Scheduling Algorithms for Packet-Oriented MAC Protocols in Wireless Multimedia Systems

Future generation wireless multimediacommunications will require efficient Medium AccessControl (MAC) protocols able to guarantee suitable Qualityof Service (QoS) levels for different traffic classes whileachieving a high utilization of radio resources. This paperproposes a new scheduling technique to be adopted at the MAClevel in wireless access systems, named Dynamic Scheduling-Time DivisionDuplexing (DS-TDD), that efficiently managesvideo, voice, Web and background traffics. A theoretical approachis proposed in this paper to evaluate the DS-TDD performance withvoice and Web traffics. Simulation results have permitted tohighlight the following promising characteristics of the DS-TDDscheme: (i) a high capacity of real-time traffics isattained with a QoS insensitive to Web and background trafficloads; (ii) a high throughput can be guaranteed whilepreserving the QoS levels of the different traffic classes;(iii) heavier downlink traffic loads do not modify the QoSof uplink traffics. Finally, extensive comparisons with differentscheduling schemes proposed in the literature have permitted tohighlight the better performanceof DS-TDD.     

Profiling Voids Embedded in a Slab by a Non-Linear Model

In this paper, by applying a non linear model for the electromagnetic inverse scattering, a technique for the dielectric profiling of a planarly layered medium is investigated and applied to void localization and diagnostics inside a homogeneous lossless slab (one-dimensional geometry). Data are collected under plane wave multifrequency normal incidence. Suitable finite dimensional representations for the unknown functions are introduced and their influence on the model is discussed. The resulting functional equation is solved by the method of weighted residuals and the solution algorithm amounts to minimizing a non quadratic function, where particular attention is devoted to reduce the occurrence of local minima. Finally, the inversion algorithm is validated by applications to both simulated and experimental data.     

RanGen: A Random Network Generator for Activity-on-the-Node Networks

In this paper, we describe RanGen, a random network generator for generating activity-on-the-node networks and accompanying data for different classes of project scheduling problems. The objective is to construct random networks which satisfy preset values of the parameters used to control the hardness of a problem instance. Both parameters which are related to the network topology and resource-related parameters are implemented. The network generator meets the shortcomings of former network generators since it employs a wide range of different parameters which have been shown to serve as possible predictors of the hardness of different project scheduling problems. Some of them have been implemented in former network generators while others have not.     

2,4,6‐Trichlorophenol and phenol removal in methanogenic and partially‐aerated methanogenic conditions in a fluidized bed bioreactor

A fluidized bed bioreactor (FBBR) was operated for more than 575 days to remove 2,4,6‐trichlorophenol (TCP) and phenol (Phe) from a synthetic toxic wastewater containing 80 mg L^?1 of TCP and 20 mg L^?1 of Phe under two regimes: Methanogenic (M) and Partially‐Aerated Methanogenic (PAM). The mesophilic, laboratory‐scale FBBR consisted of a glass column (3 L capacity) loaded with 1 L of 1 mm diameter granular activated carbon colonized by an anaerobic consortium. Sucrose (1 g COD L^?1) was used as co‐substrate in the two conditions. The hydraulic residence time was kept constant at 1 day. Both conditions showed similar TCP and Phe removal (99.9 + %); nevertheless, in the Methanogenic regime, the accumulation of 4‐chlorophenol (4CP) up to 16 mg L^?1 and phenol up to 4 mg L^?1 was observed, whereas in PAM conditions 4CP and other intermediates were not detected. The specific methanogenic activity of biomass decreased from 1.01 ± 0.14 in M conditions to 0.19 ± 0.06 mmolCH₄ h^?1 gTKN^?1 in PAM conditions whereas the specific oxygen uptake rate increased from 0.039 ± 0.008 in M conditions to 0.054 ± 0.012 mmolO₂ h^?1 gTKN^?1, which suggested the co‐existence of both methanogenic archaea and aerobic bacteria in the undefined consortium. The advantage of the PAM condition over the M regime is that it provides for the thorough removal of less‐substituted chlorophenols produced by the reductive dehalogenation of TCP rather than the removal of the parent compound itself. Copyright © 2005 Society of Chemical Industry     

Oscillating superleak transducer of second sound: Amplitude and linewidth

Two oscillating superleak transducers, one serving as generator, the other as detector, of first and second sound, situated at opposite ends of a one-dimensional resonance cavity, are considered. Included in the analysis are the dissipative effects of normal viscous slip and thermal diffusion through the porous membrane. The calculated amplitude and linewidth of the receiver response, both close to and away from the membrane resonance, show good agreement with available experimental data.     

包含热模型的大功率MOSFET新型电路模型

功率转换器的功率密度越来越高，发热问题越来越严重，这种功率转换器的设计对现代大功率半导体技术提出了新的挑战；因而，热问题的优化设计和核实变得比大功率器件的电模型更加重要，本文提出一种新的PSPICE模型，可以利用它计算MOSFET芯片在瞬变过程中的温度。其中的热阻可以从制造商提供的产品使用说明书得到。本文介绍的模型提供发热和电气参数之间的动态关系。它建立了与许可的热环境的关系，例如，栅极驱动电路、负载、以及散热器的分析与优化设计。利用这个模型可以改善散热器的设计。由于决定功率损耗的参数是分布在一定范围内，受生产制造的影响很大，因而散热器的设计往往由于无法预先知道功率损耗而无法进行。     

Targeting optimum resource allocation using reverse problem formulations and property clustering techniques

Decoupling the constitutive equations from the balance and constraint equations allows for reformulating a conventional forward problem into two reverse problems. The first reverse problem is the reverse of a simulation problem, where the process model is solved in terms of the constitutive (synthesis/design) variables instead of the process variables, thus providing the synthesis/design targets. The second reverse problem (reverse property prediction) solves the constitutive equations to identify unit operations, operating conditions and/or products by matching the synthesis/design targets. Visualization of the problem is achieved by employing recently developed property clustering techniques, which allows a high-dimensional problem to be visualized in two or three dimensions. The clusters by definition satisfy intra-stream and inter-stream conservation through linear “mixing” rules, which allows for the development of consistent additive rules along with their ternary representation.     

Deep oxidation of VOC mixtures with platinum supported on Al2O3/Al monoliths

Pt impregnated metallic monoliths prepared from anodised aluminium foils were tested to study their catalytic activity in complete oxidation of volatile organic compound (VOC) mixtures. The VOCs oxidised were 2-propanol, toluene, methyl ethyl ketone (MEK), acetone and their mixtures. Complete oxidation was obtained in all cases except for the case of 2-propanol, where acetone was found as an oxidation intermediate. Even if the adsorption of the VOC on the Al₂O₃ is governed by its polarity, the reactivity is mainly affected by the competition of the oxygen atoms chemisorbed on the Pt particles.     

Automated model generation for performance engineering of building automation networks

Large technical systems need to be designed both reliable and efficient. Specialized design tools offer therefore a simplified, abstract design and extend details autonomously in the background. Analytic and simulation based models could improve the quality by testing and dimensioning the design before implementation, but setting up the necessary models is time-consuming and expensive. Therefore many developers ask for analysis tools which are able to create their models from the available information in the design tools. This paper presents such an automated modeling approach basing on an existing design database at the example of a network analysis for building automation fieldbuses. The process of automated modeling is unfolded, and the potentials and limitations are discussed.