Cationic poly(methacryl oxyethyl trimethylammonium) and its poly(ethylene glycol)‐grafted analogue as capillary coating materials in electrophoresis

Cationic polyelectrolytes were synthesized and used as semipermanent coating materials for capillaries in electrophoresis. The polyelectrolytes used were a homopolymer of poly(methacryl oxyethyl trimethylammonium chloride) (PMOTAC) and its poly(ethylene glycol) (PEG)‐grafted analogue. Two PMOTAC polyelectrolytes, with molar masses of 85,000 and 300,000 g/mol, and PEG‐grafted PMOTAC with a molar mass of 280,000 g/mol were synthesized and then characterized by size exclusion chromatography (SEC) and nuclear magnetic resonance (NMR) spectroscopy. Attachment of the polyelectrolytes to the wall of the fused silica capillary for electrophoresis caused the electroosmotic flow (EOF) to reverse. The polyelectrolyte coatings were tested over the pH range 2–11 at different buffer ionic strengths, and the most stable and strongest anodic EOFs were obtained at acidic pH values with low ionic strength buffers. Between runs the capillary is merely rinsed for 2 or 3 min with the background electrolyte solution. With the PMOTAC coatings at pH values ≤5, the RSDs of the EOFs were less than 2.9% after 60 injections. The effects of the molar mass of the polycation and of PEGylation of PMOTAC on the interactions between the polycations and basic proteins were studied at acidic pH values. The differences in the effective electrophoretic mobilities, resolution values, and plate numbers of the proteins with the different coatings were due to the EOF, as demonstrated through calculations of reduced mobilities, relative resolution values, and relative plate numbers. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2655–2663, 2007     

Supercritical fluid extraction combined with solid phase extraction as sample preparation technique for the analysis of β-blockers in serum and urine

A method is developed for the determination of β-blockers in serum and urine at levels of 0.5 μg/mL. The technique uses a combination of solid phase extraction (SPE) with in situ derivatization and supercritical fluid extraction (SFE) with subsequent gas chromatography mass spectrometry. The optimization of the SFE step shows that a static extraction period can be eliminated. The method gives good linearity (r = 0.991–0.999) and repeatability in the concentration range of 0.5 to 5 μg/mL. Relative standard deviations for oxprenolol, propanolol and metoprolol were less than 5% in serum and 5–11% in urine. Received: 23 May 1997 / Revised: 28 July 1997 / Accepted: 5 August 1997     

Determination of biogenic amines in wine by multidimensional liquid chromatography with online derivatisation

An online multidimensional liquid chromatographic system was developed for online clean-up, derivatisation and separation of biogenic amines in wines. The system consists of a cation-exchange precolumn, a derivatisation coil and an analytical column, and a column-switching valve. The entire system can be easily automated. The method proved to be quantitative and sensitive. Limits of detection were below 0.05 mg l(-1) for all amines and linearity was preserved over the tested range (0.05-15 mg l(-1)). The method was applied to the analysis of red wines of different origin.     

Influence of pH on formation and stability of phosphatidylcholine/phosphatidylserine coatings in fused-silica capillaries

The effect of pH on the formation and stability of phospholipid coatings in fused-silica capillaries in electrophoresis was investigated. A liposome solution consisting of 3 mM of 80:20 mol% phosphatidylcholine/phosphatidylserine (PC/PS) in N-(2-hydroxyethyl)piperazine-N'-(2-ethanesulfonic acid) (HEPES) buffer was used as coating material. The coating was prepared by a method described earlier and five steroids were used as neutral model analytes. First, the effect of pH of the coating solution on the formation and stability of phospholipid coatings was studied at pH 6.5-8.5. The pH of the background electrolyte (BGE) solution (HEPES) was either kept constant at pH 7.4 or made similar to the pH of the liposome coating solution. Results showed that attachment of the coating on the fused-silica wall mostly depends on the protonation of amines of the phospholipids and HEPES. The ability of the phospholipid coating to withstand changes in pH was then investigated by coating at pH 7.5 and separating steroids with acetic acid, 3-(cyclohexylamino)-1-propanesulfonic acid (CAPS), HEPES, or glycine BGE, adjusted to pH between 4.5 and 10.8. The results showed that with use of BGE solution at pH 10.8, the separation of steroids was not successful and the electroosmotic flow was high because of leakage of the phospholipid coating during preconditioning of the capillary with BGE solution. There was no phospholipid leakage with a BGE solution of pH 4.5, indicating that the protonated form of the functional groups of PS and HEPES participating in the attachment of the phospholipid coating to the capillary play an essential role in the success of the coating.     

Analysis of eleven iridoid glycosides by micellar electrokinetic capillary chromatography (MECC) and screening of plant samples by partial filling (MECC)-electrospray ionisation mass spectrometry

Of ammonium, lithium and sodium salts of dodecyl sulfate studied as surfactants in the separation of iridoid glycosides by micellar electrokinetic capillary chromatography (MECC), the last one gave the best results. Eleven neutral iridoid glycosides were separated by MECC with sodium dodecyl sulfate as surfactant, and the water–micelle partition coefficients of the compounds were calculated. The separation system was coupled via a coaxial sheath flow electrospray interface to a mass spectrometer, and the partial filling technique was used in the on-line analysis. Seven plant species belonging to five genera (Plantago, Veronica, Melampyrum, Succisa and Valeriana) were screened for the iridoid glycosides by the new method that was developed. The findings confirmed those of an earlier study on five of the iridoid glycosides. Some new iridoid glycosides were found in Plantago lanceolata, Veronica spicata and V. chamaedrys.     

Chiral separation of dansyl amino acids by capillary electrophoresis: Comparison of formamide andN-Methylformamide as background electrolytes

Summary Chiral separation of 12 dansyl amino acids has been achieved by capillary electrophoresis using -cyclodextrin dissolved inN-methylformamide or formamide. The viscosity and the dielectric constants of these two solvents are very different, giving them disimilar electrophoretic properties. Intense electroosmotic flow, high electrophoretic mobilities and high efficiency were achieved inN-methylformamide, but high chiral selector concentration was needed for sufficient resolution. In contrast, the separation of dansyl amino acids in formamide was characterized by longer analysis time and lower efficiency, but the resolution and selectivity of the separation were better and baseline separation could be achieved at lower -cyclodextrin concentrations.     

On-line coupled liquid chromatography-gas chromatography

On-line coupled liquid chromatography–gas chromatography (LC–GC) is a powerful technique that combines the best features of LC and GC and is ideal for the analysis of complex samples. This review describes the unique features of on-line coupled LC–GC. The different interfaces and evaporation techniques are presented, along with their advantages and disadvantages. Guidelines are given for selecting a suitable LC–GC technique and representative applications are noted.     

Pressurised hot water extraction-microporous membrane liquid-liquid extraction coupled on-line with gas chromatography-mass spectrometry in the analysis of pesticides in grapes

Pressurised hot water extraction-microporous membrane liquid-liquid extraction was coupled on-line with gas chromatography-mass spectrometry (PHWE-MMLLE-GC-MS) for the analysis of pesticides in grapes. MMLLE serves as a trapping step after PHWE. Water from PHWE is directed to the donor side of the membrane unit and the analytes are extracted to the acceptor solution on the other side. The role of MMLLE is to clean and concentrate the extract before on-line transfer to the GC via a sample loop and an on-column interface using partially concurrent solvent evaporation. The extraction conditions were investigated, and then the quantitative features such as linearity, limit of quantification (LOQ), extraction yield and enrichment factors. LOQs in the range 0.3-1.8 microg kg(-1) were achieved. Procymidone and tetradifon were found in the skins of the grapes. The results were in good agreement with those obtained by liquid-solid and ultrasonic extractions.     

Piperazine-based buffers for liposome coating of capillaries for electrophoresis

Anionic liposomes can be coated on fused-silica capillaries for electrophoresis in the presence of N-(hydroxyethyl)piperazine-N'-(2-ethanesulfonic acid) (HEPES) as background electrolyte (BGE) solution. In this work, the interaction of various compounds with zwitterionic and anionic phospholipid coatings was studied with HEPES at pH 7.4 as BGE solution. The chromatographic and electrophoretic behavior of three test sample solutions (anionic, cationic, and neutral) was investigated for evaluation of the phospholipid coatings. Our results show that hydrophobic interactions between analytes and the phospholipid coating are important for the migration of charged analytes. In addition, the performances of other piperazine-based buffers, i.e., N-(2-hydroxyethyl)piperazine-N'-(2-hydroxypropanesulfonic acid), piperazine-N,N'-bis(2-ethanesulfonic acid), and piperazine-N,N'-bis(hydroxypropane sulfonic acid), at pH 7.4, as liposome solvent and BGE solution were evaluated and compared with the performance of HEPES at pH 7.4. The anionic liposome solution comprised 80/20 mol% phosphatidylcholine/phosphatidylserine. A simple test solution was selected and the chromatographic and electrophoretic migration behavior of the analytes was evaluated. The results show that, in addition to HEPES, other piperazine-based buffers at pH 7.4 are suitable for coating of fused-silica capillaries with anionic liposomes.     

Cytochrome c–dimyristoylphosphatidylglycerol interactions studied by asymmetrical flow field-flow fractionation

Lipid membranes are well recognized ligands that bind peripheral and integral proteins in a specific manner and regulate their function. Cytochrome c (cyt c) is one of the partner peripheral protein that binds to the lipid membranes via electrostatic and hydrophobic interactions. In this study, asymmetrical flow field-flow fractionation (AsFlFFF) was used to compare the interactions of cyt c with the acidic phospholipid 1,2-dimyristoyl-sn-glycero-3-phospho-rac-glycerol (DMPG), oleic acid (OA), and sodium dodecyl sulfate (SDS). The influence of pH and the cyt c–lipid molar mass ratios were evaluated by monitoring the diffusion coefficients and particle diameter distributions obtained for the free and lipid-bound protein. The hydrodynamic particle diameter of cyt c (pI 10) was 4.1 nm at pH 11.4 and around 4.2 nm at pH 7.0 and 8.0. Standard molar mass marker proteins were used for calibration to obtain the molar masses of free cyt c and its complexes with lipids. AsFlFFF revealed the binding of cyt c to DMPG and to OA to be mainly electrostatic. In the absence of electrostatic interactions, minor complex formation occurred, possibly due to the extended lipid anchorage involving the hydrophobic cavity of cyt c and the hydrocarbon chains of DMPG or SDS. The possibility of the formation of the molten globule state of cyt c, induced by the interaction between cyt c and lipids, is discussed.Electronic Supplementary Material Supplementary material is available for this article at