Fetal Neurobehavioral Development: A Tale of Two Cities.

Longitudinal neurobehavioral development was examined in 237 fetuses of low-risk pregnancies from 2 distinct populations-Baltimore, Maryland, and Lima. Peru-at 20. 24. 28. 32, 36. and 38 weeks gestation. Data were based on digitized Doppler-based fetal heart rate (FHR) and fetal movement (FM). In both groups. FHR declined while variability, episodic accelerations, and FM-FHR coupling increased, with discontinuities evident between 28 and 32 weeks gestation. Fetuses in Lima had higher FHR and lower variability, accelerations, and FM-FHR coupling. Declines in trajectories were typically observed 1 month sooner in Lima, which magnified these disparities. Motor activity differences were less consistent. No sex differences in fetal neurobehaviors were detected. It is concluded that population factors can influence the developmental niche of the fetus. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Partial or total silylation of dextran with hexamethyldisilazane

The silylation reaction of dextran with 1,1,1,3,3,3-hexamethyldisilazane (HMDS) in DMSO was studied as the first step of the synthesis of new amphiphilic polyester-grafted dextrans. According to the experimental conditions, i.e. dextran molar weight, medium temperature and reaction time, HMDS/OH ratio, addition of a catalyst and co-solvent, partially or totally silylated dextrans were recovered. The highest silylation yields were obtained with the lowest molecular weight dextrans. The increase in temperature medium and/or reaction time, the presence of catalyst or co-solvent favored the protection yield. Whatever the dextran used, complete silylation of the polysaccharide chain could be achieved by adequate selection of the experimental conditions. The thermal properties of resulting silylated polysaccharides were investigated by temperature modulated DSC. It was observed that T_g values of partially silylated dextran were maintained between 120 and 140 °C, independently of the dextran molecular weight. Interestingly, DMSO proved to behave as an efficient plasticizer of (partially) silylated dextrans. The partially silylated dextrans were efficiently used as multifunctional macroinitiators for the controlled ring-opening polymerization (ROP) of lactone. The ROP was then promoted from the remaining hydroxyl groups in the presence of tin or aluminium activator. After polymerization and ultimate deprotection of the silylated dextran backbone, amphiphilic polyester-grafted dextrans were readily recovered.     

Generalized modal satisfiability

It is well known that modal satisfiability is PSPACE-complete (Ladner (1977) [21]). However, the complexity may decrease if we restrict the set of propositional operators used. Note that there exist an infinite number of propositional operators, since a propositional operator is simply a Boolean function. We completely classify the complexity of modal satisfiability for every finite set of propositional operators, i.e., in contrast to previous work, we classify an infinite number of problems. We show that, depending on the set of propositional operators, modal satisfiability is PSPACE-complete, coNP-complete, or in P. We obtain this trichotomy not only for modal formulas, but also for their more succinct representation using modal circuits. We consider both the uni-modal and the multi-modal cases, and study the dual problem of validity as well.     

Food vacuole proteome of the malarial parasite Plasmodium falciparum

The Plasmodium falciparum food vacuole (FV) is a lysosome-like organelle where erythrocyte hemoglobin digestion occurs. It is a favorite target in the development of antimalarials. We have used a tandem mass spectrometry approach to investigate the proteome of an FV-enriched fraction and identified 116 proteins. The electron microscopy analysis and the Western blot data showed that the major component of the fraction was the FV and, as expected, the majority of previously known FV markers were recovered. Of particular interest, several proteins involved in vesicle-mediated trafficking were identified, which are likely to play a key role in FV biogenesis and/or FV protein trafficking. Recovery of parasite surface proteins lends support to the cytostomal pathway of hemoglobin ingestion as a FV trafficking route. We have identified 32 proteins described as hypothetical in the databases. This insight into FV protein content provides new clues towards understanding the biological function of this organelle in P. falciparum.     

3D numerical simulation of the behaviour of a spherical particle suspended in a Newtonian fluid and submitted to a simple shear

The 3D flow around a rigid spherical particle suspended in a Newtonian fluid and submitted to simple shear is numerically studied using Rem3D^® finite element code. The sphere motion is imposed by a sticking contact between the sphere and the fluid. The effect of the particle size as compared with the finite dimension of the shear cell was investigated. The direct calculations show that 3D modelling is necessary to correctly predict the sphere behaviour. The proximity of the particle and the cell walls strongly affects the flow velocities, the sphere motion (increase of the rotation period of the sphere) and the stress field (change of orientation angle and increase of maximal local stresses).     

Oil Spill Dispersant Effectiveness Protocol. I: Impact of Operational Variables

The current U.S. Environmental Protection Agency protocol for testing the effectiveness of dispersants, the swirling flask test, has been found to give widely varying results in the hands of different testing laboratories. The sources of the ambiguities in the test were determined by considering several options in a rigorous systematic fashion. Options considered were variability among three operators and the variability and limitations of three analytical instruments in establishing a calibration curve for oil/dispersant mixtures. Other options included flask type, impact of operational variables (rotational speed, mixing time, settling time, and oil:dispersant ratio), development of a revised procedure for dispersant effectiveness, reproducibility and repeatability of the revised procedure, and development of selection criteria for screening of dispersants. A redesign of the test flask, which is characterized by having baffles with a stopcock at the bottom for sample collection, was deemed necessary to accomplish reproducibility within operator and between operators. The results indicated that the baffled flask provided a total coefficient of variation (variations within operator and between operators) less than 11% compared to above 100% in some cases for the swirling flask.     

Oil Spill Dispersant Effectiveness Protocol. II: Performance of Revised Protocol

The current U.S. Environmental Protection Agency (EPA) protocol for testing the effectiveness of dispersants for use in treating oil spills on the open water, the swirling flask test (SFT), has been found to give widely varying results in the hands of different testing laboratories. Part I addressed the sources of the ambiguities in the EPA SFT and the development of a new test referred to as the baffled flask test (BFT). In this part of the series, further experiments were conducted for estimating the repeatability of three operators in determining the effectiveness of 18 dispersants by both the EPA SFT and the BFT methods. Overall statistical analysis of the results indicated that the coefficient of variation by the BFT was only 7.8% compared to 21.9% for the EPA SFT. The mean percent effectiveness of the EPA SFT was only 19.7% as compared to 64.6% for the BFT. Proposed selection criteria for screening of dispersants for listing on the National Contingency Plan Product Schedule have been developed.     

Isomorphic Implication

We study the isomorphic implication problem for Boolean constraints. We show that this is a natural analog of the subgraph isomorphism problem. We prove that, depending on the set of constraints, this problem is in P, or is NP-complete, or is NP-hard, coNP-hard, and in P_‖^NP. We show how to extend the NP-hardness and coNP-hardness to P_‖^NP-hardness for some cases, and conjecture that this can be done in all cases. Supported in part by grants NSF-CCR-0311021 and DFG VO 630/5-1 and VO 630/5-2. An extended abstract of this paper appears in Proceedings of the 30th International Symposium on Mathematical Foundations of Computer Science (MFCS 2005), pp. 119–130, Springer-Verlag Lecture Notes in Computer Science #3618, August 2005. Work of M. Bauland done in part while visiting CASCI’s Laboratory for Complexity at Rochester Institute of Technology. Work of E. Hemaspaandra done in part while on sabbatical at the University of Rochester.     

Influence of Process Parameters on the Morphology of Spray‐Dried BaCl2 Powders

Spray‐drying is an effective method for producing powder aggregates with controlled size and morphology. Here, we report on a systematic study aimed at determining how spray‐drying parameters such as nozzle temperature, gas flow, salt concentration and solution feed rate, influence the characteristics of BaCl₂ granules prepared from aqueous solutions. We correlate the granule characteristics to these conditions through the use of processing maps and modeling. It is found that well‐dispersed, high density and spherical aggregates, which are favorable for subsequent powder compaction and sintering, can be obtained within a limited range of processing conditions.