Preparation of hydrophobic and conductive cotton fabrics using multi-wall carbon nanotubes by the sol–gel method

Journal of Sol-Gel Science and Technology - In this paper, a simple method is presented for making a conductive and hydrophobic cotton fabric using a multi-walled carbon nanotube (MWCNT). The...     

Fabrication and Optimization of Poly(vinyl alcohol)/Zirconium Acetate Electrospun Nanofibers Using Taguchi Experimental Design

This paper presents an investigation regarding poly(vinyl alcohol)/zirconium acetate (organic–inorganic) (PVA/Zrace) nanofibers prepared by electrospinning which could be used as a precursor for fabricating ceramic metal oxide nanofibers. The effect of some processing variables, including polymer solution concentration, tip to collector distance and applied voltage of electrospinning, and the amount of Zrace and their interactions, on the diameter of the nanofibers were studied. Taguchi experimental design and a statistical analysis (ANOVA) were employed and the relationship between experimental conditions and yield levels determined. It was concluded that to obtain a narrow diameter distribution as well as maximum fiber fineness, a polymer concentration of 10 wt%, tip to collector distance of 18 cm and applied voltage of 20 kV variables were the optimum. Furthermore, it was also concluded that the ratio of Zrace (6 g) to PVA solution (10% wt) played an important role for achieving the minimum fiber diameter. Under these optimum conditions, the diameters of the electrospun composite fibers ranged from 86 nm to 381 nm with a diameter average of 193 nm. The experiments were done with Qualitek-4 software with “smaller is better” as the quality characteristics. The optimized conditions showed an improvement in the fibers diameter distribution and the average fibers diameter showed good resemblance with the result predicted using the Taguchi method and the Qualitek-4 software. The ANOVA results showed that all factors had significant effects on the fibers diameter and distribution, but the effect of PVA concentration and zirconium acetate were more significant than the other factors.     

Fabrication of superhydrophobic polymethylsilsesquioxane nanostructures on cotton textiles by a solution-immersion process

Superhydrophobic cotton textiles are prepared by a simple, one-step and inexpensive phase separation method under ambient conditions by which a layer of polymethylsilsesquioxane (PMSQ) nanostructures is covered onto the cellulose fibers. By changing the silane precursor concentration, PMSQ nanostructures with various shapes, morphologies and sizes were fabricated. Nanostructures were characterized using SEM, EDS, and attenuated total reflectance FTIR. The wettability of the modified cellulose surfaces was characterized with contact-angle goniometry and sliding angle technique, respectively. The water contact angle of modified cotton is measured to be higher than 150°, which is high enough to exhibit the lotus effect as a result of the superhydrophobicity. Tunable water-repellent properties of the fabric are also demonstrated, with sliding contact angles varying from "sticky" to "slippery" depending upon different nanostructures on the surface of the fibers. It is expected that this simple technique will accelerate the large-scale production of superhydrophobic cellulosic materials with new industrial applications.     

Using graphene/TiO2 nanocomposite as a new route for preparation of electroconductive,self-cleaning,antibacterial and antifungal cotton fabric without toxicity

A novel and efficient process is reported for fabrication of electroconductive, self-cleaning, antibacterial and antifungal cellulose textiles using a graphene/titanium dioxide nanocomposite. Cotton fabric was loaded with graphene oxide using a simple dipping coating method. The graphene oxide-coated cotton fabrics were then immersed in TiCl₃ aqueous solution as both a reducing agent and a precursor to yield a fabric coated with graphene/titanium dioxide nanocomposite. The crystal phase, morphology, microstructure and other physicochemical properties of the as-prepared samples were characterized by X-ray diffraction, field emission scanning electron microscopy, transmission electron microscopy, X-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy, Raman spectroscopy and UV-Vis reflectance spectroscopy. Electrical resistance, self-cleaning performance, antimicrobial activity and cytotoxicity of treated fabrics were also assessed. The electrical conductivity of the graphene/titanium dioxide nanocomposite-coated fabrics was improved significantly by the presence of graphene on the surface of cotton fabrics. The self-cleaning efficiency of the treated fabrics was tested by degradation of methylene blue in aqueous solution under UV and sunlight irradiations. The results indicated that the decomposition rates of methylene blue were improved by the addition of graphene to the TiO₂ treatment on fabrics. Moreover, the graphene/titanium dioxide nanocomposite-coated cotton samples had negligible toxicity and possessed excellent antimicrobial activity.     

Production and Characterization of Zirconia (ZrO2) Ceramic Nanofibers by Using Electrospun Poly(Vinyl Alcohol)/Zirconium Acetate Nanofibers as a Precursor

Zirconia (ZrO₂) inorganic ceramic nanofibers were produced using electrospinning of the poly(vinyl alcohol)/zirconium acetate as a precursor followed by calcinating and sintering to decompose the polymer and turn the metal salt (zirconium acetate) into the metal oxide. Characterization of the nanofibers, including polymer thermal decomposition, chemical and crystal structure, phase transformations, and fiber morphology were investigated by simultaneous thermal analysis (STA), thermomechanical analysis (TMA), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and field emission scanning electron microscopy (FESEM). The results showed that the polymer decomposition started at 250°C and zirconia nanofibers with different phases (tetragonal and monoclinic) were obtained by the calcination of the precursor nanofibers at various temperatures between 500°C and 1100°C. The initially crystallized zirconia phase, which formed at 500°C, was tetragonal and with increasing calcination temperature, zirconia nanofibers with increasing amount of monoclinic phase were formed. Consequently, at 1100°C, the tetragonal phase disappeared and was transformed to the monoclinic phase of the zirconia completely. Increasing the calcination temperature caused the fiber average diameter decrease and grain growth took place due to the removal of the polymer and organic groups; neighboring grains sintered to each other and formed fibers with a high aspect ratio. At 1100°C the grains size was about the same as the fiber diameter.     

Effect of cationization on adsorption of silver nanoparticles on cotton surfaces and its antibacterial activity

Cotton was cationized by exhaustion method using 3-chloro-2-hydroxypropyl trimethyl ammonium chloride (CHPTAC) as a cation-generating agent. Adsorption of silver nanoparticles on normal and cationized cotton was studied by exhaustion method at temperatures of 80°C and 100°C. Two exhaustion baths were used, containing nanosilver colloidal solutions stabilized by two different stabilizers and various concentrations of silver nanoparticles. Fourier-transform infrared (FT-IR) spectra of normal and cationized samples confirmed the existence of quaternary ammonium groups on cationized cellulose fibers. X-ray diffraction (XRD) patterns showed that crystallinity of the modified cellulose fibers was decreased. Scanning electron microscope (SEM) images revealed that the surface of the modified cotton was rougher than that of normal cotton. In addition, SEM images showed the presence of silver nanoparticles on the surface of treated fabric samples. The amount of silver particles adsorbed on the fabric samples was determined using inductively coupled plasma-optical emission spectrometer. Antibacterial tests were performed against Escherichia coli bacteria as an indication of antibacterial effect of samples. Cationized cotton samples adsorbed more silver nanoparticles and then had greater ability to inhibit bacteria.     

Improving piezoelectric and pyroelectric properties of electrospun PVDF nanofibers using nanofillers for energy harvesting application

In this study, it was aimed to increase the piezoelectric and pyroelectric properties of electrospun polyvinylidene fluoride (PVDF) nanofibers simultaneously by using specific nanofillers. Graphene oxide (GO), graphene, and halloysite nanotubes with different concentrations (0, 0.05, 0.4, and 1.6% wt/wt) were combined with PVDF solution and were fabricated in the form of nanofibers through electrospinning. Pyroelectric properties of samples were measured by submerging sealed samples in hot water (360°K) and ice (270°K). The piezoelectric properties of the samples were evaluated through bending tests. The microstructural, mechanical, and thermal properties of the electrospun PVDF nanocomposite were investigated using scanning electron microscope, Instron instrument, and thermogravimetric analysis, respectively. To further support the experimental observations for generating electric voltage in the bended nanogenerator, the PVDF nanogenerator (PNG) was also modeled by a finite element analysis based on the theory of linear piezoelectricity using COMSOL Multiphysics simulation software. Experimental results showed that adding nanofillers could improve the piezoelectric and pyroelectric properties of all samples, associated with the increment of β‐phase in the nanofibers. It was concluded that adding nanofillers could increase pyroelectricity about 50% more than piezoelectricity in pristine PVDF nanofiber web. The PNG containing 1.6 wt% GO showed the highest efficiency in terms of piezoelectricity and pyroelectricity. In addition, the results showed that the ratio of piezoelectric to pyroelectric coefficients was constant (~1.5) and it was independent of the nanofiller type and content. The effect of external force and vibration frequency on the output voltage was also investigated. Increasing the compressive force and vibration frequency caused a greater output voltage. Finally, the fabricated nanogenerator was integrated on insole and elbow to investigate its energy harvesting capabilities from body movement.     

One-pot sonochemical synthesis of superhydrophobic organic–inorganic hybrid coatings on cotton cellulose

Inspired by the surface structure of lotus leaves, different types of superhydrophobic cellulosic materials with contact angle (CA) of higher than 150° are currently provided. However, fabrication of these surfaces in a facile one-step coating process is one of the challenging issues. This paper describes a facile method to sonochemically synthesize superhydrophobic organic–inorganic hybrid coatings on cotton fabric by an alkaline-catalyzed co-hydrolysis and co-condensation of tetraethylorthosilicate and alkyltrialkoxysilanes. The influence of alkyl chain length (methyl, octyl, hexadecyl) of silane and reaction time was investigated. Surface structure of the fabrics was investigated by SEM, EDS, FTIR spectroscopies, and reflectance spectrophotometry. Wettability properties were studied by measuring water CA, shedding angle (SHA) and resistance to wetting by a series of ethanol–water mixtures of different surface tensions. The results showed that the treated fabrics were coated with a homogeneous thin nano-scaled coating of hybrid silica nano-particles. The fabrics demonstrated CA of higher than 150°, SHA in the range of 6–24° and different stickiness to water droplets. The fabrics treated by silanes with longer alkyl chain length and at higher reaction time revealed better water repellency. The coatings were nearly transparent, could not affect the color of the fabrics and had high stability against repeated washing. In addition, mechanical properties of the fabrics were not substantially affected.     

The effects of cotton gauze coating with microbial cellulose

Microbial cellulose is a pure form of cellulose with widespread applications. It is very applicable for medical usage specially wound dressings due to its high liquid absorbency and hygienic nature. In this study, microbial cellulose formed/coated on cotton gauze samples during its biosynthesis in a static medium (Hestrin & Scharm) for 6 days by Acetobacter Xylinium. Some essential factors of treated gauze samples, like water absorbency, drying time (water holding time), and amount of vertical wicking were determined and compared with untreated samples. Results showed that cotton gauze coating with microbial cellulose increases water absorbency and wicking ability over 30%, and reduces drying time about 33%. It can be concluded that covering of cotton gauze with microbial cellulose can promote some important characteristics of it specially for wound dressings.     

Preparation of superhydrophobic electroconductive graphene-coated cotton cellulose

A simple and versatile method based on cotton cellulose coated with graphene is reported for the fabrication of superhydrophobic and electroconductive textiles. Graphene oxide was deposited on cotton fibers by a dip-pad-dry method followed by reduction with ascorbic acid to yield a fabric with a layer of graphene. The fabric was then reacted with methyltrichlorosilane to form polymethylsiloxane (PMS) nanofilaments on the fibers surface. The surface chemistry and morphology were characterized by UV–visible reflectance spectrophotometry, Fourier transform infrared spectroscopy, energy-dispersive X-ray spectroscopy and scanning electron microscopy. The water contact angle (CA)/shedding angle (SHA) and resistivity measurements were used for assessing hydrophobicity and conductivity, respectively. The graphene-coated fabric showed hydrophobicity with the CA of 143.2° ± 2.9° and SHA of 41°. The formation of PMS nanofilaments displayed superhydrophobicity with CA of 163° ± 3.4° and SHA of 7°, which indicated the self-cleaning ability. Conductivity of the graphene-coated fabric was confirmed by the electrical resistivity of 91.8 kΩ/sq which increased to 112.5 kΩ/sq after the formation of PMS nanofilaments.