Super acid-induced Pummerer-type cyclization reaction: improvement in the synthesis of chiral 1,3-dimethyl-1,2,3,4-tetrahydroisoquinolines

Improved synthesis of four stereoisomeric chiral 1,3-dimethyl-1,2,3,4-tetrahydroisoquinolines (1a, b, ent-1a, b) was achieved via the super acid-induced cyclization of chiral N-[1-methyl-2-(phenylsulfinyl)ethyl]-N-(1-phenylethyl)formamides (4a, b, ent-4a, b) using the Pummerer-type cyclization reaction as a key step. The cyclization leading to the isoquinoline ring proceeded in a quantitative manner when trifluoromethane sulfonic acid (TFSA) was used as the super acid, although Friedel-Crafts-type alkylation of 4-phenylsulfanyl TIQ derivatives (5) with benzene used as the solvent accompanied cyclization to yield the 4-phenyl-TIQs (7). The byproduct (7) was exclusively formed when a large excess amount of TFSA was used.     

Reaction of 3,4-disubstituted 1,2,5-oxadiazole 2-oxides with dipolarophiles : Substituent and solvent effect on the reaction courses

A variety of symmetrically or unsymmetrically 3,4-disubstituttd furoxans such as dicyano, dialkyl, diacyl, bis(phenylsulfonyl), N.N'-dialkyldicarbamoyl, 3(or 4)-methyl-4(or -3)-phenyl(or nitro, ethoxy, phenoxy, phenylthio, pyrrolidinyl, phenylsulfonyl), 3(or 4)-ethyl-4(or -3)phcnyl, and 3(or 4)-ethoxy-4(or -3)-phenylsulfonylruroxan reacted with dipolarophiles in toluene or xylene at the refluxing temperature to give nitrone-type 1,3-dipolar cycloadducts, 5-substituted 1-aza-2,8-dioxabicyclo-[3.3.0]octanes and/or 3-substituted 2-isoxazoline 2-oxides. On the other hand, some of the furoxans gave 2-isoxazolines via nitrile oxide 1,3-dipolar cycloaddition in a toluene (or xylene)-DMF solvent at the refluxing temperature.     

Detection of the His-heme Fe2+-NO species in the reduction of NO to N2O by ba3-oxidase from thermus thermophilus

Reaction pathways in the enzymatic formation and cleavage of the N-N and N-O bonds, respectively, are difficult to verify without the structure of the intermediates, but we now have such information on the heme a(3)(2+)-NO species formed in the reaction of ba(3)-oxidase with NO from resonance Raman spectroscopy. We have identified the His-heme a(3)(2+)-NO/Cu(B)(1+) species by its characteristic Fe-NO and N-O stretching frequencies at 539 and 1620 cm(-)(1), respectively. The Fe-NO and N-O frequencies in ba(3)-oxidase are 21 and 7 cm(-)(1) lower and higher, respectively, than those observed in Mb-NO. From these results and earlier Raman and FTIR measurements, we demonstrate that the protein environment of the proximal His384 that is part of the Q-proton pathway controls the strength of the Fe-His384 bond upon ligand (CO vs NO) binding. We also show by time-resolved FTIR spectroscopy that Cu(B)(1+) has a much lower affinity for NO than for CO. We suggest that the reduction of NO to N(2)O by ba(3)-oxidase proceeds by the fast binding of the first NO molecule to heme a(3) with high-affinity, and the second NO molecule binds to Cu(B) with low-affinity, producing the temporal co-presence of two NO molecules in the heme-copper center. The low-affinity of Cu(B) for NO binding also explains the NO reductase activity of the ba(3)-oxidase as opposed to other heme-copper oxidases. With the identification of the His-heme a(3)(2+)-NO/Cu(B)(1+) species, the structure of the binuclear heme a(3)-Cu(B)(1+) center in the initial step of the NO reduction mechanism is known.     

A synthesis of chiral 1,1,3-trisubstituted 1,2,3,4-tetrahydro-beta-carbolines by the Pictet-Spengler reaction of tryptophan and ketones: conversion of (1R,3S)-diastereomers into their (1S,3S)-counterparts by scission of the C(1)-N(2) bond

The Pictet-Spengler cyclization of the imines (3) prepared by the condensation of L-tryptophan methyl ester (1) and aryl methyl ketones (2), using titanium(IV) isopropoxide as an iminating reagent, quantitatively proceeded, when treated with trifluoroacetic acid (TFA) or formic acid, to provide two diastereomers, that is (1S,3S)-1-aryl-3-isopropoxycarbonyl-1-methyl-1,2,3,4-tetrahydro-beta-carbolines (4) and their (1R,3S)-diastereomers (5), of which the diastereomer ratios varied from 1 to 5 depending on the reaction conditions. The (1R,3S)-diastereomers (5) are thermodynamically more stable than their (1S,3S)-congeners (4), as shown by equilibration experiments in TFA. The conversion of 4 to 5 (also 5 to 4) should occur under acidic conditions by cleavage of the C(1)-N(2) bond with complete retention of configuration at the C-3 chiral center. The low diastereo-selectivity observed in the Pictet-Spengler reaction of 1 and 2 is concluded to be a stereochemical outcome under conditions of kinetic control (lower temperature, shorter reaction time), while the high diastereo selectivity with preferential formation of the more stable isomer (5) is the result of thermodynamically controlled experiments (higher temperature, longer reaction time).     

A Light-Harvesting/Charge-Separation Model with Energy Gradient Made of Assemblies of meta-Pyridyl Zinc Porphyrins

Self-assembly of porphyrins is a fascinating topic, not only for mimicking chlorophyll assemblies in photosynthetic organisms, but also for the potential of creating molecular-level devices. Herein, zinc porphyrin derivatives bearing a meta-pyridyl group at the meso position were prepared and their assemblies studied in chloroform. Among the porphyrins studied, one with a carbamoylpyridyl moiety gave a distinct ¹H NMR spectrum in CDCl₃, which allowed the supramolecular structure in solution to be probed in detail. Ring-current-induced chemical-shift changes in the ¹H NMR spectrum, together with vapor-pressure osmometry and diffusion-ordered NMR spectroscopy, among other evidence, suggested that the porphyrin molecules form a trimer with a triangular cone structure. Incorporation of a directly linked porphyrin–ferrocene dyad with the same assembling properties in the assemblies led to a rare example of a light-harvesting/charge-separation system in which an energy gradient is incorporated and reductive quenching occurs.     

Effect of UV anneal on plasma CVD low-k film

Plasma-enhanced chemical vapor deposition (PE-CVD) low-dielectric (low-k) film was irradiated with ultra violet (UV) light of wavelength 172 nm to enhance mechanical strength and reduce dielectric constant (k value). The thickness measurement method for the UV annealed low-k film is discussed. The effects of UV irradiation on dielectric constant, shrinkage, stress, density, pore size, mechanical strength, and structure are clarified and the mechanism is discussed.     

Carboxylic acid recognition of diamidine having a fluorescent 1,8-diphenylanthracene unit and its detection of amidinium-carboxylate and amidinium formation

A diphenylanthracene-based diamidine (1a) fluorescent probe for the detection of dicarboxylic acids has been designed and synthesized, which has an extended π-conjugation rather than a simple anthracene ring, in order to observe highly different fluorescence wavelengths after complex formation with dicarboxylic acids. The fluorescence spectra of the mixed solution of the diamidine 1a and carboxylic acids showed two different fluorescence bands, which corresponded to the complex formation (amidinium-carboxylate formation, λ_em?=?450?nm, light blue color) and dissociated amidinium formation (λ_em?=?510?nm as a broad band, green color). The complexed and dissociated states were confirmed by DOSY NMR and TD-DFT calculations. These different fluorescence wavelengths may come from the differences in the dihedral angles between the phenyl rings at the 1,8-position and anthracene ring (difference in π-conjugation) of 1a under complex formation and dissociated amidinium formation. The proposed mechanism for the observation of the different fluorescence wavelengths (complex formation and amidinium formation) was also confirmed by the fluorescence study of diamidine 1b which causes restricted rotation of the phenyl rings by substitution of the steric methyl groups, and observed the same fluorescence spectra for the complex formation and amidinium formation (400, 420, 450?nm as a vibrational structure of anthracene ring). These fluorescence characteristics of the diamidine 1a are also applicable for the detection of α,ω?dicarboxylic acids.     

Asymmetric synthesis of optically active α-substituted α-amino-H-phosphinates through resolution of 1,1-diethoxyethyl(aminomethyl)phosphinates

Both enantiomers of 1,1-diethoxyethyl(aminomethyl)phosphinates were prepared through chromatographic separation of a diastereomeric mixture derived from (S)-phenylethylamine and 1,1-diethoxyethyl-H-phosphinate. The individual enantiomer was transformed into α-substituted α-amino-H-phosphinate with high enantiomeric purity by a highly diastereoselective alkylation at the α-carbon on the basis of our previously developed method.     

Manganese(II) o ctacyanotungstate(V)-based magnet containing a noncoordinated aromatic molecule

We have prepared a pillared layer magnetic material containing a noncoordinated aromatic molecule, [{MnII(pyrimidine)(H2O)}2{MnII(H2O)2}{WV(CN)8}2](pyrimidine)2.2H2O. This compound has one-dimensional channels (6.2 x 2.1 A) that are occupied by noncoordinated pyrimidine. The magnetization versus temperature plots showed the magnetic phased transition temperature (TC) was 47 K. The magnetization versus external magnetic field plots showed that the saturation magnetization (MS) value was 13.0 muB at 2 K. This MS value indicates that an antiferromagnetic interaction operates between the WV (S = 1/2) and MnII (S = 5/2) ions. The magnetic hysteresis loop showed that the coercive field (HC) was 17 G at 2 K.