Use of recycled copper slag for blended cements

Copper slag is a by‐product generated during smelting to extract copper metal from the ore. The copper slag obtained may exhibit pozzolanic activity and may therefore be used in the manufacture of addition‐containing cements. In this paper the effect of the incorporation of the copper slag in cement is measured. Blends of copper slag with Portland cement generally possess properties equivalent to Portland cement containing fly ash, but very different to the silica fume incorporation. Copper slag and fly ash reduce the heat of hydration more effectively than silica fume in mortars. The replacement of 30% cement by copper slag reduces the flexural and compressive strength in a similar way to fly ash; however, after 28 days, the reduction is less than the percentage of substitution. Hydrated calcium aluminate phases were analysed using scanning electron microscopy (SEM) and X‐ray diffraction (XRD) techniques. The pozzolanic activity of copper slag is similar to that of fly ash and higher than silica fume. In the presence of low water/cement ratios, certain pozzolanic materials produce a very compact cement paste that limits the space available for hydration products, a determining factor in the formation of hydrated calcium aluminates. SEM was found to be a useful analytical technique when aluminates are formed and can be clearly detected by XRD. Copyright © 2008 Society of Chemical Industry     

Ventilatory response to severe acute hypoxia in guinea-pigs and rats with high hemoglobin-oxygen affinity induced by cyanate

Laparoscopic pelvic lymph node dissection has been applied as a minimally invasive staging technique for men with prostate cancer. This procedure has been shown to shorten markedly postoperative hospitalization, decrease analgesic requirements and shorten convalescence period compared to open pelvic node dissection. However, the laparoscopic procedure takes longer to perform and many disposable instruments are used, thus increasing the cost. We determine the overall cost of laparoscopic versus open pelvic lymph node dissection. Between January 1989 and April 1992, 61 men underwent only staging pelvic lymph node dissection for cancer of the prostate at a single university teaching hospital. Of these patients 11 and 50 underwent open and laparoscopic pelvic lymph node dissection, respectively. Information from the hospital business office was reorganized into preoperative, intraoperative and postoperative expenses. All individual charges were transformed up or down to the dollar amounts of the 1990 to 1991 fiscal year so as to correct for inflationary changes. Preoperative costs were not significantly different between the 2 operative approaches. Intraoperative expenses were 52% greater if laparoscopic pelvic lymph node dissection was performed and can be explained by the longer operative times and use of disposable instrumentation. However, the postoperative period lasted an average of 1.61 days following laparoscopic pelvic lymph node dissection. Postoperative nursing and analgesic requirements were significantly more for patients undergoing open pelvic lymph node dissection. The overall postoperative costs following open pelvic lymph node dissection were 280% more expensive than for the laparoscopic procedure. The overall total costs were approximately $1,250 more for laparoscopic pelvic lymph node dissection. Wages lost or earned during this period and rapid return to normal activity following laparoscopic pelvic lymph node dissection would, in our opinion, justify this additional cost.     

A finite difference BPM analysis of bent dielectric waveguides

A new version of the scalar TE wave equation is introduced, one that is particularly useful in bent waveguide analysis. The slowly varying envelope equation in cylindrical coordinates for the field amplitude E is finite-differenced, with no other approximations made to it. It will be shown that this version of the equation has several advantages over other forms and gives good results for the power loss rates even at radii ⩽100 μm, as well as being useful for the study of curved structures with varying radii of curvature. Evidence is provided to show that the loss rates calculated from this equation using the two dimensional finite difference beam propagation method compare favorably with other numerical and analytical results found in the literature. Special care must be taken when applying transparent boundary conditions as the curvature increases     

Single stage and double absorption heat transformers used to recover energy in a distillation column of butane and pentane

This paper presents the theoretical analysis of the use of single stage and double absorption heat transformers operating with the water–lithium bromide mixture coupled to a butane and pentane distillation column in a Mexican refinery. A mathematical model of the heat transformers was developed in FORTRAN and integrated as a user model to the Aspen Plus simulation code. Both components coupled to the column were modelled on steady-state conditions. The results show that it is theoretically possible to reduce the energy consumed in the reboiler between 26 and 43% by the use of single stage heat transformer at specific conditions, and between 28 and 33% with double absorption heat transformers for a wide range of operating conditions. Copyright © 2003 John Wiley & Sons, Ltd.     

Cpk index estimation using data transformation

Process capability indices (PCIs) are used in industry to assess percentages of nonconforming parts. An underlying assumption is that the output process measurements are distributed as normal random variables. When normal distributions are assumed, but different distributions are present - such as skew, heavy-tailed, and short-tailed distributions - the percentages of nonconforming parts are significantly different than the computed PCIs indicate. Data arising from nonnormal distributions can sometimes be transformed to conform to the normality assumption and the PCI's computed for the transformed data. In this paper, the effect of the transformation on the estimate of nonconforming parts is examined for three examples of nonnormal distributions - gamma, lognormal, and Weibull. The results of this experimental analysis suggest that data transformation can be useful for estimating an interval for C_pk values and the number of nonconforming parts.     

Change detection by probabilistic segmentation from monocular view

We present a method for foreground/background video segmentation (change detection) in real-time that can be used, in applications such as background subtraction or analysis of surveillance cameras. Our approach implements a probabilistic segmentation based on the Quadratic Markov Measure Field models. This framework regularizes the likelihood of each pixel belonging to each one of the classes (background or foreground). We propose a new likelihood that takes into account two cases: the first one is when the background is static and the foreground might be static or moving (Static Background Subtraction), the second one is when the background is unstable and the foreground is moving (Unstable Background Subtraction). Moreover, our likelihood is robust to illumination changes, cast shadows and camouflage situations. We implement a parallel version of our algorithm in CUDA using a NVIDIA Graphics Processing Unit in order to fulfill real-time execution requirements.     

Energieinformatik

Due to the increasing importance of producing and consuming energy more sustainably, Energy Informatics (EI) has evolved into a thriving research area within the CS/IS community. The article attempts to characterize this young and highly dynamic field of research by describing current EI research topics and methods and provides an outlook of how the field might evolve in the future. It is shown that two general research questions have received the most attention so far and are likely to dominate the EI research agenda in the coming years: How to leverage information and communication technology (ICT) to (1) improve energy efficiency, and (2) to integrate decentralized renewable energy sources into the power grid. Selected EI streams are reviewed, highlighting how the respective research questions are broken down into specific research projects and how EI researchers have made contributions based on their individual academic background.     

Characterization and tests of planar Co3O4 model catalysts prepared by chemical vapor deposition

The chemical vapor deposition method was used to deposit thin films of cobalt oxide starting with cobalt (II) acetylacetonate and oxygen. The deposition process was investigated and the obtained films were identified as a cubic spinel-type polycrystalline Co₃O₄ with a crystallite size of 30–40 nm. The coating was carbon-free and the surface oxygen concentration was measured to be 66 at.% with AES analysis. Smooth and highly uniform thin films were deposited on planar stainless steel substrates and subjected to TPR and catalysis tests that show positive correlation. The apparent activation energy of Co₃O₄ reduction to CoO was measured to be (33±5) kJ/mol. The catalytic activity of Co₃O₄ was investigated toward the conversion of both propane and ethanol to carbon dioxide. Though the catalytic action was registered at the same temperature, the deactivation process was seen to be different. The catalytic conversion of ethanol induces a fast deactivation process, which was linked to its high ability to reduce Co₃O₄.     

Barocalorimetric technique for monitoring pressurized copolymer reactors

The problem of on‐line estimation of the conversion and composition evolutions in a pressurized batch copolymer reactor with temperature and pressure measurements was addressed. The estimation model consisted of mass and energy balances with a pressure equation built from phase‐equilibrium considerations. The application of a nonlinear geometric estimation approach yielded the underlying solvability condition with physical meaning, a straightforward estimator construction, and a conventional‐like tuning procedure. The resulting barocalorimetric estimator was an on‐line dynamic measurement processor with a model‐based predictor and a measurement‐driven corrector, and whose implementation did not require the polymerization rates and heat‐transfer coefficient function dependencies. The technique was tested with a representative laboratory styrene–butadiene system. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 475–482, 2005     

A change management framework for macroergonomic field research

With the proliferation of macroergonomic field research, it is time to carefully examine how such research should be managed and implemented. We argue that the importance of attending to high-quality implementation of field research is equal to that of methodological rigor. One way to systematically manage the implementation process is to adopt a change management framework, wherein the research project is conceptualized as an instance of organization-level change. Consequently, principles for successful organization-level change from the literature on change management can be used to guide successful field research implementation. This paper briefly reviews that literature, deriving 30 principles of successful change management, covering topics such as political awareness, assembling the change team, generating buy-in, and management support. For each principle, corresponding suggestions for macroergonomic field research practice are presented. We urge other researchers to further develop and adopt frameworks that guide the implementation of field research.