A parametrization for dissipative behaviors

The behavioral equivalent of single input single output (SISO) systems are behaviors with two manifest variables. Passive SISO systems can, therefore, be viewed as J-dissipative behaviors with two manifest variables. Here the special matrix J defines a QDF that captures the passivity property of SISO systems. In this paper, we investigate more general QDFs Q_Φs induced by some operator Φ. These QDFs define some relation between the input, the output and their derivatives of a SISO system. We characterize all behaviors that are dissipative with respect to the prescribed QDF Q_Φ. In fact, we parametrize all the behaviors dissipative with respect to Q_Φ in terms of those dissipative with respect to the special QDF Q_J induced by the matrix J. Similar results can also be given for lossless systems.     

A novel microfluidic switch for pH control using Chitosan based hydrogels

We report a novel pH-sensitive hydrogel based micro-valve for metered flow that has applications in a laboratory made “Intelligent valving system”. The hydrogel solution was prepared through Chitosan and poly vinyl alcohol in acetic acid and crystallized using gluteraldehyde as the crosslinking agent in the form of thin wafers and it was found to be very sensitive to pH changes. The pore structure of hydrogel was investigated through Field Emission Scanning Electron Microscopy and thin wafers of the gel were physically placed inside PDMS microchannels. Flow metering in these channels was observed by controlled expansion of the hydrogel plug till complete valving was realized. This valving device was further precisely characterized with micro Particle Image Velocimetry using a solution containing fluorescent polymeric micro beads. The principle advantage of this hydrogel device is the smaller range of pH (varying between pH 3 and 7) over which the valving response is observed.     

Ti3AlC2 coated D-shaped fiber saturable absorber for Q-switched pulse generation

In this letter, a titanium aluminum carbide (Ti3AlC2) coated D-shaped fiber is proposed and demonstrated as a new saturable absorber (SA) for Q-switched laser pulse generation. In preparing the SA, the Ti3AlC2 powder is dispersed in liquid polyvinyl alcohol (PVA) before the solution is dropped and left to dry onto a polished surface of D-shape fiber. The SA is added to an erbium-doped fiber laser (EDFL) cavity to modulate the cavity loss for Q-switching. The Q-switched laser is obtained at 1 561 nm. The pulse width of the pulses can be varied between 7.4 µs and 5.1 µs with a corresponding repetition rate range from 41.26 kHz to 54.35 kHz, when the pump power is increased from 42.2 mW to 71.5 mW. At 71.5 mW pump, the pulse energy is obtained at 70.3 nJ. The signal-to-noise ratio (SNR) of the fundamental frequency is recorded at 67 dB, which indicates the stability of the laser.     

Survey of GPU Based Sorting Algorithms

Parallel sorting algorithms are widely studied nowadays. After the introduction of parallel processors such as graphics processing unit (GPU) and easy to use parallel programming languages such as CUDA and OpenCL, literature on parallel sorting algorithms has become vast and richer with new ideas and techniques applied to solve the famous problem of sorting. This paper presents a survey of GPU based sorting algorithms. Four sorting algorithms have been selected for this survey: Radix sort, Merge sort, Sample sort and Quick sort. Methods used in those algorithms are described in brief. The performance of these algorithms as claimed by their authors is also presented. A comparative analysis based on the literature is depicted.     

Simulation and analysis of Awerbuch–Peleg and GSM schemes for location tracking of mobile users

Mobile users are increasingly demanding full access to networked communications while they are on the move. Several studies have shown that the overhead incurred by the network to keep track of the current location of mobile users is considerably high. The methods currently used for location tracking incur heavy unnecessary costs by requiring that users update locations in their home networks after each move regardless of the distance at which the move occurs, and that all search attempts for a mobile user are first routed to that user's home network. The Awerbuch–Peleg scheme presents a formal model for location tracking which attempts to minimize the cost of local operations—both move and find operations—through the construction of a regional hierarchy. In this paper we present a performance evaluation of the Awerbuch–Peleg scheme. We also compare its performance to that of the GSM‐based location tracking scheme. It is found that the Awerbuch–Peleg scheme in general results in higher costs than the GSM scheme. The reason for this is found to be some unexpected properties of the read and write sets which are key components of the Awerbuch–Peleg scheme. Copyright © 2001 John Wiley & Sons, Ltd.     

Nanowire Assisted Mechanotyping of Cellular Metastatic Potential

Nanotechnology has provided tools for next generation biomedical devices which rely on nanostructure interfaces with living cells. In vitro biomimetic structures have enabled observation of cell response to various mechanical and chemical cues, and there is a growing interest in isolating and harnessing the specific cues that 3D microenvironments can provide without the requirement for such culture and the experimental drawbacks associated with it. Here, a randomly oriented gold coated Si nanowire substrate with patterned hydrophobic–hydrophilic areas for the differentiation of isogenic breast cancer cells of varying metastatic potential is reported. When considering synthetic surfaces for the study of cell-nanotopography interfaces, randomly oriented nanowires more closely resemble the isotropic architecture of a natural extracellular matrix. In the study reported here, the authors show that primary cancer cells preferably attach to the hydrophilic region of randomly oriented nanowire substrate while secondary cancer cells do not adhere. Using machine learning analysis of fluorescence images, cells are found to spread and elongate on the nanowire substrates as compared to a flat substrate, where they mostly remain round. Such platforms can not only be used for developing bioassays but also as stepping stones for tissue printing technologies where cells can be selectively patterned at desired locations.     

Composite‐Scattering Plasmonic Nanoprobes for Label‐Free,Quantitative Biomolecular Sensing

Biosensing based on localized surface plasmon resonance (LSPR) relies on concentrating light to a nanometeric spot and leads to a highly enhanced electromagnetic field near the metal nanostructure. Here, a design of plasmonic nanostructures based on rationally structured metal–dielectric combinations is presented, called composite scattering probes (CSPs), to generate an integrated multimodal biosensing platform featuring LSPR and surface‐enhanced Raman spectroscopy (SERS). Specifically, CSP configurations are proposed, which have several prominent resonance peaks enabling higher tunability and sensitivity for self‐referenced multiplexed analyte sensing. Using electron‐beam evaporation and thermal dewetting, large‐area, uniform, and tunable CSPs are fabricated, which are suitable for label‐free LSPR and SERS measurements. The CSP prototypes are used to demonstrate refractive index sensing and molecular analysis using albumin as a model analyte. By using partial least squares on recorded absorption profiles, differentiation of subtle changes in refractive index (as low as 0.001) in the CSP milieu is demonstrated. Additionally, CSPs facilitate complementary untargeted plasmon‐enhanced Raman measurements from the sample's compositional contributors. With further refinement, it is envisioned that the method may lead to a sensitive, versatile, and tunable platform for quantitative concentration determination and molecular fingerprinting, particularly where limited a priori information of the sample is available.     

Polymer-metal complexes,based on poly(itaconic acid ester) derivatives,as catalysts for the decomposition of hydrogen peroxide

Poly(methyl itaconates) and poly(heptyl itaconates), modified with ethylene diamine (EN) and tetraethylene pentamine (TETRAEN) side chains, were complexed with cobalt and copper ions, and their efficiencies as catalysts for the decomposition of hydrogen peroxide were assessed. All the polymer complexes studied were found to be active catalysts, but it was observed that the polymers with TETRAEN side chain, when complexed with CoCl₂ and CuCl₂ were less efficient than polymers with EN side chains which were complexed with trans-dichlorobis(ethylenediamine) cobalt(III) chloride, trans-[Co(EN)₂Cl₂]Cl. One feature of interest was that when the alkyl side chain of the poly itaconate was heptyl the rate of decomposition of hydrogen peroxide was faster than when the alkyl group was methyl.