Self-aligning planarization and passivation for integration applications in III-V semiconductor devices

This work reports an easy planarization and passivation approach for the integration of III-V semiconductor devices. Vertically etched III-V semiconductor devices typically require sidewall passivation to suppress leakage currents and planarization of the passivation material for metal interconnection and device integration. It is, however, challenging to planarize all devices at once. This technique offers wafer-scale passivation and planarization that is automatically leveled to the device top in the 1-3-/spl mu/m vicinity surrounding each device. In this method, a dielectric hard mask is used to define the device area. An undercut structure is intentionally created below the hard mask, which is retained during the subsequent polymer spinning and anisotropic polymer etch back. The spin-on polymer that fills in the undercut seals the sidewalls for all the devices across the wafer. After the polymer etch back, the dielectric mask is removed leaving the polymer surrounding each device level with its device top to atomic scale flatness. This integration method is robust and is insensitive to spin-on polymer thickness, polymer etch nonuniformity, and device height difference. It prevents the polymer under the hard mask from etch-induced damage and creates a polymer-free device surface for metallization upon removal of the dielectric mask. We applied this integration technique in fabricating an InP-based photonic switch that consists of a mesa photodiode and a quantum-well waveguide modulator using benzocyclobutene (BCB) polymer. We demonstrated functional integrated photonic switches with high process yield of >90%, high breakdown voltage of >25 V, and low ohmic contact resistance of /spl sim/10 /spl Omega/. To the best of our knowledge, such an integration of a surface-normal photodiode and a lumped electroabsorption modulator with the use of BCB is the first to be implemented on a single substrate.     

Studying Fluid Characteristics Atop Surface Patterned Membranes via Particle Image Velocimetry

Surface patterning is a recent promising approach to promote performance of pressure-driven membranes in water treatment and desalination. Nevertheless, knowledge about foulant deposition mechanisms, especially at early stage of filtration, is still lacking. The applicability of particle imaging velocimetry to study fluid characteristics atop surface patterned thin-film composite membranes was investigated at different operating conditions. This work is an important first step toward reliable understanding of the impacts of topographical membrane surface modification on hydrodynamic conditions and foulant deposition mechanisms.     

Optimized Machine Learning Algorithms for Investigating the Relationship Between Economic Development and Human Capital

Computational Economics - In Economic Development, human capital was previously seen as production factors but gradually evolved into endogenous growth theories. Most of the previous studies have...     

Revealing determinants of two‐phase dynamics of P53 network under gamma irradiation based on a reduced 2D relaxation oscillator model

This study proposes a two‐dimensional (2D) oscillator model of p53 network, which is derived via reducing the multidimensional two‐phase dynamics model into a model of ataxia telangiectasia mutated (ATM) and Wip1 variables, and studies the impact of p53‐regulators on cell fate decision. First, the authors identify a 6D core oscillator module, then reduce this module into a 2D oscillator model while preserving the qualitative behaviours. The introduced 2D model is shown to be an excitable relaxation oscillator. This oscillator provides a mechanism that leads diverse modes underpinning cell fate, each corresponding to a cell state. To investigate the effects of p53 inhibitors and the intrinsic time delay of Wip1 on the characteristics of oscillations, they introduce also a delay differential equation version of the 2D oscillator. They observe that the suppression of p53 inhibitors decreases the amplitudes of p53 oscillation, though the suppression increases the sustained level of p53. They identify Wip1 and P53DINP1 as possible targets for cancer therapies considering their impact on the oscillator, supported by biological findings. They model some mutations as critical changes of the phase space characteristics. Possible cancer therapeutic strategies are then proposed for preventing these mutations’ effects using the phase space approach.Inspec keywords: physiological models, cellular biophysics, cancer, difference equations, delays, enzymes, biochemistry, molecular biophysics, gamma‐rays, radiation therapyOther keywords: two‐phase dynamics model, P53 network, gamma irradiation, 2D relaxation oscillator model, ATM model, Wip1 variables, p53‐regulators, cell fate decision, excitable relaxation oscillator, Wip1 time delay, state‐dependent delay differential equation, cell cycle arrest, cell apoptosis, cancer therapies, Wip1 overexpression, Wip1 downregulation, ATM deficiency, Mdm2 overexpression, Mdm2 downregulation, mutation effects, phase space approach     

Multiobjective evolutionary clustering of Web user sessions: a case study in Web page recommendation

In this study, we experiment with several multiobjective evolutionary algorithms to determine a suitable approach for clustering Web user sessions, which consist of sequences of Web pages visited by the users. Our experimental results show that the multiobjective evolutionary algorithm-based approaches are successful for sequence clustering. We look at a commonly used cluster validity index to verify our findings. The results for this index indicate that the clustering solutions are of high quality. As a case study, the obtained clusters are then used in a Web recommender system for representing usage patterns. As a result of the experiments, we see that these approaches can successfully be applied for generating clustering solutions that lead to a high recommendation accuracy in the recommender model we used in this paper.     

Experiments and simulations of short-pulse laser-pumped extreme ultraviolet lasers

Recent experimental work on the development of extreme ultraviolet lasers undertaken using as the pumping source the VULCAN laser at the Rutherford Appleton Laboratory is compared to detailed simulations. It is shown that short duration (/spl sim/picosecond) pumping can produce X-ray laser pulses of a few picosecond duration and that measurement of the emission from the plasma can give an estimate of the duration of the gain coefficient. The Ehybrid fluid and atomic physics code developed at the University of York is used to simulate X-ray laser gain and plasma emission. Two postprocessors to the Ehybrid code are utilized: 1) to raytrace the X-ray laser beam amplification and refraction and 2) to calculate the radiation emission in the kiloelectronvolt photon energy range. The raytracing and spectral simulations are compared, respectively, to measured X-ray laser output and the output of two diagnostics recording transverse X-ray emission. The pumping laser energy absorbed in the plasma is examined by comparing the simulations to experimental results. It is shown that at high pumping irradiance (>10/sup 15/ Wcm/sup -2/), fast electrons are produced by parametric processes in the preformed long scalelength plasmas. These fast electrons do not pump the population inversion and so pumping efficiency is reduced at high irradiance.     

Determination of Antioxidant Properties of Fruit Juice by Partial Least Squares and Principal Component Regression

The multivariate calibration methods—principal component regression and partial least squares—were employed for the prediction of antioxidant capacities of fruit juices. High-performance liquid chromatography and spectrophotometric approaches were used to determine the antioxidant capacities of fruit juices. The importance of calibration design was investigated by calculating the prediction and validation errors. The influences of using independent validation sets were emphasized. Calibration design is shown to have major effect on principal component regression and partial least squares errors. The models developed on the basis of the mean-centered data were able to predict the total antioxidant activity with a precision comparable to that of the reference [2,2-azino-di-(3-ethylbenzothialozine-sulfonic acid)] method. The partial least squares model seems preferable because of its predictive and describing abilities and good interpretability of the contribution of compounds to the antioxidant capacity. The contribution of individual phenolic compounds to the antioxidant capacity was identified by high-performance liquid chromatography.     

Utilization of Electrospun Polystyrene Membranes as a Preliminary Step for Rapid Diagnosis

Recent advances in clinical practice drive deoxyribonucleic acid (DNA) as an important class of biomarker. Monitoring the change in their concentration suggests the initiation and/or progression of various disorders. However, low quantity of DNA biomarkers in body fluids requires a delicate isolation methodology that provides efficient separation and easy handling. This study describes a newer‐generation separation technology relying on electrospun fibers of sub‐micrometer diameter of a commodity polymer for DNA biomarkers in simulative serum. Fibrous polystyrene membranes are prepared by electrospinning and they are subjected to post‐modification with Au. The composite membranes may provide a convenient environment for the removal of bovine serum albumin (BSA) from BSA and DNA mixtures. The eluent can be used as an efficient tool for detection of DNA biomarkers associated with diagnosis of numerous life‐threatening diseases.

     

Degradation kinetics of PVC plasticized with different plasticizers under isothermal conditions

The aim of the present work is to elucidate the degradation kinetics of polyvinyl chloride (PVC) plasticized with some phthalate and nonphthalate plasticizers. A PVC thermomat instrument was utilized to maintain the isothermal degradation conditions at 140 and 160°C, and to suppress the oxidative degradation by means of nitrogen flow. The conductivity measurements were performed to follow hydrogen chloride (HCl) gas which is released upon PVC degradation and trapped in water. Dehydrochlorination of plasticized PVC films occurred with activation energies of about 23–160 and 26–117 kJ mol^?1 and the isokinetic temperatures, at which the dehydrochlorination rate constants of all p‐PVC films would have the same value, were found to be 171 and 128°C for initial and linear regions of dehydrochlorination curve, respectively. Plasticizer incorporation contributes to the stability of the films particularly after the consumption of stabilizer due to the dehydrochlorination. Influence of temperature rise by 20°C on the degradation rate constant is the lowest for DINCH having p‐PVC films as 0.36 and 0.42% increment at the initial region and linear region, respectively. On the other hand, DOTP reveals greater stability than the others do since the compensation ratio of the PVC film having DOTP is greater than the other films. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41579.     

Microbial reductive transformation of pentachloronitrobenzene under methanogenic conditions

The reductive transformation of pentachloronitrobenzene (PCNB), an organochlorine fungicide, was investigated with a mixed, methanogenic culture developed from a contaminated estuarine sediment. Batch assays performed with this enrichment culture resulted in the biotransformation of PCNB to pentachloroaniline (PCA), which was then sequentially dechlorinated as follows: PCA --> 2,3,4,5- and 2,3,5,6-tetrachloroaniline (TeCA) --> 2,4,5- and 2,3,5-trichloroaniline (TrCA) --> 2,4-, 2,5-, and 3,5-dichloroaniline (DCA) --> 3- and 4-chloroaniline (CA) (low levels). Glucose fermentation, methanogenesis, and dechlorination were not inhibited at an initial PCNB concentration up to 40 microM, which is 27 times higher than its aqueous solubility. The addition of 25 mM 2-bromoethanesulfonate (BES) to the PCNB-amended culture resulted in the complete inhibition of methanogenesis, but the biotransformation of PCNB to PCA and its sequential dechlorination pathway were not affected. The addition of sodium azide (200 mg/L) to the PCNB-amended culture resulted in complete inhibition of methanogenesis, but did not inhibit the transformation of PCNB to PCA; however, PCA dechlorination was not observed. PCNB was also abiotically transformed to PCA in autoclaved culture media but at much lower rates as compared to the biotic assays. In contrast, the rate of PCNB to PCA transformation in autoclaved culture controls was similar to the rates observed in the azide-amended culture and the active enrichment culture, indicating that biotically derived reductants facilitated the observed transformation of PCNB to PCA. Dechlorination of PCA was not observed in any of the abiotic controls. These findings have significant environmental implications in terms of the fate and transport of PCNB, PCA, and its dechlorination products in subsurface systems.