二垩英与资源回收-Ⅰ考虑到二垩英生成的资源与能量回收基础研究

目前在日本,存在大量工业垃圾,包括各种塑料制品,ASR(汽车破碎垃圾),含有毒PCB(多氯联苯)的110变压器和PVC(聚氯乙稀)制品等.而来自城市垃圾焚烧炉的废气含有大量能量.因此,在充分考虑环境、避免二垩英生成的同时,安全回收来自工业垃圾、城市和/或工业垃圾焚烧炉的资源和能量是个非常重要的课题,这也将对抑制CO2排放作出贡献.正确地阐明焚烧过程中二垩英的生成机理及详细研究含少量二垩英的焚烧废气在冷却过程中大量形成二垩英的临界温度是项很重要的工作.解决这个问题可有效实现资源和能量的回收.本报告介绍日本在二垩英排放方面目前采取的对策和存在的问题以及大阪大学为阻止二垩英生成所做的基础研究工作.     

Thraustochytrid as a potential source of carotenoids

Thraustochytrids, marine protists whose dominant genera are Thraustochytrium and Schizochytrium, belong to the kingdom Chromista and are known as an industrial source of DHA. We describe here that thraustochytrid strain KH105, isolated as a DHA producer, also accumulates significant levels of β-carotene and xanthophylls including canthaxanthin and astaxanthin. A4-d cultivation using a medium composed of 10% glucose and less than 0.3% of nitrogen sources in a half-concentration of seawater gave an astaxanthin production up to 6.1 mg/L, and canthaxanthin content reached more than 10 mg/L under conditions where a higher concentration of nitrogen sources (6%) was employed. It might be advantageous in mass production systems for these carotenoids to be extracted readily by simply suspending the cells with organic solvents such as acetone and chloroform. Analyses on the morphological and life history features of the KH105 strain revealed that it belongs to the genus Schizochytrium. This particular species of thraustochytrids is thus considered to be a promising source of xanthophylls as well as DHA for use in the food industry.     

Phylogenetic analyses of the matrix and non-structural genes of equine influenza viruses

Matrix (M) and nonstructural (NS) genes of thirteen equine H3N8 and H7N7 influenza viruses were sequenced and analyzed from an evolutionary point of view. The M and NS genes of H3N8 viruses isolated between 1989 and 1993 evolved into two minor branch clusters, including isolates from Europe and the American continent, respectively. It was noteworthy to reveal that the nucleotide sequences of the M and NS genes of an earlier American strain showed highest homology to those of recent European viruses. "Frozen evolution" was observed in the M and NS genes of A/eq/LaPlata/1/88. It was also evident that the NS gene of an H7N7 virus from 1977 was very similar to that of a 1979-H3N8 virus, while the M gene was closest phylogenetically to that of the earliest H7N7 virus isolated in 1956. Furthermore, the M2 protein of A/eq/Newmarket/1/77 virus contained a carboxyl terminal deletion of three amino acids. The evolutionary rates of the M and NS genes of H3N8 equine influenza viruses were estimated to be 5.4 x 10(-4) and 5.1 x 10(-4) substitutions per site per year, respectively, which were slower than those of human viruses.     

Development of probe-to-probe approach method for an independently controlled dual-probe scanning tunneling microscope

We developed a method of fast probe-to-probe approach for an independently controlled dual-probe scanning tunneling microscope (STM), which is essential to measure the transport property of nanostructures, without scanning electron microscopy (SEM). In the approach method, inchworm motors are used as the coarse positioning devices, which are controlled with a personal computer. The method enables an automatic approach of the probe to the other probe within a short time (typically 30 min). After the approach, a real distance between contact points of each probe tip to a sample can be measured from the overlapped part of the STM images obtained with individual probe. The approach method without SEM is also useful to measure the charge transport in the atmosphere, which will be essential for measurement of the bio molecules.     

Breakup of non-newtonian emulsion jets

The breakup of non-Newtonian emulsion jets into drops was experimentally studied by ejecting both O/W and W/O emulsions vertically downward into stagnant air through nozzles. Breakup lengths of non-Newtonian emulsion jets were found to be almost equivalent to those of Newtonian jets. Experimental breakup data establish that the static surface tension of the oil phase can be used as the surface tension of W/O emulsion jets, whereas the dynamic surface tension of aqueous surfactant solutions is used as that of O/W emulsion jets. Diameters of drops formed from non-Newtonian emulsion jets are in good agreement with the prediction from the stability theory previously developed by the authors. When the rheological index in a power law model is appreciably smaller than unity and the Ohnesorge number is significantly large, however, drop sizes are larger than the prediction because of the profile relaxation in jets. The critical velocity of emulsion jets, either O/W or W/O emulsion, is significantly lower than that of homogeneous Newtonian jets.     

Effect of inorganic salts,amino acids and proteins on the degradation of pure magnesium in vitro

The possibility of magnesium and its alloys in medical applications is actively investigated in these days for the realization of biodegradable metallic devices. However, the degradation behavior and mechanisms of magnesium and its alloys in physiological environment such as inside the human body have not been elucidated. In this study, we performed 14-d long immersion tests of pure magnesium (3N) in 4 kinds of physiological solutions simulating the body fluids to examine the effects of the chemical components of the body fluids on the degradation of magnesium. The degradation rate of pure magnesium was strongly influenced by the kinds of the solution used. The highest degradation rate was obtained in NaCl, followed by E-MEM, Earle's solution, and E-MEM+FBS. The average degradation rate in NaCl for 8–14 d is about 100 times larger than that in E-MEM+FBS, which is the closest solution to human blood plasma. These results show that protein adsorption and insoluble salt formation retarded magnesium degradation, whereas organic compounds such as amino acids encourage the dissolution of magnesium. Buffering the solution also influenced the degradation rate; buffering NaCl with HEPES increased the degradation rate but buffering with NaHCO₃ decreased it. Based on these results, the use of appropriate solution such as E-MEM+FBS is important for in vitro evaluation of the magnesium degradation rate under the physiological environment simulating inside the human body.     

Fretting fatigue behaviour of Ni-free high-nitrogen stainless steel in a simulated body fluid

Abstract

Fretting fatigue behaviour of Ni-free high-nitrogen steel (HNS) with a yield strength of about 800 MPa, which was prepared by nitrogen gas pressurized electroslag remelting, was studied in air and in phosphate-buffered saline (PBS(-)). For comparison, fretting fatigue behaviour of cold-rolled SUS316L steel (SUS316L(CR)) with similar yield strength was examined. The plain fatigue limit of HNS was slightly lower than that of SUS316L(CR) although the former had a higher tensile strength than the latter. The fretting fatigue limit of HNS was higher than that of SUS316L(CR) both in air and in PBS(-). A decrease in fatigue limit of HNS by fretting was significantly smaller than that of SUS316L(CR) in both environments, indicating that HNS has better fretting fatigue resistance than SUS316L(CR). The decrease in fatigue limit by fretting is discussed taking into account the effect of friction stress due to fretting and the additional influences of wear, tribocorrosion and plastic deformation in the fretted area.     

Model analysis on dispersion characteristics of fine particles in Newtonian molten polymer

In this paper, a model estimating the time-dependent distribution of cluster size consisting of fine particles in Newtonian molten polymer was proposed. The present model for agglomerative suspension was developed based on Usui’s thixotropy model, derived by taking the balance between shear breakup, shear coagulation and Brownian coagulation processes. The analysis was applied to the experimental results for silica/(ethylene methyl-meta acrylate copolymer) suspensions. The time variations of cluster size distributions, of viscosities and of the mean numbers of particles in a cluster were calculated and the results were compared with experimental results for the cases of shear rates from 0.2 to 10 s^?1 when the solid volume fraction was set at 0.15. From the results, it was found that the present model can estimated the steady state values of the slurry viscosity and the mean particle numbers in a cluster as well as Usui’s original model. However, the model could not sufficiently express the time variation of rheological characteristics due to the over-estimation of the contribution of shear rate when the cluster size is small.     

Effect of heat treatment temperature on the microstructure and actuation behavior of a Ti–Ni–Cu thin film microactuator

Ti–Ni–Cu/SiO₂ two layer diaphragm-type microactuators were fabricated by sputter deposition and micromachining. The influence of heat treatment temperature on the actuation behavior was investigated under quasi-static conditions. The interfacial structure of Ti–Ni–Cu/SiO₂ and internal structure of the Ti–Ni–Cu layer were also investigated using transmission electron microscopy. The reaction layer formed between the Ti–Ni–Cu and SiO₂ layers, and preferentially grew into the SiO₂ side. The reaction layer formed at 1023 K mainly consisted of Ti₄(Ni,Cu)₂O. The maximum height of the diaphragm decreased with increasing heat treatment temperature. The growth of the reaction layer also affected the microstructure of the Ti–Ni–Cu layer. The density of fine platelets and Ti₂Ni precipitates decreased with increasing heat treatment temperature from 873 to 923 K, and they disappeared at 973 K due to the fact that the reaction layer mainly consisted of a Ti-rich phase. The microactuator heat treated at 973 K showed the highest transformation temperature with the lowest transformation temperature hysteresis, which is attractive for high speed actuation.     

Purification and characterization of sea squirt alpha-N-acetylgalactosaminidase

Sea squirt alpha-N-acetylgalactosaminidase was purified to homogeneity. Its molecular weight was estimated to be approximately 160,000 by gel filtration and 40,000 by SDS-polyacrylamide gel electrophoresis (SDS-PAGE) under reducing condition. The chromatographic and electrophoretic behaviors indicated that the enzyme was composed of four subunits. The optimum pH of the enzyme reaction was about 4.0 at 37 degrees C, while the enzyme was stable in the range of pH 5.0 to 6.0 during 4 h preincubation at 37 degrees C. Although the enzyme (0.1 unit) was stable at 0 degrees C for 30 min in the presence of 7.5 mM metal ions (Al3+, Ba2+, Ca2+, K+, Mn2+, Pb2+, Sr2+, and Zn2+), almost 40% of the enzyme activity was lost in the presence of Cu2+, Hg2+, monoiodoacetic acid, and EDTA. The enzyme hydrolyzed aryl N-acetyl-alpha-D-galactosaminide as well as GalNAcalpha1(-->4GalNAcalpha1-->)n 4GalNAc-p-aminobenzoic acid ethyl ester (ABEE) (n = 1-4), but GalNAcalpha1-->4GalNAc-ABEE only scarcely. Furthermore, an allergenic pentasaccharitol ABEE derivative, GalNAcalpha1-->2Fucalpha1-->3(GalNAcbeta1-->4) GlcNAcbeta1-->2(3-acetoamido-3-deoxy)L-threose-ABEE, the minimum structural unit for the sea squirt allergenicity was hydrolyzed to 95 mol% for 72 h incubation with the enzyme. The enzyme could be utilized as a powerful tool for the structural analyses of the carbohydrate epitopes of the sea squirt allergen molecules.