Raman spectroscopy and thermal analysis of gum and silica-filled NR/SBR blends prepared from latex system

Natural rubber/styrene-butadiene rubber (NR/SBR) blends, with and without silica, were prepared by co-coagulating the mixture of rubber latices and various amounts of well-dispersed silica suspension. An attempt to predict blend compositions was made using Raman spectroscopy in association with differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). It was found that the intensity of each Raman characteristic peak was strongly dependent on the blend composition, but there was no significant evolution with the presence of silica. Also, TGA results revealed an improvement in thermal stability of NR/SBR blends with increasing both SBR and silica contents due to the dilution effect. Two distinct glass transition temperatures (T_g) were observed in DSC thermograms of all blends, and their T_g values were independent on both blend composition and silica content. This indicated a physical blend formation, which agreed well with no shifts in Raman peaks of the blends in comparison with those of the individual rubbers. Linear regression with R² quality factor close to 0.99 was achieved when plotting intensity ratio at 1371/1302 cm^?1 versus blend ratios. On the other hand, the peak height ratio and heat capacity ratio from TGA and DSC analysis, respectively, yielded quadratic equations as a function of blend ratios.     

Sequential determination of trace amounts of iron and copper in water samples by flow injection analysis with catalytic spectrophotometric detection.

A simple flow injection analysis (FIA) method is described for the sequential determination of iron and copper. The detection method for iron and copper is based on their catalytic activities in the oxidation reaction of N,N-dimethyl-p-phenylenediamine (DPD) with hydrogen peroxide. The sequential determination of iron and copper can be carried out by injecting two sample plugs into the FIA system, sequentially. One injection does not contain triethylenetetramine (TETA), and is used for the sum of iron and copper concentration; the other which contains TETA is used only for the iron concentration. For iron determination, TETA is used as a masking agent of copper. The difference in peak height can be used for the calculation of copper concentration. Under the optimal conditions, the detection limits (3sigma) of 0.01 and 0.07 microg L(-1) were obtained for iron and copper, respectively. The proposed method can be applied to the determination of iron and copper in tap water and bottled-drinking mineral water samples. Good recoveries of the method, 98-103% for iron and 98-106% for copper, were achieved.     

Gelation study of high processability and high reliability ternary systems based on benzoxazine, epoxy, and phenolic resins for an application as electronic packaging materials

 Fourier transform mechanical spectroscopy technique (FTMS) is utilized as a powerful tool to study the sol-gel transition of covalent bonded polymeric network. Winter and Chambon criteria resulting from the fractal-geometry characteristic of the gel networks allow the determination of the gel point with only single experiment using this technique. The gelation behaviors of low melt viscosity ternary systems of benzoxazine, epoxy, and phenolic resins are investigated and analyzed by the technique in order to study the effect of epoxy diluent on the rheological property development before and after the gel points. The gel time at 140 °C ranges from 5 min to 30 min and less than 5 min at 180 °C for all tested ternary system compositions. The gelation of the ternary mixture shows an Arrhenius-type behavior and the gel time can be well-predicted by the Arrhenius equation. Received: 23 November 1999 Accepted: 2 January 2001     

Thermal degradation behaviors of polybenzoxazine and silicon-containing polyimide blends

Thermal behaviors of polymer blends between common-type polybenzoxazine (PBA-a) and polysiloxane-block-polyimide (SPI) were studied using Dynamic Mechanical Analysis (DMA) and Thermogravimetric Analysis (TGA). The polymer blends showed only one glass-transition temperature (T_g) that increased as the content of SPI increased. Synergistic behavior in the char formation of the alloys was clearly observed. The DTG curves showed three stages and two stages of decomposition reaction in neat PBA-a and SPI, respectively. For the blending systems with 25 wt%, 50 wt%, and 75 wt% of SPI, the DTG thermograms of the blends exhibited four stages of thermal decomposition reaction. The apparent activation energies (E_a) of each step were determined using Kissinger method, Flynn-Wall-Ozawa method and Coats-Redfern method. The type of solid state mechanism was determined by Criado method. From the calculation, the solid state thermal degradation mechanism is proposed to be F1 (random nucleation with one nucleus on the individual particle) type for PBA-a, SPI, and their blends.     

Thermal degradation mechanism of highly filled nano-SiO2 and polybenzoxazine

Effects of high nano-SiO₂ loading (up to 30 mass%) on polybenzoxazine (PBA-a) thermal degradation kinetics have been investigated using nonisothermal thermogravimetric analysis (TG). The DTG curves revealed three stages of thermal decomposition process in the neat PBA-a, while the first peak at low temperature was absent in its nanocomposites. As a consequence, the maximum degradation temperature of the nanocomposites shifted significantly to higher temperature as a function of the nano-SiO₂ contents. Moreover, the degradation rate for every degradation stage was found to decrease with the increasing amount of the nano-SiO₂. From the kinetics analysis, dependence of activation energy (E _a) of the nanocomposites on conversion (α) suggests a complex reaction with the participation of at least two different mechanisms. From Coats–Redfern and integral master plot methods, the average E _a and pre-exponential factor (A) of the nanocomposites showed systematically higher value than that of the PBA-a, likely from the shielding effect of the nanoparticles. The main degradation mechanism of the PBA-a was determined to be a random nucleation type with one nucleus on the individual particle (F1 model), while that of the PBA-a nanocomposite was the best described by diffusion-controlled reaction (D3 model).     

A Shear-Thinning,Self-Healing,Dual-Cross Linked Hydrogel Based on Gelatin/Vanillin/Fe3+/AGP-AgNPs: Synthesis,Antibacterial, and Wound-Healing Assessment

A shear-thinning and self-healing hydrogel based on a gelatin biopolymer is synthesized using vanillin and Fe³⁺ as dual crosslinking agents. Rheological studies indicate the formation of a strong gel found to be injectable and exhibit rapid self-healing (within 10 min). The hydrogels also exhibited a high degree of swelling, suggesting potential as wound dressings since the absorption of large amounts of wound exudate, and optimum moisture levels, lead to accelerated wound healing. Andrographolide, an anti-inflammatory natural product is used to fabricate silver nanoparticles, which are characterized and composited with the fabricated hydrogels to imbue them with anti-microbial activity. The nanoparticle/hydrogel composites exhibit activity against Escherichia coli, Staphylococcus aureus, and Burkholderia pseudomallei, the pathogen that causes melioidosis, a serious but neglected disease affecting southeast Asia and northern Australia. Finally, the nanoparticle/hydrogel composites are shown to enhance wound closure in animal models compared to the hydrogel alone, confirming that these hydrogel composites hold great potential in the biomedical field.     

Hydrodynamic Sequential Injection Spectrophotometric System for Determination of Manganese in Soil

ABSTRACT

A novel hydrodynamic sequential injection (HSI) spectrophotometric system for determination of manganese was developed. It is based on the complexation of Mn(II) with formaldoxime in basic solution (pH ≥ 10) to produce product that could be monitored spectrophotometrically at 450 nm. Based on the HSI concept, both sample and reagents were aspirated through solenoid valves to fill a defined volumes conduit between 3-way connectors connected in series, forming stacked zones of solutions similar to those in normal SI. The concept was successfully demonstrated for manganese determination. A linear calibration graph over a range of 0.5 to 30 mg L^?1 Mn(II) with a detection limit of 0.2 mg L^?1 was obtained. Relative standard deviations for 11 replicated injections of 5 and 20 mg Mn L^?1 were 5.6% and 2.4%, respectively. A sample throughput of 45 h^?1 was achieved. The results from investigation of exchangeable manganese in soil samples by the developed method were found to be in good agreement with the results obtained by a batch spectrophotometric method, despite the proposed system employed simpler and more cost-effective devices/instruments, had higher degrees of automation with full microcontroller control of the operation, and consumed smaller amounts of chemicals (250 µL each of hydroxylamine, sample, and formaldoxime solutions and 2.5 mL of buffer carrier solution per operation cycle).     

The biotin enzyme family: conserved structural motifs and domain rearrangements

The biotin carboxylase family is comprised of a group of enzymes that utilize a covalently bound prosthetic group, biotin, as a cofactor. These enzymes, which include acetyl-CoA carboxylase, pyruvate carboxylase, propionyl-CoA carboxylase, methylcrotonyl-CoA carboxylase, geranoyl-CoA carboxylase, oxaloacetate decarboxylase, methylmalonyl-CoA decarboxylase, transcarboxylase and urea amidolyase, are found in diverse biosynthetic pathways in both pro-karyotes and eukaryotes. The reactions catalyzed by most members of this group of enzymes share two common features: (1) carboxylation of biotin, apparently via the formation of a carboxyphosphate intermediate, followed by (2) transcarboxylation of CO(2) from biotin to specific acceptor molecules to yield different products. Structural determinations by NMR and X-ray crystallography, complemented by mutagenesis studies, have identified some motifs that are structurally or catalytically important. Analysis of the amino acid sequences of a number of biotin carboxylases not only shows remarkable similarities within certain domains but also that there appears to have been domain rearrangements between groups of carboxylases. Acyl-coenzyme A derivatives, which bind either as substrates or as allosteric regulators of the biotin carboxylases, do not appear to share any of the CoA binding motifs that have been identified in other CoA-SH/acyl-CoA binding proteins. Further comparisons of biotin-dependent carboxylases with other groups of enzymes in the protein data bank reveal that this family of biotin enzymes has strong similarities in specific domains to a number of ATP-utilizing enzymes and to the lipoyl-containing enzymes. These structural homologies are so extensive as to be highly suggestive of evolutionary relationships between biotin carboxylases and these other enzymes.     

Synergism and multiple mechanical relaxations observed in ternary systems based on benzoxazine,epoxy, and phenolic resins

The synergism in the glass‐transition temperature (T_g) of ternary systems based on benzoxazine (B), epoxy (E), and phenolic (P) resins is reported. The systems show the maximum T_g up to about 180 °C in BEP541 (B/E/P = 5/4/1). Adding a small fraction of phenolic resin enhances the crosslink density and, therefore, the T_g in the copolymers of benzoxazine and epoxy resins. To obtain the ultimate T_g in the ternary systems, 6–10 wt % phenolic resin is needed. The molecular rigidity from benzoxazine and the improved crosslink density from epoxy contribute to the synergistic behavior. The mechanical relaxation spectra of the fully cured ternary systems in a temperature range of −140 to 350 °C show four types of relaxation transitions: γ transition at −80 to −60 °C, β transition at 60–80 °C, α₁ transition at 135–190 °C, and α₂ transition at 290–300 °C. The partially cured specimens show an additional loss peak that is frequency‐independent as a result of the further curing process of the materials. The ternary systems have a potential use as electronic packaging molding compounds as well as other highly filled systems. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 1687–1698, 2000