Sulfobetaine‐containing diblock and triblock copolymers via reversible addition‐fragmentation chain transfer polymerization in aqueous media

A novel bifunctional acrylamido‐based reversible addition–fragmentation chain transfer (RAFT) chain‐transfer agent (CTA), N,N′‐ethylenebis[2‐(thiobenzoylthio)propionamide] (CTA2), has been synthesized and used for the controlled free‐radical polymerization of N,N‐dimethylacrylamide (DMA). A comparative study of CTA2 and the monofunctional CTA N,N‐dimethyl‐s‐thiobenzoylthiopropionamide (CTA1) has been conducted. Polymerizations mediated by CTA1 result in poly(N,N‐dimethylacrylamide) (PDMA) homopolymers with unimodal molecular weight distributions, whereas CTA2 yields unimodal, bimodal, and trimodal distributions according to the extent of conversion. The multimodal nature of the PDMAs has been attributed to termination events and/or chains initiated by primary radicals. The RAFT polymerization of DMA with CTA2 also results in a prolonged induction period that may be attributed to the higher local concentration of dithioester functionalities early in the polymerization. A series of ω‐ and α,ω‐dithioester‐capped PDMAs have been prepared in organic media and subsequently employed as macro‐CTAs for the synthesis of diblock and triblock copolymers in aqueous media with the zwitterionic monomer 3‐[2‐(N‐methylacrylamido)‐ethyldimethylammonio] propane sulfonate (MAEDAPS). Additionally, an ω‐dithioester‐capped MAEDAPS homopolymer has been used as a macro‐CTA for the block polymerization of DMA. To our knowledge, this is the first example of a near‐monodisperse, sulfobetaine‐containing block copolymer prepared entirely in aqueous media. The diblock and triblock copolymers form aggregates in pure water that can be dissociated by the addition of salt, as determined by ¹H NMR spectroscopy and dynamic light scattering. In pure water, highly uniform, micellelike aggregates with hydrodynamic diameters of 71–93 nm are formed. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1262–1281, 2003     

Photonic crystal devices

We developed photochemically controlled photonic crystals which may be useful in novel recordable and erasable memories and/or display devices. These materials can operate in the UV, visible or near IR spectral regions. Information is recorded and erased by exciting the photonic crystal with ∼ 360 nm UV light or ∼ 480 nm visible light. The recorded information is read out by measuring the photonic crystal diffraction wavelength. The active element of the device is an azobenzene functionalized hydrogel which contains an embedded crystalline colloidal array. UV excitation forms cis-azobenzene while visible excitation forms trans-azobenzene. Larger dipole moment of the cis-form results in decrease of the free energy of mixing which causes the hydrogel to swell and to red-shift the photonic crystal diffraction with a 36 s time constant. We also observed fast ms and sub-ms transient dynamics associated with convection due to heating of the medium by UV excitation. Convective motion of the medium stretches the PCCA for about 6 μs within which the convection decays and the elastic restoring force of the PCCA brings back the stretched PCCA to its equilibrium state with 33 μs time constant. Paper presented at the 2nd International Conference on Ionic Devices, Anna University, Chennai, India, Nov. 28–30, 2003.     

Three-photon near-threshold photoionization dynamics of isooctane

The electron survival probability following three-photon (9.3 eV total) near-threshold photoionization of neat isooctane is measured with sub-50 fs time resolution. The measured dynamics are nonexponential in time and are well described by a diffusion-controlled electron-cation recombination model. Excitation-power-dependent studies indicate that the unperturbed three-photon threshold ionization is only observed for pump irradiance below 0.5 TW cm2. At excitation fields above this level, the signal is no longer cubic in the excitation irradiance, and the observed electron survival probability dramatically changes, decaying as a single exponential in time.     

Fully automated micro- and nanoscale one- or two-dimensional high-performance liquid chromatography system for liquid chromatography-mass spectrometry compatible with non-volatile salts for ion exchange chromatography

A one- or two-dimensional high performance liquid chromatography system for electrospray ionization mass spectrometers has been developed that is optimized for ion exchange and reversed phase separations. A unique and simple valve configuration permits the use of a variety of non-volatile salts; ammonium sulfate was used in an example of strong cation exchange separations. The system was designed and evaluated for both micro- and nanoflow chromatography. The peptide detection limit was approximately 100 fmol for micro- and 20 fmol for nanoflow, demonstrating the concentration and mass sensitivity improvements expected with nanoelectrospray ionization. The 1D/2D-HPLC MS system is fully automated for routine peptide analyses, compatible with direct injection of proteolytic digests, and exhibits chromatographic reproducibility and sensitivity. Software permits operator selection of either a 1D or 2D configuration with corresponding system parameters as required for individual samples. The hardware elements and resulting performance are described in this paper.     

Nanogel nanosecond photonic crystal optical switching

We developed a robust nanosecond photonic crystal switching material by using poly(N-isopropylacrylamide) (PNIPAM) nanogel colloidal particles that self-assemble into crystalline colloidal arrays (CCAs). The CCA was polymerized into a loose-knit hydrogel which permits the individual embedded nanogel PNIPAM particles to coherently and synchronously undergo their thermally induced volume phase transitions. A laser T-jump from 30 to 35 degrees C actuates the nanogel particle shrinkage; the resulting increased diffraction decreases light transmission within 900 ns. Additional transmission decreases occur with characteristic times of 19 and 130 ns. Individual NIPAM sphere volume switching occurs in the approximately 100 ns time regime. These nanogel nanosecond phenomena may be useful in the design of fast photonic crystal switches and optical limiting materials. Smaller nanogels will show even faster volume phase transitions.     

Regioselectivity in palladium-catalyzed C-H activation/oxygenation reactions

[reaction: see text] Palladium-catalyzed directed C-H activation/oxygenation reactions have been explored in a series of meta-substituted aryl pyridine and aryl amide derivatives. These transformations tolerate a diverse array of electron-donating and electron-withdrawing meta-substituents and generally proceed with high levels of regioselectivity for functionalization of the less sterically hindered ortho-C-H bond.     

Highly efficient, one-step macrocyclizations assisted by the folding and preorganization of precursor oligomers

Highly efficient, one-step macrocyclizations leading to the formation of macrocyclic hexa(aramides) in high yields (69-82%) are described. The one-step macrocyclizations were facilitated by the preorganization or folding of the backbones of uncyclized precursors in the course of macrocyclization. The preorganization of backbones was achieved by the presence of localized three-centered hydrogen bonds that were adopted in the design of a class of closely related, backbone-rigidified foldamers. The macrocyclization involved reactions between diacid chloride 1 and diamine 2. The crude reaction mixtures and products were conveniently examined by mass spectrometric method (MALDI-TOF). Compared to most traditional one-step macrocyclizations that usually require high dilution conditions and often lead to very low overall yields of the desired products, cyclic hexamers 3 were obtained as the overwhelmingly major product under a variety of reaction conditions, suggesting the generality of this approach.     

Synthesis and utilization of monodisperse hollow polymeric particles in photonic crystals

We developed a process to fabricate 150-700 nm monodisperse polymer particles with 100-500 nm hollow cores. These hollow particles were fabricated via dispersion polymerization to synthesize a polymer shell around monodisperse SiO(2) particles. The SiO(2) cores were then removed by HF etching to produce monodisperse hollow polymeric particle shells. The hollow core size and the polymer shell thickness, can be easily varied over significant size ranges. These hollow polymeric particles are sufficiently monodisperse that upon centrifugation from ethanol they form well-ordered close-packed colloidal crystals that diffract light. After the surfaces are functionalized with sulfonates, these particles self-assemble into crystalline colloidal arrays in deionized water. This synthetic method can also be used to create monodisperse particles with complex and unusual morphologies. For example, we synthesized hollow particles containing two concentric-independent, spherical polymer shells, and hollow silica particles which contain a central spherical silica core. In addition, these hollow spheres can be used as template microreactors. For example, we were able to fabricate monodisperse polymer spheres containing high concentrations of magnetic nanospheres formed by direct precipitation within the hollow cores.