Selectivity Enhancement to the Exclusive Formation of Ethyltoluenes and Hydrogen During Dehydroalkylation of Toluene with Ethane

The dehydroalkylation of toluene with ethane to the isomeric ethyltoluenes was studied on 0.4Pt/H-ZSM-5 at varying contact times (1/WHSV). At a high contact time of 1.0 h, toluene disproportionation and hydrogenolysis reactions dominate, resulting in low selectivity to the desired ethyltoluenes via the alkylation reaction. However, at a low contact time of 0.12 h side reactions are eliminated, resulting in maximum selectivities to the kinetically favored ethyltoluenes and hydrogen. Results at high selectivities to ethyltoluenes provide significant insight into reaction pathways.     

Motion Perception Using Analog VLSI

Motion perception is arguably a fundamental mechanism used by natural species to accomplish a number of tasks, such as navigating freely in an unknown environment. Traditional motion perception methods tend to be computationally intensive, requiring powerful computers and large memories. However, by copying biological mechanisms, such as elementary motion discrimination at the early stages of the visual processing paths, it should be possible to build small and efficient motion perception systems. This paper describes the manner in which a simple motion perception model based on the insect visual system has been implemented using mixed analog/digital VLSI. The device has been fabricated in a 2 micron double metal, double polysilicon process, and comprises 61 photo-detectors, and associated analog and digital circuitry. While not entirely successful in that component mismatches hamper the detection of dark-to-bright changes in contrast, the results clearly show the feasibility of using such a device in autonomous control systems.     

Prediction of liquid–liquid phase diagrams of aqueous salt+PEG systems using a thermodynamic model

In this study a thermodynamic model for the phase behavior of aqueous salt+polymer solutions is developed. The model is based on the solution theory of Hill, which included scaling laws for the polymer molecular mass dependence and Pitzer–Debye–Hückel theory. This model was tested for systems composed of two different molecular mass of polyethylene glycols (PEG) and five different inorganic salts. All the model parameters were determined from independent measurements. The agreement between the experimental and predicted phase diagrams by this model is good.     

Evaporation and Evolution of Suspended Solution Droplets at Atmospheric and Reduced Pressures

Thermal history and solute precipitation behavior of suspended solution droplets of sodium chloride (NaCl), magnesium sulphate (MgSO₄), and zirconium hydroxychloride (ZrO(OH)Cl) evaporating at atmospheric and reduced pressures are studied. Experimental measurements on the variation of droplet diameter, solution concentration, and temperature during the evaporation period are presented and discussed. The results of solute precipitation behavior in solution droplets observed under an optical microscope are displayed and discussed. Results indicate that reducing the pressure (∼ 33 kPa) results in a change in the solution droplet evaporation rate, but the thermal histories of a particular solution droplet are similar at the atmospheric and reduced pressures. At atmospheric and reduced pressures used in this study, the d² law for solution droplets is valid at early stages of the evaporation and before the solute precipitation initiates. Drying of MgSO₄ and ZrO(OH)Cl solution droplets results in the formation of spherical particles, whereas drying of spherical NaCl solution droplets results in the formation of cubic particles.     

Effect of Reactor Ambient Pressure on the Morphology of Spray Dried Magnesium Sulphate Powders

The effect of reducing the reactor air pressure on the morphology of spray dried magnesium sulphate powders is investigated, experimentally. A reactor, capable of drying and pyrolyzing solution sprays at low pressures, is designed and manufactured. A vibrating mesh nebulizer is employed to generate the spray. Four different pressures, starting from 60 Torr to the atmospheric pressure, and two different reactor air temperatures of 130°C and 420°C, are considered. In addition, two different concentrations of magnesium sulphate solutions are tested. The results are explained based on the effect of reactor air pressure on the droplet evaporation rate.     

Photocatalytic degradation of methyl tert‐butyl ether (MTBE) in contaminated water by ZnO nanoparticles

BACKGROUND: Over the past several decades methyl tert‐butyl ether (MTBE) as additive to gasoline, intended to either boost ratings of fuel or to reduce air pollution, has been accepted worldwide. Since MTBE has high water solubility, the occurrence of fuel spills or leaks from underground storage tanks or transferring pipeline has led to the contamination of natural waters. In this study the degradation of aqueous MTBE at relatively high concentrations was investigated by a UV‐visible/ZnO/H₂O₂ photocatalytic process. The effects of important operational parameters such as pH, amount of H₂O₂, catalyst loading and irradiation time were also investigated. Concentration of MTBE and intermediates such as tert‐butyl formate and tert‐butyl alcohol were measured. RESULTS: Time required for complete degradation increased from 20 to 150 min when the initial concentration was increased from 10 to 500 mg L^?1. The first‐order rate constants for degradation of MTBE were estimated to be 0.183–0.022 min^?1 as the concentration increased from 10 to 500 mg L^?1. Study of the overall mineralization monitored by total organic carbon analysis showed that at an initial concentration of 100 mg L^?1 MTBE complete mineralization was obtained after 100 min under UV‐visible/ZnO/H₂O₂ photocatalysis. CONCLUSION: The data presented in this paper clearly indicated that UV‐visible/ZnO/O₂ as an advanced oxidation process provides an efficient treatment alternative for the remediation of MTBE‐contaminated waters. Copyright © 2008 Society of Chemical Industry     

Robust control of polytopic systems by convex optimization

Robust control synthesis of linear time-invariant SISO polytopic systems is investigated using the polynomial approach. A convex set of all stabilizing controllers for a polytopic system is given over an infinite-dimensional space. A finite-dimensional approximation of this set is obtained using the orthonormal basis functions and represented by a set of LMIs thanks to the KYP lemma. Then, an LMI based convex optimization problem for robust pole placement with sensitivity function shaping in two- and infinity-norm is proposed. The simulation results show the effectiveness of the proposed method.     

Consistency of robust estimators in multi-structural visual data segmentation

A theoretical framework is presented to study the consistency of robust estimators used in vision problems involving extraction of fine details. A strong correlation between asymptotic performance of a robust estimator and the asymptotic bias of its scale estimate is mathematically demonstrated where the structures are assumed to be linear corrupted by Gaussian noise. A new measure for the inconsistency of scale estimators is defined and formulated by deriving the functional forms of four recent high-breakdown robust estimators. For each estimator, the inconsistency measures are numerically evaluated for a range of mutual distances between structures and inlier ratios, and the minimum mutual distance between the structures, for which each estimator returns a non-bridging fit, is calculated.     

An incentive scheduling mechanism for peer-to-peer video streaming

P2P video streaming networks are found as a scalable solution and an alternative for traditional client–server based video streaming over the Internet. One of the significant issues affecting the success of any P2P streaming network is cooperation between peers. Practical observations have proved the prevalence of free riders in P2P networks that degrade their performance. To solve this problem, using incentive mechanisms, which encourage peers to contribute more in the network, is necessary. In this paper, we designed and proposed a distributed and scalable incentive mechanism for mesh based P2P video streaming networks. In the proposed approach the contribution of the peers is measured and maintained in a distributed fashion. Furthermore, we proposed an incentive sending side scheduler in which peers are served based on their contribution in the network. Our simulation evaluations show the efficiency of the proposed approach in improving the overall perceived video quality by the non-free rider nodes and consequently in the whole network.     

Prediction of scouring around an arch-shaped bed sill using Neuro-Fuzzy model

In this study, Adaptive Neuro-Fuzzy Inference System (ANFIS) has been used to model local scouring depth and pattern scouring around concave and convex arch shaped circular bed sills. The experimental part of this research study includes seven sets of laboratory test cases which were performed in an experimental flume under different flow conditions. A data set consists of 2754 data points of scouring depth were collected to use in the ANFIS model. The ratio of arch diameter, D, to flume width, W, is used as a non dimensional variables in all test cases. The results from ANFIS model were compared with the results of ANN model obtained by Homayoon et al. [24] and previously presented models. The results indicated that for D/W equal to 1 and 1.2, the ANFIS models produced a good performance for convex and concave bed sills. As a result, the ANFIS models can be used as an alternative to ANN for estimation of scour depth and scour pattern around a concave bed sill installed with a bridge pier.