Contributions of higher order terms to nonlinear waves in fluid-filled elastic tubes: strongly dispersive case

In the present work, employing the nonlinear equations of an incompressible, isotropic and elastic thin tube and the approximate equations of an incompressible inviscid fluid, and then utilizing the modified reductive perturbation technique presented by us [15] the amplitude modulation of weakly nonlinear waves is examined. It is shown that the first order term in the perturbation expansion is governed by a nonlinear Schrödinger equation and the second order term is governed by the linearized Schrödinger equation with a nonhomogeneous term. In the longwave limit a travelling wave type of solution to these equations are also given.     

Monitoring web services’ quality of service: a literature review

Monitoring Quality of Service (QoS) compliance is an important procedure in web service environment. It determines whether users’ expectations are met, and becomes the vital factor for them to decide whether to continue paying for the service or not. The monitoring is performed by checking the actual services performance against the QoS stated in Service Level Agreement (SLA). In relation to that, the need for monitoring vague QoS specifications in SLA has become more apparent nowadays. This paper reviews the published literature on web services QoS monitoring. A total of 60 selected articles were systematically analyzed. There were 23 of the articles selected through restrictive search criteria while the other 37 were selected based on unrestrictive search criteria. The review shows that little evidence exists on monitoring vague QoS specifications of web services. Providing ability for monitoring QoS that is specified vaguely in SLA could give new insights and implications to web services field. This paper concludes with some recommended future works to construct the theory and perform the empirical research.     

An in situ Raman study of the intercalation of supercapacitor-type electrolyte into microcrystalline graphite

An initial Raman study on the effects of intercalation for aprotic electrolyte-based electrochemical double-layer capacitors (EDLCs) is reported. In situ Raman microscopy is employed in the study of the electrochemical intercalation of tetraethylammonium (Et₄N⁺) and tetrafluoroborate (BF₄⁻) into and out of microcrystalline graphite. During cyclic voltammetry experiments, the insertion of Et₄N⁺ into graphite for the negative electrode occurs at an onset potential of +1.0 V versus Li/Li⁺. For the positive electrode, BF₄⁻ was shown to intercalate above +4.3 V versus Li/Li⁺. The characteristic G-band doublet peak (E_2g2(i) (1578 cm⁻¹) and E_2g2(b) (1600 cm⁻¹)) showed that various staged compounds were formed in both cases and the return of the single G-band (1578 cm⁻¹) demonstrates that intercalation was fully reversible. The disappearance of the D-band (1329 cm⁻¹) in intercalated graphite is also noted and when the intercalant is removed a more intense D-band reappears, indicating possible lattice damage. For cation intercalation, such irreversible changes of the graphite structure are confirmed by scanning electron microscopy (SEM).     

Feature sequencing in the rapid design system using a genetic algorithm

This paper addresses the feature sequencing problem in the Rapid Design System (RDS). The RDS is a feature-based design system that integrates product design and process planning. An important issue in feature-based process planning for machined parts is the order in which material is removed to form the resultant part. The order, or sequence, is partially dependent on the geometric relationships between features. The sequence affects the safety, the time it takes to machine the part, and the quality of the finished part. The sequence of material removal depends on two types of relations between features: (1) intersections and (2) interfeature associations. Both types of relations compound the search for an optimal sequence of material removal. Therefore, the research problem has been the discovery and development of a genetic algorithm (GA) that efficiently searches the solution space for all possible sequences and identifies the best sequences in terms of safety, time and quality.     

Challenges in spent nuclear fuel final disposal： conceptual design models

The disposal of spent nuclear fuel is a long-standing issue in nuclear technology. Mainly, UO2 and metallic U are used as a fuel in nuclear reactors. Spent nuclear fuel contains fission products and transuranium elements, which would remain radioactive for 104 to 108 years. In this brief communication, essential concepts and engineering elements related to high-level nuclear waste disposal are described. Conceptual design models are described and discussed considering the long-time scale activity of spent nuclear fuel or high level waste. Notions of physical and chemical barriers to contain nuclear waste are highlightened. Concerns regarding integrity, self-irradiation induced decomposition and thermal effects of decay heat on the spent nuclear fuel are also discussed. The question of retrievability of spent nuclear fuel after disposal is considered.     

GRAIL: a scalable index for reachability queries in very large graphs

Given a large directed graph, rapidly answering reachability queries between source and target nodes is an important problem. Existing methods for reachability tradeoff indexing time and space versus query time performance. However, the biggest limitation of existing methods is that they do not scale to very large real-world graphs. We present a simple yet scalable reachability index, called GRAIL, that is based on the idea of randomized interval labeling and that can effectively handle very large graphs. Based on an extensive set of experiments, we show that while more sophisticated methods work better on small graphs, GRAIL is the only index that can scale to millions of nodes and edges. GRAIL has linear indexing time and space, and the query time ranges from constant time to being linear in the graph order and size. Our reference C++ implementations are open source and available for download at http://www.code.google.com/p/grail/.     

Recent Applications of Polymer Blends in Gas Separation Membranes

Polymeric membranes are extensively used for gas separations but their performance is limited by the upper bound trade‐off discovered by Robeson in 1991. Among the attractive modifications available to increase the performance of polymeric membranes, polymer blending is a unique technique because it offers a time‐ and cost‐effective method of tuning the properties of membranes. A variety of polymer blends has been explored in recent years. The application of polymer blends in gas separation membranes is described by critically analyzing the performance of polymer blend membranes. Polymer blend membranes of different polymer pairs are reviewed and evaluated in terms of phase behavior, permeability, and selectivity.     

Identification of Ti incorporation into β-SiAlON crystal structure through transmission electron microscopy techniques

In this paper, we report the transmission electron microscopy (TEM) observations on the incorporation of Ti transition metal element into β-SiAlON crystal structure in a bulk β-SiAlON–TiN composite material. Considering our energy dispersive X-ray (EDX) and electron energy loss (EEL) spectroscopy results acquired by using nanometre-scale focused electron probe in scanning transmission electron microscopy (STEM) mode, the Ti-K characteristic X-ray lines and Ti-L_3,2 edges were detected in the chemical composition of the β-SiAlON grains. These results clearly reveal that Ti can enter into the β-SiAlON crystal structure. It is anticipated that this data will provide the new engineering insights on the production of transition metal element doped SiAlON-based materials for different applications.     

反相乳液制备缔合型耐盐聚合物及流变性能评价

摘要：以丙烯酰胺（AM）、2-丙烯酰胺-十二烷基磺酸钠（AMC12S）、疏水单体GTE-10为原料,通过反相乳液聚合法制备了一种缔合型耐盐聚合物p(AM/AMC12S/GTE-10)。通过FTIR、1HNMR、SEM、TEM及激光粒度分析仪对其结构和形貌进行表征,并对其流变性能进行评价。结果表明,疏水单体GTE-10成功引入聚合物中,聚合完成后的乳液粒径分布集中且均一,盐的加入使得p(AM/AMC12S/GTE-10)分子聚集态更紧密,形成的空间网络结构更稳定。质量分数为0.7%的p(AM/AMC12S/GTE-10)聚合物水溶液在140 ℃时表现出较好的耐温性能;在120 ℃,170 s-1条件下剪切1 h,在质量浓度为20000 mg/L的NaCl和CaCl2水溶液中分别配制质量分数0.7%的聚合物溶液,其黏度分别为64.7和54.2 mPa·s;触变性能测试表明,聚合物具有较好的剪切恢复性能;黏弹性测试结果表明,盐水条件下储能模量（G′）>损耗模量（G″）,金属离子与苯氧乙烯基发生络合反应,使分子间作用力增强,形成的空间结构更稳定且难被破坏,黏弹性更高。     

Structural Control of NiO–YSZ/LSCF–YSZ Dual‐Layer Hollow Fiber Membrane for Potential Syngas Production

The objective of this study was to fabricate dual‐layer hollow fiber as a microreactor for potential syngas production via phase inversion‐based co‐extrusion/cosintering process. As the main challenge of phase inversion is the difficulty to obtain defect‐free fiber, this work focuses on the effect of the fabrication parameters, that is, nonsolvent content, sintering temperature and outer‐layer extrusion rate, on the macrostructure of the produced hollow fiber. SEM images confirm that the addition of nonsolvent has successfully minimized the finger‐like formation. At high sintering temperature, more dense hollow fiber was formed while outer‐layer extrusion rate affects the outer layer thickness.