Development and Validation of LC-ESI-MS/MS Method for the Determination of Alfuzosin in Human Plasma

Journal of Analytical Chemistry - A new liquid chromatography-electrospray ionization tandem mass spectrometry (LC-ESI-MS/MS) method has been developed and validated for alfuzosin quantification in...     

Analysis of carbohydrates using different quaternized polystyrene-divinylbenzene particles and pulsed amperometric detection

Summary This paper reports on the use of a polymer-based, strong anion-exchange stationary phase for rapid, selective and sensitive analysis of physiological important mono-, di- and oligosaccharides by high-performance anion-exchange chromatography (HPAEC) with pulsed amperometric detection (PAD) under alkaline conditions. The adsorbent was obtained by direct nitration of 3 and 5 μm, spherical non-porous highly cross-linked, styrene-divinylbenzene copolymer (PS-DVB) beads, followed by reduction of superficially introduced nitro groups with nascent hydrogen and quaternization of the resultant amino groups with iodomethane. Extended exposure to high pressure and strong alkaline conditions did not have any untoward effect on mechanical stability and chromatographic performance. A comparison of the 3 and 5 μm beads showed, that the synthesized 3 μm highly cross-linked PS-DVB particles are the preferred phases for the separation of monosaccharides and the 5 μm particles are preferable for the separation of oligosaccharides. To demonstrate the suitability for the analysis of complex samples, the optimized and validated system was used for the determination of glucose, fructose and sucrose in apple juice and other soft drinks such as Coca Cola. Finally, analysis within a few minutes without sample pretreatment down to a lower limit of detection of 0.174–0.504 μg mL⁻¹ at a linearity with R²>0.994 and a repooducibility higher than 98% further confirmed the efficiency of these polymeric sorbents.     

Schwarz method justification of a coupling between finite elements and integral representation for Maxwell exterior problem

We are interested in the resolution of an exterior Maxwell problem in 3D using a coupling between finite elements and integral representation. This strategy is interpreted as a Schwarz method which suggests a preconditioner for Krylov solvers. Numerical results confirm the relevance of the resolution scheme.     

Radiation vulcanization of NR/SBR composite enhanced with different polyfunctional monomers

The effect of different polyfunctional monomers (PFMs) as enhancing agents on the properties of natural rubber/styrene-butadiene rubber blend reinforced with 40 (phr) part per hundred part of rubber, by weight of HAF carbon black and vulcanized with gamma irradiation was investigated. The coagents N,N’ methylene diacrylamide (MDA), trimethylol propane-trimethacrylate (TMPTMA) and trimethylol-methane tetraacrylate (TMMTA) were used at a constant content of 5 phr. The physico-chemical properties such as tensile strength, tensile modulus at 100 % elongation, elongation at break, gel fraction and swelling number were studied. The results indicated that the properties are greatly improved by PFMs at lower doses. TMMTA as coagent is more effective than TMPTMA and MDA.     

Preparation and evaluation of monolithic poly(N-vinylcarbazole-co-1,4-divinylbenzene) capillary columns for the separation of small molecules

Short-term polymerization or the so-called low-conversion polymerization was applied for the preparation of N-vinylcarbazole (NVC) and 1,4-divinylbenzene (DVB) monolithic capillary columns. The synthesis was carried out by thermally initiated free radical copolymerization under the influence of inert micro- (toluene) and macroporogen (1-decanol) and α,α′-azoisobutyronitrile (AIBN) as radical initiator. The morphological and porous properties were studied by scanning electron microscopy (SEM), nitrogen adsorption, and mercury intrusion porosimetry (MIP). The copolymerization process was studied by monomer conversion measurements. This approach led to increased porosity and specific surface area. A specific surface area above 400 m²/g of the monolith and a distinct bimodal pore size distribution were obtained. The chromatographic performance was determined in terms of theoretical plate heights and number of theoretical plates. The lowest plate height value was found to be 3.9 μm (corresponding to ≈256,000 plates per meter) applying methylparaben utilizing an 80 mm?×?0.2 mm i.d. monolithic capillary. The developed NVC/DVB monolithic supports showed high separation efficiency towards small molecules, which was exemplified applying reversed-phase (RP) separation of alkylbenzenes, beta-blockers, flavanoids, parabens, and phenones. The loading capacity was analyzed for isocratic separation of seven alkylbenzenes and was found to be up to 77 ng total mass of alkylbenzenes. Furthermore, a long-term stability test of 1,000 consecutive runs was performed and resulted in a maximum variance of 0.97, 0.85, and 0.16 % RSD for resolution, peak width at half height, and retention times, respectively. The material was proven to have a high permeability of 1.11E?14 m², applying water as a mobile phase.     

Synthesis of magnetite nanoparticles coated with polyvinyl alcohol for hyperthermia application

Journal of Thermal Analysis and Calorimetry - One of the main challenges in hyperthermia treatment is how to improve the heating performance of nanoparticles with high specific loss power (SLP). To...     

Harmonic and intermodulation distortions and noise associated with two-tone modulation of high-speed semiconductor lasers

We present results of modeling and simulation of the harmonic and intermodulation distortions as well as the intensity noise of high-speed semiconductor lasers under two-tone modulation. Multiple quantum-well lasers are considered, which are characterized by large differential gain and a modulation bandwidth of about 25GHz. The study is based on the rate equation model of semiconductor lasers excited by injection current with two sinusoidal tones separated by a radio frequency. The modulated laser signal is modeled in both the time and frequency domains. The time domain characteristics include the fluctuating waveform, while the frequency domain characteristics include the frequency spectrum of the relative intensity noise (RIN), carrier-to-noise ratio, modulation response, harmonic distortion, and the second- and third-order intermodulation distortions (IMD2 and IMD3). The analysis is performed for three frequencies of 5, 15, and 24 GHz, which are, respectively, lower, comparable, and higher than the laser relaxation frequency. The range of the modulation depth covers the regimes of small and large-signal modulation. We show that both RIN and IMD3 of two-modulated laser are minimum when the modulation frequency is 5GHz, and maximum when the modulation frequency is 24 GHz. The second-order harmonic distortion, IMD2, and IMD3 values are larger in the vicinity of relaxation oscillations and increase with the modulation index, especially under large-signal modulation.     

Sensitivity‐Enhanced 13C‐NMR Spectroscopy for Monitoring Multisite Phosphorylation at Physiological Temperature and pH

Abundant phosphorylation events control the activity of nuclear proteins involved in gene regulation and DNA repair. These occur mostly on disordered regions of proteins, which often contain multiple phosphosites. Comprehensive and quantitative monitoring of phosphorylation reactions is theoretically achievable at a residue‐specific level using ¹H‐¹⁵N NMR spectroscopy, but is often limited by low signal‐to‐noise at pH>7 and T>293 K. We have developed an improved ¹³Cα‐¹³CO correlation NMR experiment that works equally at any pH or temperature, that is, also under conditions at which kinases are active. This allows us to obtain atomic‐resolution information in physiological conditions down to 25 μm . We demonstrate the potential of this approach by monitoring phosphorylation reactions, in the presence of purified kinases or in cell extracts, on a range of previously problematic targets, namely Mdm2, BRCA2, and Oct4.     

Rate of convergence for ergodic continuous Markov processes: Lyapunov versus Poincaré

We study the relationship between two classical approaches for quantitative ergodic properties: the first one based on Lyapunov type controls and popularized by Meyn and Tweedie, the second one based on functional inequalities (of Poincaré type). We show that they can be linked through new inequalities (Lyapunov-Poincaré inequalities). Explicit examples for diffusion processes are studied, improving some results in the literature. The example of the kinetic Fokker-Planck equation recently studied by Hérau and Nier, Helffer and Nier, and Villani is in particular discussed in the final section.     

Synthesis,characterization, speciation and biological studies on metal chelates of 1-benzoyl(1,2,4-triazol-3-yl)thiourea

Proton-ligand association constants of 1-benzoyl(1,2,4-triazol-3-yl)thiourea (BTTU) and its complex formation constants with some bivalent metal ions Ni(II), Co(II), Mn(II), Zn(II), and Cu(II), have been determined potentiometrically in 50% EtOH–H₂O and 0.1 M NaNO₃. The complexes formed in solution have a stoichiometry of 1:1 and 1:2 [M:L], where M represents the metal ion and L the BTTU ligand. The corresponding thermodynamic parameters are derived and discussed. The complexes are stabilized by enthalpy changes and the results suggest that complexation is an enthalpy-driven process. The effects of metal ion, ionic radius, electronegativity, and nature of ligand on the formation constants are discussed. The formation constants of the complexes with 3d transition metals follow the order Mn²⁺ < Co²⁺ < Ni²⁺ < Cu²⁺ > Zn²⁺. The metal complexes were synthesized and characterized by elemental analyses, conductance, IR, ¹H NMR, and magnetic measurements. The low magnetic moment of 0.11 BM for the Cu(II) complex is suggestive of dimerization through Cu–Cu interaction. The concentration distribution diagrams of the complexes were evaluated. The ligands and their metal complexes have been screened in vitro against some bacteria and fungi.