Silver dissolution on copper-based alloys

Electrical resistivity measurements and scanning electron microscopy was used to study the dissolution of silver on Cu-Ag and Cu-Al-Ag alloys. The results seem to indicate that the dissolution temperature is affected by the addition of aluminium.     

Characterisation of mortar morphology in thin sections by digital image processing

A digital imaging approach was applied to investigate mortar morphology in thin sections; in particular, the binder/aggregate ratio and the grading curve of five mortar bars were attained by digital image processing (DIP), using the Image Pro Plus 4.1 software package. The imaging procedure employed image segmentation, to extract mortar aggregate, and image filtering, to fix grain boundaries. The results show that digital image processing may be considered as an alternative method to mechanical sieving for the characterisation of mortar morphology, as it appears to be quicker and more accurate than the traditional method. However, digital image processing exhibits limits, which are discussed in the text.     

Charakterisierung und Störstoffanalyse von rückgewonnenen Stoffströmen aus Wärmedämmverbundsystemen

Due to the growing energy requirements, the proportion of external thermal insulation composite systems (ETICS) installed has increased significantly during the past 50 years. Due to the longevity of these systems, ETICS waste is currently accumulating. Owing to the complex construction as well as a multitude of differently installed materials and substances of the past generations, there are many uncertainties and problems with the clean and low-pollutant processing of such systems. In the frame of this work, the ETICS were processed and sorted before being screened for ingredients or pollutants as well as for the purity of the recovered material fractions.     

Indirect Exciton–Phonon Dynamics in MoS2 Revealed by Ultrafast Electron Diffraction

Transition metal dichalcogenides layered nano-crystals are emerging as promising candidates for next-generation optoelectronic and quantum devices. In such systems, the interaction between excitonic states and atomic vibrations is crucial for many fundamental properties, such as carrier mobilities, quantum coherence loss, and heat dissipation. In particular, to fully exploit their valley-selective excitations, one has to understand the many-body exciton physics of zone-edge states. So far, theoretical and experimental studies have mainly focused on the exciton–phonon dynamics in high-energy direct excitons involving zone-center phonons. Here, ultrafast electron diffraction and ab initio calculations are used to investigate the many-body structural dynamics following nearly- resonant excitation of low-energy indirect excitons in MoS₂. By exploiting the large momentum carried by scattered electrons, the excitation of in-plane K- and Q- phonon modes are identified with 𝑬^′ symmetry as key for the stabilization of indirect excitons generated via near-infrared light at 1.55 eV, and light is shed on the role of phonon anharmonicity and the ensuing structural evolution of the MoS₂ crystal lattice. The results highlight the strong selectivity of phononic excitations directly associated with the specific indirect- exciton nature of the wavelength-dependent electronic transitions triggered in the system.     

Influence of temperature on the liver circadian clock in the ruin lizard Podarcis sicula

Reptiles represent an interesting animal model to investigate the influence of temperature on molecular circadian clocks. The ruin lizard Podarcis sicula lives in a continental climate and it is subjected to wide range of environmental temperatures during the course of the year. As consequence, ruin lizard daily activity pattern includes either the hibernation or periods of inactivity determined by hypothermia. Here we showed the rhythmic expression of two clock genes, lPer2 and lClock, in the liver of active lizards exposed to summer photo-thermoperiodic conditions. Interestingly, the exposition of lizards to hypothermic conditions, typical of winter season, induced a strong dampening of clock genes mRNA rhythmicity with a coincident decrease of levels. We also examined the qualitative and quantitative distribution of lPER2 and lCLOCK protein in different cellular compartments during the 24-h cycle. In the liver of active lizards both proteins showed a rhythmic expression profile in all cellular compartments. After 3 days at 6 degrees C, some temporal fluctuations of the lCLOCK and lPER2 are still detectable, although, with some marked modifications in respect to the values detected in the liver of active lizards. Besides demonstrating the influence of low temperature on the lizard liver circadian oscillators, present results could provide new essential information for comparative studies on the influence of temperature on the circadian system across vertebrate classes.     

First Report on Genome Editing via Ribonucleoprotein (RNP) in Castanea sativa Mill.

Castanea sativa is an important tree nut species worldwide, highly appreciated for its multifunctional role, in particular for timber and nut production. Nowadays, new strategies are needed to achieve plant resilience to diseases, climate change, higher yields, and nutritional quality. Among the new plant breeding techniques (NPBTs), the CRISPR/Cas9 system represents a powerful tool to improve plant breeding in a short time and inexpensive way. In addition, the CRISPR/Cas9 construct can be delivered into the cells in the form of ribonucleoproteins (RNPs), avoiding the integration of exogenous DNA (GMO-free) through protoplast technology that represents an interesting material for gene editing thanks to the highly permeable membrane to DNA. In the present study, we developed the first protoplast isolation protocol starting from European chestnut somatic embryos. The enzyme solution optimized for cell wall digestion contained 1% cellulase Onozuka R-10 and 0.5% macerozyme R-10. After incubation for 4 h at 25 °C in dark conditions, a yield of 4,500,000 protoplasts/mL was obtained (91% viable). The transfection capacity was evaluated using the GFP marker gene, and the percentage of transfected protoplasts was 51%, 72 h after the transfection event. The direct delivery of the purified RNP was then performed targeting the phytoene desaturase gene. Results revealed the expected target modification by the CRISPR/Cas9 RNP and the efficient protoplast editing.     

Fighting the Huntington’s Disease with a G-Quadruplex-Forming Aptamer Specifically Binding to Mutant Huntingtin Protein: Biophysical Characterization,In Vitro and In Vivo Studies

A set of guanine-rich aptamers able to preferentially recognize full-length huntingtin with an expanded polyglutamine tract has been recently identified, showing high efficacy in modulating the functions of the mutated protein in a variety of cell experiments. We here report a detailed biophysical characterization of the best aptamer in the series, named MS3, proved to adopt a stable, parallel G-quadruplex structure and show high nuclease resistance in serum. Confocal microscopy experiments on HeLa and SH-SY5Y cells, as models of non-neuronal and neuronal cells, respectively, showed a rapid, dose-dependent uptake of fluorescein-labelled MS3, demonstrating its effective internalization, even in the absence of transfecting agents, with no general cytotoxicity. Then, using a well-established Drosophila melanogaster model for Huntington’s disease, which expresses the mutated form of human huntingtin, a significant improvement in the motor neuronal function in flies fed with MS3 was observed, proving the in vivo efficacy of this aptamer.     

Impact of variable frequency microwave and rapid thermal sintering on microstructure of inkjet-printed silver nanoparticles

The effect of thermal profile on microstructure is studied in the frame of thin films deposited by inkjet-printing technology. The role of sintering temperature and thermal ramp is particularly investigated. Fast heating ramps exhibit coarse grains and pores, especially when a hybrid microwave curing is performed. This enhanced growth is attributed to the quick activation of densifying sintering regimes without undergoing thermal energy loss at low temperature. Microstructural evolution of various sintered inkjet-printed films is correlated with electrical resistivity and with the Young’s modulus determined by nanoindentation. A strong link between those three parameters is highlighted during experiments giving credit to either a surface or a fully volumetric sintering, according to the process. Sintering is then mainly triggered by surface mass transfer or by grain boundary diffusion. Silver thin films with an electrical resistivity 4–5 times higher than the bulk, has been reached in a few minutes with a Young’s modulus of 38?GPa.     

Expanding the application field of post‐consumer poly(ethylene terephthalate) through structural modification by reactive blending

With the aim of up‐grading the material properties of post‐consumer PET, making them suitable for extrusion of thermoformable thick sheets, a series of polyepoxy chain extenders have been comparatively evaluated as melt viscosity modifiers for a toughened compatibilized blend containing up to 80 wt % of bottle‐grade post‐consumer recycled poly(ethylene terephtalate) (r‐PET). Combinations of a commercial modifier with pentaerythritol were also successfully employed to cause simultaneous hyperbranching and controlled chain scission, thereby modifying the melt rheology of the material without excessively increasing the molecular weight, as highlighted by common technological melt viscosity measurements such as online torque and off‐line melt flow rate (MFR). Since the high melt fluidity of PET plays a critical role on its flame resistance, the combined effect of chain extenders and halogen‐free phosphorated additives on the fire resistance of the modified toughened blends was also investigated. Preliminary results indicate that the chemical reactions among polymer and additives must be taken into careful account to prevent unfavorable effects on the ultimate melt rheology and mechanical properties. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40881.