Optimization of Lithium Content and Sintering Aid for Maximized Li+ Conductivity and Density in Ta‐Doped Li7La3Zr2O12

Ta‐doped cubic phase Li₇La₃Zr₂O₁₂ (LLZ) lithium garnet received considerable attention in recent times as prospective electrolyte for all‐solid‐state lithium battery. Although the conductivity has been improved by stabilizing the cubic phase with the Ta⁵⁺ doping for Zr⁴⁺ in LLZ, the density of the pellet was found to be relatively poor with large amount of pores. In addition to the high Li⁺ conductivity, density is also an essential parameter for the successful application of LLZ as solid electrolyte membrane in all‐solid‐state lithium battery. Systematic investigations carried out through this work indicated that the optimal Li concentration of 6.4 (i.e., Li_6.4La₃Zr_1.4Ta_0.6O₁₂) is required to obtain phase pure, relatively dense and high Li⁺ conductive cubic phase in Li_7?xLa₃Zr_2?xTa_xO₁₂ solid solutions. Effort has been also made in this work to enhance the density and Li⁺ conductivity of Li_6.4La₃Zr_1.4Ta_0.6O₁₂ further through the Li₄SiO₄ addition. A maximized room‐temperature (33°C) total (bulk + grain boundary) Li⁺ conductivity of 3.7 × 10^?4 S/cm and maximized relative density of 94% was observed for Li_6.4La₃Zr_1.4Ta_0.6O₁₂ added with 1 wt% of Li₄SiO₄.     

Improved Superorthogonal Codes Through Generalized Rotations

Concatenation of orthogonal space-time block codes (OSTBC) with an outer trellis has led to simple and powerful codes, known as superorthogonal codes or space-time block trellis-coded modulation. In this letter, we generalize these codes by finding new code supersets and corresponding set partitioning, resulting in improved coding gain. We provide design guidelines for the labeling of the generalized code trellises and demonstrate the gains by several example designs for two and four transmit antennas     

Single-block coded modulation for MINO systems

This paper introduces a new class of space-time codes that achieve coding gain without a trellis or any form of inter-block dependency. The construction of the new codes starts from an existing (parent) space-time block code (STBC). Then by increasing the constellation size followed by expurgation of the expanded codebook, a better code is obtained at the original transmission rate. This method can be applied to a wide variety of space-time block codes, including orthogonal codes and quasi-orthogonal codes. A multi-stage design algorithm is presented, and for orthogonal parent codes, an efficient decoding algorithm is developed, and its decoding complexity is analyzed. Despite altering the regular structure of the orthogonal code, the decoding complexity is only affected by a constant factor.     

Optical and photocatalytic properties of the Fe-doped TiO2 nanoparticles loaded on the activated carbon

In this work, Fe-doped (1?wt%) TiO₂ loaded on the activated carbon nano-composite was prepared using a sol-gel method. A prepared nano-composite was characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), BET surface area, Fourier transform infrared spectroscopy (FTIR), photoluminescence (PL) spectroscopy and UV–Vis diffuse reflectance spectroscopy (DRS). The photocatalytic activity of the nano-composite was evaluated through degradation of synthetic textile wastewater, reactive red 198, under visible light irradiations. The XRD result indicated that the TiO₂ nano-composite contained only anatase phase. The surface area of the TiO₂ increased from 48?m²/g to 100?m²/g through the fabrication of the nano-composite. The FE-SEM results indicate that the TiO₂ particles with an average particle size of 35–70?nm can be deposited homogeneously on the activated carbon surface. DRS showed that the Fe doping in the TiO₂ -activated carbon nano-composite induced a significant red shift of the absorption edge and then the band gap energy decreased from 3.3 to 2.9?eV. Photocatalytic results indicated that the photocatalytic activity of the Fe doped TiO₂ increased under visible light irradiation in the presence of the activated carbon.     

Surface topography of polylactic acid nanofibrous mats: influence on blood compatibility

Fabricating nanofibrous scaffolds with robust blood compatibility remains an unmet challenge for cardiovascular applications since anti-thrombogenic surface coatings did not withstand physiological shear force. Hence, the present study envisages the influence of smooth and porous topographies of poly(lactic acid) (PLA) nanofibers on hemocompatibility as it could offer time-independent blood compatibility. Further, recent studies have evolved to integrate various contrasting agents for augmenting the prognostic properties of tissue engineered scaffolds; an attempt was also made to synthesize Curcumin–superparamagnetic iron oxide nanoparticle complex (Cur–SPION) as a contrasting agent and impregnated into PLA nanofibers for evaluating the blood compatibility. Herein, electrospun nanofibers of PLA with different topographies (smooth and porous) were fabricated and characterized for surface morphology, zeta potential, fluorescence, and crystallinity. The scaffolds with smooth, porous and rough surface topographies were thoroughly investigated for its hemocompatibility by evaluating hemolysis percentage, platelet adhesion, in vitro kinetic clotting time, serum protein adsorption, plasma recalcification time (PRT), capture and release of erythrocytes. Although the nanofibers of all three groups showed acceptable hemolytic percentage (HP?<?5%), the adhered RBCs on Cur–SPION based fibers undergo morphological transformation from biconcave discocytes to echinocytes with cube-like protrusions. On the contrary, no morphological changes were observed in RBCs cultured on smooth and porous nanofibers. Porous fibers exhibited excellent anti-thrombogenic property and adhered lesser platelets and maintained the discoidal morphology of native platelets. Cur–SPION integrated PLA nanofibers showed inactivated platelets with anti-thrombogenic activity compared to smooth nanofibers. In conclusion, PLA nanofibers porous topography did not affect the RBC membrane integrity and maintained discoidal morphology of platelets with superior anti-thrombogenic activity. However, smooth and Cur–SPION integrated PLA nanofibers were found to activate the platelets and deform the RBC membrane integrity, respectively. Hence, the nanofibers with porous structures provide an ideal topography for time-independent hemocompatibility.

Open image in new window

     

Fe2MoO4 magnetic nanocomposite modified screen printed graphite electrode as a voltammetric sensor for simultaneous determination of nalbuphine and diclofenac

Journal of Materials Science: Materials in Electronics - This study applied screen printed graphite electrode (SPGE) modified with the Fe2MoO4 magnetic nanocomposite for simultaneously determining...     

Synthesis of alkali and acid-mediated rGO–metakaolin nano composites for supercapacitor application

Journal of Materials Science: Materials in Electronics - Two different samples of metakaolin one hardened by acid (10&nbsp;M phosphoric acid) (MP) and another by alkali (Na2SiO3 of silica...     

Spin-dependent electron transport analysis of benzyl alcohol and p-cresol based single molecular junction: a DFT-NEGF approach

Journal of Materials Science: Materials in Electronics - A single molecular junction can act as spintronic device when a molecule coupled with magnetic electrodes. Various analyses have been done...     

Trimethylation of the R5 Silica-Precipitating Peptide Increases Silica Particle Size by Redirecting Orthosilicate Binding

The unmodified R5 peptide from silaffin in the diatom Cylindrotheca fusiformis rapidly precipitates silica particles from neutral aqueous solutions of orthosilicic acid. A range of post-translational modifications found in R5 contribute toward tailoring silica morphologies in a species-specific manner. We investigated the specific effect of R5 lysine side-chain trimethylation, which adds permanent positive charges, on silica particle formation. Our studies revealed that a doubly trimethylated R5K3,4me3 peptide has reduced maximum activity yet, surprisingly, generates larger silica particles. Molecular dynamics simulations of R5K3,4me3 binding by the precursor orthosilicate anion revealed that orthosilicate preferentially associates with unmodified lysine side-chain amines and the peptide N terminus. Thus, larger silica particles arise from reduced orthosilicate association with trimethylated lysine side chains and their redirection to the N terminus of the R5 peptide.