An Analysis of Scheduling Policies In Multiechelon Production Systems

Results of a simulation study of the economics of frequency of rescheduling Material Requirements Planning (MRP) systems are presented for a single-product, two-stage system in which demand is uncertain. The results indicate that for systems with moderate demand uncertainty, frequent rescheduling to maintain customer service may be uneconomical when compared with the alternative of more stable schedules in conjunction with safety stock. This result arises primarily because the cost of “emergency” production setups which occur when rescheduling is frequent exceeds the cost of safety stock required to “protect” stable schedules.     

HEURISTIC APPROACHES FOR LOADING PROBLEMS IN FLEXIBLE MANUFACTURING SYSTEMS

Flexible manufacturing systems (FMSs) are able to process a wide variety of operations, but the specific mix of operations that can be performed at any point in time depends upon the combination of tools loaded onto the machines. The machines have tool magazines with finite capacities. We consider the problem of assigning operations and their associated tools to machines (or groups of machines) to maximize the throughput for a specified steady-state mix of orders. Since this objective is difficult to deal with directly, we use an intermediate objective of meeting workload targets for each machine group as closely as possible. A certain form of this intermediate objective has been shown to correlate highly with the original objective.

Since it is computationally intractable to find optimal solutions for problems with more than 20 operations, fast heuristic algorithms are developed. These algorithms are adapted from multi-dimensional bin-packing algorithms. Computational results are reported.     

Hematopoietic and lymphopoietic responses in human granulocyte-macrophage colony-stimulating factor (GM-CSF) receptor transgenic mice injected with human GM-CSF

Using a clonal assay of bone marrow (BM) cells from transgenic mice (Tg-mice) expressing the human granulocyte-macrophage colony-stimulating factor receptor (hGM-CSFR), we found in earlier studies that hGM-CSF alone supported the development not only of granulocyte-macrophage colonies, but also of erythrocytes, megakaryocytes, mast cells, blast cells, and mixed hematopoietic colonies. In this report, we evaluated the in vivo effects of hGM-CSF on hematopoietic and lymphopoietic responses in the hGM-CSFR Tg-mice. Administration of this factor to Tg-mice resulted in dose-dependent increases in numbers of reticulocytes and white blood cells (WBCs) in the peripheral blood. Morphological analysis of WBCs showed that the numbers of all types of the cell, including neutrophils, eosinophils, monocytes, and lymphocytes increased; the most remarkable being in lymphocytes that contained a number of large granular lymphocytes (LGLs) in addition to mature T and B cells. However, total cellularity of the BM of the Tg-mice decreased in a dose-dependent manner when hGM-CSF was injected. In sharp contrast to the BM, spleens of the Tg-mice were grossly enlarged. Although all types of blood cells and hematopoietic progenitors increased in the spleen, erythroid cells and their progenitors showed the most significant increase. Increased numbers of megakaryocytes and LGLs were also observed in spleen and liver of the treated Tg-mice. Flow cytometric analysis showed that LGLs expanded in Tg-mice expressed Mac-1+ CD3- NK1.1+. The thymus of Tg-mice treated with hGM-CSF exhibited a dose-dependent shrinkage and a remarkable decrease in CD4+ CD8+ cells. Thus, hGM-CSF stimulated not only myelopoiesis but also erythropoiesis and megakaryopoiesis of hGM-CSFR Tg-mice in vivo, in accordance with our reported in vitro findings. In addition, hGM-CSF affected the development of lymphoid cells, including natural killer cells of these Tg-mice.     

Hypomorphic mutation in an essential cell-cycle kinase causes growth retardation and impaired spermatogenesis

Cdc7 kinase is essential for initiation of DNA replication. Cdc7(-/-) mouse embryonic stem (ES) cells are non-viable but their growth can be rescued by an ectopically expressed transgene (Cdc7(-/-)tg). Here we report that, despite the normal growth capability of Cdc7(-/-)tg ES cells, the mice with the identical genetic background exhibit growth retardation. Concomi tantly, Cdc7(-/-)tg embryonic fibroblasts (MEFs) display delayed S phase entry and slow S phase progression. Furthermore, spermatogenesis of Cdc7(-/-)tg mice is disrupted prior to pachytene stage of meiotic prophase I. The impairment in spermatogenesis correlates with the extremely low level of Cdc7 protein in testes, and is rescued by introducing an additional allele of transgene, which results in increase of Cdc7 expression. The increased level of Cdc7 also recovers the growth of Cdc7(-/-)tg MEFs and mice, indicating that the developmental abnormalities of Cdc7(-/-)tg mice are due to insufficiency of Cdc7 protein. Our results indicate the requirement of a critical level of a cell-cycle regulator for mouse development and provide genetic evidence that Cdc7 plays essential roles in meiotic processes in mammals.     

DRYING OF GRANULAR PARTICLES IN A MULTISTAGE INCLINED FLUIDIZED BED WITH MECHANICAL VIBRATION

A mathematical model for the drying rate of granular particles in a multistage inclined fluidized bed(IFB) is presented from the standpoint of simultaneous heat and mass transfer, with taking the effect of mechanical vibration added vertically into consideration.

Steady-state distributions for the temperatures and concentrations of the particles and the heating gas, and for the moisture content of the particles are numerically calculated based on the present model. The calculated results show fairly good agreement with the experimental data, which were obtained from the drying experiments of brick particles in a three-stage IFB using comparatively low temperature air(40-60°C) as the heating gas.

It has been found within the range of the experimental conditions employed that, the mechanical vibration added vertically enhances the over-all drying rate of the particles and its effect can be considered equivalent to an increase in the air velocity.     

Planned Leadtimes For Serial Production Systems

We investigate the problem of setting planned leadtimes in serial production systems when the actual leadtimes are stochastic. The objective is to minimize the sum of inventory holding costs, rescheduling costs arising from tardiness at intermediate stages of production, and tardiness of delivery to the customer.

A single-pass algorithm is developed which finds optimal solutions. The analytical models underlying the algorithm and extensive computational experience indicate that it is never optimal to have planned leadtimes of zero when there are rescheduling costs at intermediate stages of production. This also implies that unconditional immediate dispatching is not optimal under these conditions.     

Path tracking control of a manipulator considering torquesaturation

When the minimum-time trajectory of a manipulator along a geometrically prescribed path is planned taking into consideration the manipulator's dynamics and actuator's torque limits, at least one of the joints should be at the torque limit. The execution of such a trajectory by a conventional feedback control scheme results in torque saturation. Consequently, the tracking error cannot be suppressed and the manipulator may deviate from the desired path. In this paper, the author's propose a feedback control method for path tracking which takes the torque saturation into account. Based on the desired path, a coordinate system called path coordinates is defined. The path coordinates are composed of the component along the path and the components normal to the path. The equation of motion is described in terms of the path coordinates. Control of the components normal to the path is given priority in order to keep the motion of the manipulator on the path. Simulations of a two-degree-of-freedom manipulator show the effectiveness of this method     

Direct Spectroscopic Determination of Europium(Ⅱ) Concentration During Europium(Ⅲ) Electro-Reduction in Hydrochloric Acid Medium

UV-Vis spectroscopy was used to directly determine the concentration of Eu(Ⅱ) during electroreduction of Eu(Ⅲ) in hydrochloric acid medium. Electroreduction was carried out in a flow type electrolyzer with glassy carbon cathode at the constant potential of -800 mV vs. Ag/AgCl. The effects of oxygen and concentration of hydrochloric acid on the system were investigated. For 0.01 mol·L-1 hydrochloric acid, calibration curves for Eu(Ⅱ) absorption bands at 248 and 320 nm were constructed. Molar absorption coefficients were estimated to be 2016 and 648 L·mol-1·cm-1, respectively. The absorbance strongly decreased with decrease in pH of the solution, whereas concentration of chloride had only a negligible effect.     

New strategies for aspiration pneumonia

Aspiration pneumonia is associated with decreases in both swallowing and cough reflexes and is the most common cause of death in the elderly. Basal ganglia strokes might predispose these patients to develop pneumonia owing to reductions of both reflexes, resulting in frequent aspiration during sleep. An impairment of dopamine metabolism in the basal ganglia is observed in these patients and levodopa administration improves the impaired swallowing reflex. Both swallowing and cough reflexes are mediated by endogenous substance P (SP) released from vagal sensory nerves in the pharynx and upper airways. The addition of a low dose of capsaicin to liquid or food, which stimulates the release of SP, may help prevent aspiration pneumonia. Angiotensin-converting enzyme inhibitor decreases SP catabolism resulting in improvements in both reflexes. Oral care and the sitting position after meals may decrease aspiration pneumonia in the elderly.