showed three distinct temperature regimes: (i) a decrease in intensity from 10 to 60 K, (ii) a rise to a maximum between 60 and 120 K and then (iii) a slow fall-off towards room temperature. We assign the three regions as: (i) desorption of physisorbed dihydrogen, (ii) dissociation of dihydrogen to give an adsorbed layer and (iii) damping of the response by an increasing Debye–Waller factor.

The vibrational INS spectra of a series of Pt/C catalysts prepared under varying conditions were similar indicating that the same types of site are common to all the catalysts, although the relative proportions of each site are sample dependent. Features at 520, 950 and part of the intensity at 1300 cm⁻¹ are assigned to hydrogen on (1 1 1) faces, in good agreement with single crystal data. The mode at 640 cm⁻¹ is assigned as the doubly degenerate asymmetric stretch of Pt(1 0 0) faces with the symmetric stretch near 550 cm⁻¹.

We assign the bending mode of the on-top site to the feature at 470 cm⁻¹. The Pt–H stretch mode was observed at 2079 cm⁻¹. This is a significant result: this is the first time that hydrogen on the on-top sites has been observed on nanosized platinum particles supported on high surface area carbon black. The width of the INS peak is surprisingly large and may give additional information on the type and relative proportions of the crystallographic faces present on the catalyst particles.     

Parallel evolution using multi-chromosome cartesian genetic programming

Parallel and distributed methods for evolutionary algorithms have concentrated on maintaining multiple populations of genotypes, where each genotype in a population encodes a potential solution to the problem. In this paper, we investigate the parallelisation of the genotype itself into a collection of independent chromosomes which can be evaluated in parallel. We call this multi-chromosomal evolution (MCE). We test this approach using Cartesian Genetic Programming and apply MCE to a series of digital circuit design problems to compare the efficacy of MCE with a conventional single chromosome approach (SCE). MCE can be readily used for many digital circuits because they have multiple outputs. In MCE, an independent chromosome is assigned to each output. When we compare MCE with SCE we find that MCE allows us to evolve solutions much faster. In addition, in some cases we were able to evolve solutions with MCE that we unable to with SCE. In a case-study, we investigate how MCE can be applied to to a single objective problem in the domain of image classification, namely, the classification of breast X-rays for cancer. To apply MCE to this problem, we identify regions of interest (RoI) from the mammograms, divide the RoI into a collection of sub-images and use a chromosome to classify each sub-image. This problem allows us to evaluate various evolutionary mutation operators which can pairwise swap chromosomes either randomly or topographically or reuse chromosomes in place of other chromosomes.