Standardization of BSE rapid test performances and experiences gathered during the implementation of large-scale testing

The accumulation of pathological prion protein is used as a diagnostic marker for transmissible spongiform encephalopathies. According to European Union (EU) regulations cattle older than 30 months of age (Germany, France, Italy, and Spain by national law >24 months) and slaughtered for human consumption must be tested by using rapid tests for bovine spongiform encephalopathy (BSE). Likewise fallen stock and clinically affected animals must be tested. This article gives a short overview of the incidence of BSE in Europe. The diagnostic hierarchy, i.e., the officially approved methodology for the confirmation of suspect rapid test cases, and the organization of the numerous laboratories involved in this large-scale testing for BSE are described. Special emphasis is given to necessary quality control measures currently in place for BSE rapid testing laboratories and to measures intended to assure a consistent performance of the commercially available rapid test kits.Presented at BERM-9—Ninth International Symposium on Biological and Environmental Reference Materials, 15–19 June 2003, Berlin, Germany.     

The kinetics of the (5 × 20) → (1 × 1) structural transition for Au(100)

The kinetics of the anion-induced (5 × 20) → (1 × 1) surface structural transition of reconstructed Au(100) electrodes was studied in sulfate-containing solutions by current transients. It is shown that lifting of the reconstruction follows a nucleation-and-growth type behavior which can be described by the Avrami equation. Moreover, for high positive potentials, i.e., high anion coverages, the current-transient analysis reveals instantaneous nucleation, whereas for low transition overpotentials and long transition times a mechanism with constant transition rate prevails. Apparent activation energies, which depend strongly on the electrode potential, are derived from the temperature dependence of the Avrami plots.     

Kinetic model for hydrocarbon-assisted particulate boron combustion

A kinetic model is presented to describe the high temperature (1800 K < T < 3000 K) surface oxidation of particulate boron in a hydrocarbon combustion environment. The model includes a homogeneous gas-phase B/O/H/C oxidation mechanism consisting of 19 chemical species and 58 forward and reverse elementary reactions, multi-component gas-phase diffusion, and a heterogeneous surface oxidation mechanism consisting of ‘elementary’ adsorption and desorption reaction steps. Thermochemical and kinetic parameters for the surface reactions are estimated from available experimental data and/or elementary transition state arguments. The kinetic processes are treated using a generalized kinetics code, with embedded sensitivity analysis, for the combustion of a one-dimensional (particle radius), spherical particle. Model results are presented for the oxidation of a 200 μm boron particle in a JP-4/air mixture at ambient temperatures of 1400 K and 2000 K. These results include temperature and gas-phase species profiles as a function of radial distance and particle burning rates. © 1994 John Wiley & Sons, Inc.     

Relativistic Dynamics in Basic Chemistry

This paper revisits the historical sequence in which some of the major developments of 20th-century physics occurred, and explores how theories could have turned out differently, if the sequence of developments had been different. It shows how a delay in founding special relativity theory until after (1) at least one puzzling problem in electromagnetic theory could be acknowledged, and (2) sat least some of the experimental observations pertinent to the development of quantum mechanics had become well known, could have resulted in a larger theory that covers both domains in a manner quite different from that of any of the theories we use today. The revised theory dispenses with a separate postulate introducing Planck’s constant h, identifying instead a physical mechanism that implies the constant. Some important aspects of quantum chemistry then follow. Editor, Galilean Electrodynamics, Proceedings of the Natural Philosophy Alliance; Visiting Industry Professor, Tufts University, retired     

Structure and Magnetic Properties of Ce3Ge0.66In4.34 and Ce11Ge4.74In5.26

New indides Ce₃Ge_0.66In_4.34 and Ce₁₁Ge_4.74In_5.26 were synthesized from the elements by arc‐melting and subsequent annealing at 870 K. Single crystals were grown through special annealing procedures in sealed tantalum tubes in a high‐frequency furnace. Both compounds were investigated on the basis of X‐ray powder and single crystal data: I4/mcm, La₃GeIn₄ type, a = 848.8(1), c = 1192.0(2) pm, Z = 4, wR2 = 0.0453, 499 F² values, 17 variables for Ce₃Ge_0.66In_4.34 and I4/mmm, Sm₁₁Ge₄In₆ type (ordered version of the Ho₁₁Ge₁₀ type), a = 1199.3(2), c = 1662.0(3) pm, wR2 = 0.0507, 1217 F² values, 41 variables for Ce₁₁Ge_4.74In_5.26. The Ce₃Ge_0.66In_4.34 structure shows a mixed Ge/In occupancy on the 4c Wyckoff position. This site is octahedrally coordinated by cerium atoms. These octahedra share all edges, leading to a three‐dimensional network. The latter is penetrated by a two‐dimensional indium substructure which consists of flattened tetrahedra at In–In distances of 291 and 300 pm. The Ce₁₁Ge_4.74In_5.26 structure contains three crystallographically independent germanium sites. The latter are coordinated by eight or nine cerium neighbors. These CN8 and CN9 polyhedra are condensed to a complex network which is penetrated by a three‐dimensional indium network with In–In distances of 301–314 pm. The 16m site shows a mixed In/Ge occupancy. Chemical bonding in both compounds is dominated by the p elements. Both ternaries studied exhibit localized magnetism due to the presence of Ce³⁺ ions. The compound Ce₃GeIn₄ remains paramagnetic down to 1.72 K, whereas Ce₁₁Ge₄In₆ orders ferromagnetically at T_C = 7.5 K.     

Unexpected differences in the alpha-halogenation and related reactivity of sulfones with perhaloalkanes in KOH-t-BuOH

Most alkyl phenyl sulfones are readily alpha-chlorinated with CCl(4) and alpha-brominated with CBrCl3 in KOH-t-BuOH via radical-anion radical pair (RARP) reactions. While isopropyl mesityl sulfone (4) is easily alpha-chlorinated with CCl(4), it was completely recovered when treated with the more reactive CBrCl3. Subsequent investigations showed the latter result to be due to the poor acidity of 4 together with the rapid depletion of CBrCl3 and KOH by their reaction with each other, and led to a variety of other important results. 4-Hydroxyphenyl isopropyl sulfone (6) is unreactive with either CCl4 or CBrCl3 in KOH-t-BuOH, its phenoxide anion strongly reducing the electronegativity of the sulfonyl group, thereby inhibiting alpha-anion formation. This effect is reversed by the electron-withdrawing influence of two alpha-phenyls, so that benzhydryl 4-hydroxyphenyl sulfone (8) is readily alpha-halogenated in KOH-t-BuOH with CCl4 or CBrCl3. On further contact with KOH-t-BuOH the alpha-halogenated sulfones from 8 are decomposed into benzophenone and phenol. While the alpha-halogenated derivatives of 4-methoxyphenyl benzhydryl sulfone (9) are stable to base, they are decomposed even under mildly acidic conditions into 4-methoxyphenyl 4-methoxybenzenethiolsulfonate (9c), phenol, and benzophenone. Mono-alpha-halogenation of benzyl phenyl sulfone (10) enhances the rate of the subsequent halogenation, so that alpha,alpha-dihalogenation is attained while much substrate is still present and the mono-alpha-halogenated product is not detected. The ease of reductive debromination of alpha-bromo sulfones with Cl3C- was correlated with the stability of the formed alpha-anions, explaining the success with alpha-bromobenzylic sulfones but failure with alpha-bromoalkyl sulfones. In the presence of air and the absence of competing halogenation, formation of the alpha-anions of alkyl aryl sulfones is quickly accompanied by oxidative cleavage by atmospheric O2, leading to the formation of arenesulfonyl alcohols, arenesulfonyl halides, and haloarenes.