Destruction of Tl-Ba-Ca-Cu-O superconductors by water

Mixtures of Tl₂CaBa₂Cu₂O_9±x and Tl₂Ca₂Ba₂Cu₃O_10±x superconductors were treated with water at 25, 70 and 100 °C for different lengths of time from 1 min to 10 h. X-ray powder diffraction patterns and magnetic susceptibilities of the fresh and the water treated samples are compared. In contrast to most Y- and Bi-based superconductors, the Tl-based samples are stable in the presence of water at low temperatures (70 °C), but decompose rapidly at 100 °C.     

Rheology of polyflavonoid tannin–formaldehyde reactions before and after gelling. II. Hardener influence and comparison of different tannins

Good correspondence of the gel‐time values obtained by two different methods, G′ = G″ and 1/η₀→0, was observed for different types of natural and modified tannin extracts. The pH presents the predominant effect on both the activation energies and the gel times observed, while the proportion of a paraformaldehyde hardener has a much lesser effect on these parameters. The rate constants of the different phases of the reaction of polycondensation with formaldehyde, both before and after the gel point, were obtained for the six commercial tannin extracts tested. The viscoelastic properties of the different tannins/formaldehyde gels were measured. The gel stiffness S, relaxation coefficient n, and relaxation time λ were determined and their dependence on the proportion of the formaldehyde hardener, on the temperature, and on the type of tannin was determined. The gel stiffness S appears to be influenced considerably by the proportion of the formaldehyde hardener. Its value decreased as the percentage of the hardener increased: This was due to early network immobilization and the resulting lower level of crosslinking resulting from it. The influence on S of the temperature is not very pronounced. The relaxation coefficient n appears to depend mainly on the reactivity of the tannin used: The faster the reactivity, the higher was the value of n. This appears to be valid exclusively in tannin extracts where the colloidal state is still present, while it is not valid in extracts where the colloidal state was eliminated by, for example, solvent extraction. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 864–871, 2002     

改性γ-聚谷氨酸去除重金属Pb2+性能研究

研究了不同改性水平的γ-聚谷氨酸(以下简写为γ-PGA)吸附去除水体中重金属离子Pb2+的性能影响。研究结果表明,交联改性后的γ-PGA与未改性的γ-PGA相比,具有更好的Pb2+吸附性能,在将改性γ-PGA加入到含有Pb2+的水体中并均匀混合之后,随着交联度的提高,改性γ-PGA吸附Pb2+的性能逐渐增加,但在吸附最终结束时,不同改性的γ-PGA对Pb2+吸附去除率均在99%以上。在吸附去除Pb2+影响因素分析中发现Pb2+初始质量浓度和溶液pH对不同改性的γ-PGA吸附去除Pb2+性能的影响较大。随着Pb2+质量浓度的增加,不同改性水平γ-PGA对Pb2+的去除率均略有一定程度的下降。当溶液的pH控制在中性或者偏碱性时,25%改性γ-PGA对Pb2+的去除率能够保持在99%以上,当pH降至4.5和3时,Pb2+去除率分别降为90.76%和78.46%。     

Alkaline hydrolysis of the cyclic nitramine explosives RDX,HMX, and CL-20: new insights into degradation pathways obtained by the observation of novel intermediates

Hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX, I) and octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine (HMX) hydrolyze at pH > 10 to form end products including NO2-, HCHO, HCOOH, NH3, and N2O, but little information is available on intermediates, apart from the tentatively identified pentahydro-3,5-dinitro-1,3,5-triazacyclohex-1-ene (II). Despite suggestions that RDX and HMX contaminated groundwater could be economically treated via alkaline hydrolysis, the optimization of such a process requires more detailed knowledge of intermediates and degradation pathways. In this study, we hydrolyzed the monocyclic nitramines RDX, MNX (hexahydro-1-nitroso-3,5-dinitro-1,3,5-triazine), and HMX in aqueous solution (pH 10-12.3) and found that nitramine removal was accompanied by formation of 1 molar equiv of nitrite and the accumulation of the key ring cleavage product 4-nitro-2,4-diazabutanal (4-NDAB, O2NNHCH2NHCHO). Most of the remaining C and N content of RDX, MNX, and HMX was found in HCHO, N2O, HCOOH, and NH3. Consequently, we selected RDX as a model compound and hydrolyzed it in aqueous acetonitrile solutions (pH 12.3) in the presence and absence of hydroxypropyl-beta-cyclodextrin (HP-beta-CD) to explore other early intermediates in more detail. We observed a transient LC-MS peak with a [M-H] at 192 Da that was tentatively identified as 4,6-dinitro-2,4,6-triaza-hexanal (O2NNHCH2NNO2CH2NHCHO, III) considered as the hydrolyzed product of II. In addition, we detected another novel intermediate with a [M-H] at 148 Da that was tentatively identified as a hydrolyzed product of III, namely, 5-hydroxy-4-nitro-2,4-diaza-pentanal (HOCH2NNO2CH2NHCHO, IV). Both III and IV can act as precursors to 4-NDAB. In the case of the polycyclic nitramine 2,4,6,8,10,12-hexanitro-2,4,6,8,10,12-hexaazaisowurtzitane (CL-20), denitration (two NO2-) also led to the formation of HCOOH, NH3, and N2O, but neither HCHO nor 4-NDAB were detected. The results provide strong evidence that initial denitration of cyclic nitramines in water is sufficient to cause ring cleavage followed by spontaneous decomposition to form the final products.     

Vibrational spectra and dissociation of aqueous Na2SiO3 solutions

To facilitate molecular spectroscopic observation of the mysterious transition of dissolved sodium silicate molecules into nanoparticles of desired silica gel and zeolite structures, the IR and Raman spectra of Na₂H₂SiO₄ monomers are studied here in details. It is demonstrated that the 3–0.2 mol/L aqueous solutions of Na₂SiO₃ and Na₂SiO₃ × 9H₂O contain mostly Na₂H₂SiO₄ monomers dissociated about 30%–80%, respectively. In contrast to the common belief the Si–O vibrations of these monomers depend on their dissociation level generating FTIR and Raman bands which are frequently associated with polymer silica structures in the current literature. To stay consistent with the molweight and dissociation measurements, these vibrational assignments are revised in this paper. Some unique and unexpected effects of D₂O used instead of H₂O as solvent are also reported.     

Predictors of high-risk alcohol consumption in young offenders on community orders: Policy and treatment implications.

The present study examined the relationship between a set of individual and contextual variables and high-risk alcohol use among young offenders placed on community orders in New South Wales, Australia. Participants (n = 777) were compared on a set of factors known to be strong predictors of high-risk alcohol use among adolescents. The authors assessed the strength of the relationship between gender, age, ethnicity, geographical region of residence, school attendance, father absence, history of childhood trauma, and the presence of severe conduct disorder on weekly levels of alcohol use. Living in rural locations, not currently attending school, being female, and not having been raised with a biological father present were associated with significantly increased odds of alcohol abuse. Father absence was a more important risk factor for rural young offenders, but school dropout was associated with more hazardous drinking among young offenders in urban areas. Accordingly, the authors suggest family-focused intervention programs for young offenders living in rural areas and school-based programs for vulnerable young people living in urban areas, although programs should consider including both factors for both groups if feasible and warranted. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

WATER FLOW AND BINDER MIGRATION DURING DRYING OF COATED PAPER

The aim of this study has been to develop a mathematical model for water flow and binder migration in coated paper. The model can be used for simulation of the stages starting after the coating applicator including infrared and air drying sections. On the basis of the model the moisture, temperature and binder distribution can be determined across the paper thickness. Approximating equations concerning the paper properties are used in the model. We have measured the diffusion coefficient between the water and binder substances. Representative numerical examples are presented for separate and combined infrared and air drying processes.     

Quantum dot light emitting devices for photomedical applications

While OLEDs have struggled to find a niche lighting application that can fully take advantage of their unique form factors as thin, flexible, lightweight and uniformly large‐area luminaire, photomedical researchers have been in search of low‐cost, effective illumination devices with such form factors that could facilitate widespread clinical applications of photodynamic therapy (PDT) or photobiomodulation (PBM). Although existing OLEDs with either fluorescent or phosphorescent emitters cannot achieve the required high power density at the right wavelength windows for photomedicine, the recently developed ultrabright and efficient deep red quantum dot light emitting devices (QLEDs) can nicely fit into this niche. Here, we report for the first time the in‐vitro study to demonstrate that this QLED‐based photomedical approach could increase cell metabolism over control systems for PBM and kill cancerous cells efficiently for PDT. The perspective of developing wavelength‐specific, flexible QLEDs for two critical photomedical fields (wound repair and cancer treatment) will be presented with their potential impacts summarized. The work promises to generate flexible QLED‐based light sources that could enable the widespread use and clinical acceptance of photomedical strategies including PDT and PBM.     

Single Soybean Seed NMR Calibration for Oil Measurement Using Commercial Cooking Oils

Development of high oil soybeans would reduce the cost of soybean oil production for biodiesel or edible oil applications. An accurate determination of soybean seed oil concentration is essential especially when developing superior cultivars with increased seed oil content. The objective of this study was to develop an oil measurement method for single seeds using NMR spectrometry. An NMR spectrometer was calibrated using commercial cooking oil. Fifteen cultivars of known mean oil content were used to evaluate the calibration curves. The calibration curves developed had a correlation coefficient of 0.99. It was found that soybean and corn oil gave identical results over the calibrated interval.