射孔枪+内置式压力计托筒+水力泵新三联作试油(测试)工艺技术在大港油田研制与应用

该工艺技术是在原三联作(TCP+MFE+JET)基础上,根据大港油田勘探试油(测试)的需要,研制开发出的又一新技术,与原三联作相比,一趟管柱不但完成求产、测压、泵排工作,而且还能进行酸化等措施,提高了资料品质,减少了作业成本。经过6井次现场应用,全部达到了设计要求,取得了工艺、资料、成本、速度的较大进步,具有较高推广应用价值。     

CDMA发射分集系统的多用户检测常模算法分析

空时分集技术的最大优点在于在不增加带宽的情况下可以提高系统的可靠性,是目前移动通信的研究热点.常模算法是一种性能优良的码分多址(CDMA)盲多用户检测技术,能确保判决信号与实际传送信号之间的差错较小,误码率性能良好.文中提出将标准线性受限常模算法(LCCMA)与空时分组码(STBC)相结合,设计出一种收敛快、能够改善系统性能的基于2-空时分组码的多用户接收机.     

基于可寻址分支分配器的CATV收费系统

给出了一种基于可寻址分支分配器的ＣＡＴＶ收费管理系统设计方案，并着重介绍了系统的工作原理及可寻址分支分配器的设计。     

制革用水乳型聚氨酯涂饰剂行业标准的制定

本文概述了制定该标准的背景，对标准的主要内容加以科学的阐述。     

Design and analysis of low-power cache using two-level filter scheme

Power consumption is an increasingly pressing problem in modern processor design. Since the on-chip caches usually consume a significant amount of power, it is one of the most attractive targets for power reduction. This paper presents a two-level filter scheme, which consists of the L1 and L2 filters, to reduce the power consumption of the on-chip cache. The main idea of the proposed scheme is motivated by the substantial unnecessary activities in conventional cache architecture. We use a single block buffer as the L1 filter to eliminate the unnecessary cache accesses. In the L2 filter, we then propose a new sentry-tag architecture to further filter out the unnecessary way activities in case of the L1 filter miss. We use SimpleScalar to simulate the SPEC2000 benchmarks and perform the HSPICE simulations to evaluate the proposed architecture. Experimental results show that the two-level filter scheme can effectively reduce the cache power consumption by eliminating most unnecessary cache activities, while the compromise of system performance is negligible. Compared to a conventional instruction cache (32 kB, two-way) implemented with only the L1 filter, the use of a two-level filter can result in roughly 30% reduction in total cache power consumption. Similarly, compared to a conventional data cache (32 kB, four-way) implemented with only the L1 filter, the total cache power reduction is approximately 46%.     

A study on the anodic protection of Titanium evaporators in Al2(SO4)3 solution

The feasibility of the anodic protection of titanium evaporators in Al₂(SO₄)₃ solution was studied by the measurement of polarization curves, weight loss, solubility of passive film and AC impedance. The protection parameters and efficiency were determined. In addition, the practical technology of anodic protection was studied by screening reference electrodes and auxiliary cathodes. Throwing power was also measured. Four rows of tube-type evaporators of titanium have been anodically protected in situ. Field tests lasting more than one year show satisfactory results.     

方盒形带凸缘件的板料形状优化设计

本文用大变形刚塑性有限元模拟正方形板料在方冲头拉延下的凸缘变形过程，并以所获得的工件形状与金属流动方向为依据，对初始板料形状进行修正。对修正后的坯料形状进行二次模拟，获得了与给定凸缘形状基本吻合的拉延件形状。文中对不同凸缘圆角对极料优化形状的影响作了计算，讨论了在保证边界轮廓位置不变的条件下网格划分的方法。     

热致液晶性纤维素衍生物及其热塑性塑料复合物熔体流变行为的研究

用毛细管流变仪研究了乙基纤维素（ＥＣ）及其高密度聚乙烯（ＨＤＰＥ）复合物，纤维素芳族酯（ＣＡＥ）及其聚碳酸酯（ＰＣ）复合物的剪切流变特性和机理。结果表明，ＥＣ对ＨＤＰＥ／ＥＣ复合物的粘度影响不大，而少量（５％）ＣＡＥ的加入使ＰＣ／ＣＡＥ复合物粘度大大下降，且复合物流变曲线呈现新的特征。     

陆希杰的假建筑

陆希杰目前操作的建筑里,我觉得有趣会被诱引思考的,是他处理外在客观现实与内在主观思维时二者间自我定位的思索。这问题本来都存在于大半有心的设计人身上,但似乎都没有在陆希杰身上看起来这么严重。也就是说,大半的人尽管也是在走那条细微的钢索,却似乎都能找到一根安身立命     

天线方向图的复射线仿真

根据复射线理论，利用复源点高斯波束场来模拟天线的远场方向图。本文提出三种模拟方法，即主瓣匹配法，峰值匹配法和逐点匹配法，给出了多种方向图的仿真结果。数值分析和优化结果表明，复射线峰值匹配法是一种精确实用的天线方向图仿真技术。