New organoruthenium metallates containing ferrocenecarboxalidine thiosemicarbazones and their nucleic acid/albumin binding and in vitro cytotoxicity

A string of four new hetero binuclear Ru(III) complexes of ferrocenecarboxaldehyde-4(N)-substituted thiosemicarbazones were synthesized and characterized by various spectral (infrared, ultraviolet–visible, Electron Paramagnetic Resonance (EPR) and High Resolution Mass Spectrometry (HR-MS) techniques. The binding abilities of the ligands/complexes with nucleic acid (calf thymus DNA, CT-DNA) and bovine serum albumin (BSA) were analyzed by absorption and emission titration methods. The complexes exhibited better DNA binding affinity than their parent ligands. The interaction with CT-DNA was found to be intercalative and with BSA static quenching mechanism was observed. All the synthesized Ru(III) complexes were subjected to study their in vitro cytotoxicity against MCF-7 (human breast cancer) and HT-29 (human colon cancer) cell lines. Among the four complexes, complex 3 [RuCp (FF-etsc)PPh₃]Cl exhibited the highest cytotoxicity in MCF-7 cells and complex 4 [RuCp (FF-ptsc)PPh₃]Cl was the most active on HT-29 cells.     

Composition and spectral studies of polyaniline salts

Five different polyaniline salts have been prepared by chemical polymerization of aniline in aqueous solution of different acids. The polyaniline base was obtained from the corresponding polyaniline salt by dedoping using aqueous ammonium hydroxide solution. Electron paramagnetic, electronic absorption, infrared spectral and conductivity measurements have been performed on the polyaniline salts and polyaniline bases. This composition and the extent of dopant in polyaniline salt systems have been determined. There is no definite correlation between the conductivity and the stoichiometric ratio between the polyaniline base and the acid, and also the spin concentration.     

Creeping flow about a slightly deformed sphere

The problem of slow streaming flow of a viscous incompressible fluid past a spheroid which departs but little in shape from a sphere with mixed slip-stick boundary conditions, is investigated. The explicit expression for the stream function is obtained to the first order in the small parameter characterising the deformation. The case of an oblate spheroid is considered as a particular example and the force on this non-spherical body is evaluated. It is found that the parameter ₁, which arises in connection with the boundary condition, has significant effect upon the hydrodynamic force. In fact, it is shown that, the force is a quadratic function of this parameter up to the first order of deformation. Also, it is observed that the drag in the present case is less than that of the Stokes resistance for a slightly oblate spheroid. Some other special cases are also deduced from the present result. A brief discussion of the results to other body shapes is presented.     

Spectral and thermal characterization of polyaniline–oxalic acid salt

Polyaniline–oxalic acid salts were prepared at 5 and 30°C by chemical polymerization of aniline using different concentration of oxalic acid. Polyaniline base was obtained from the corresponding polyaniline salt by dedoping using aqueous ammonium hydroxide solution. Conductivity measurements, elemental analysis, Infrared, electronic absorption, electron paramagnetic resonance spectral, and thermogravimetric analysis were performed on the polyaniline salts and bases. Composition and the extent of dopant in polyaniline salt systems where determined. The value of composition of polyaniline: oxalic acid is 4: 1.6 and the polymer yield is around 66%. The value of conductivity, polymer yield and composition of polyaniline–oxalic acid salt is independent of concentration of oxalic acid used and also the synthesis temperature. The results are compared with polyaniline–hydrochloride salt prepared by chemical polymerization. The conductivity of polyaniline–oxalic acid salt is three orders of magnitude lower than that of polyaniline-hydrocholoride salt. © 1995 John Wiley & Sons, Inc.     

A metal nanoparticle-based supramolecular approach for aqueous biphasic reactions

beta-cyclodextrin immobilized on Pd nanoparticles was successfully employed as an efficient phase-transfer catalyst in aqueous biphasic hydrogenation reactions.     

Preparation of polyaniline‐sulfate salt ­by emulsion and aqueous ­polymerization pathway without using ­protonic acid

Aniline was polymerized directly into polyaniline‐sulfate salt without using protonic acid in this work. Polyaniline‐sulfate salt was prepared by emulsion and aqueous polymerization pathways. The dopant i.e. sulfate ion in polyaniline‐sulfate salt was generated from ammonium persulfate which was used for oxidizing aniline. Ammonium persulfate acts both as oxidizing agent as well as protonating agent in the polymerization process of aniline to polyaniline salt. The efficiency of oxidizing and protonating power of ammonium persulfate is increased by the use of surfactant. The activity of ammonium persulfate is further increased by the use of sulfuric acid as protonic acid. It may be necessary to consider the effect of sulfate ion which is generated during the oxidation process of aniline in the chemical polymerization of aniline to polyaniline salt by ammonium persulfate either aqueous or emulsion polymerization pathway in the presence of protonic acid/functionalized protonic acid. Copyright © 2001 John Wiley & Sons, Ltd.     

Biosynthesis of TiO2 Nanoparticles Using Edible Mushroom (Pleurotus djamor) Extract: Mosquito Larvicidal,Histopathological, Antibacterial and Anticancer Effect

Journal of Cluster Science - The titanium dioxide nanoparticles (TiO2NPs) were synthesized by the aqueous extract from P. djamor. The UV–Vis spectrum of TiO2NPs showed maximum absorption at...     

Visual detection of Al ions using conjugated copolymer-ATP supramolecular complex

A colorimetric Al³⁺ sensor based on fluorescence recovery of a conjugated copolymer-ATP complex is proposed. An optimized ratio of two polythiophene (PT) monomers is utilized to synthesize copolymer (CP) that yielded maximized colorimetric response for Al³⁺ in deionized (DI) and tap water. The electrostatic disassembly of CP-ATP upon addition of Al³⁺ led to an evident visual color change. The lowest concentration of Al³⁺ for naked eye observation is around 4 μM, which is below the threshold levels in drinking water according to European Economic Community (EEC) standard. Besides, the proposed assay showed a similar response to Al³⁺ in tap water. The proposed methodology showed selective and sensitive detection for Al³⁺ in analytically relevant concentration ranges without involving sophisticated instrumentation, illustrating the applicability for on-site drinking water monitoring.     

Sulfonated rGO from waste dry cell graphite rod and its hybrid with PANI as electrode for supercapacitor

Journal of Solid State Electrochemistry - Development of high-performance energy storage devices is a vital research area to meet the present-day energy demand. In the work carried toward the...     

Use of surfactant in aniline polymerization with TiO2 to PANI-TiO2 for supercapacitor performance

Polyaniline sulphate salt titanium dioxide composite (PANI-H₂SO₄·TiO₂) was synthesized by chemical in situ polymerization of aniline in the presence of TiO₂. The effect of anionic surfactant (sodium lauryl sulphate) in this reaction was also assessed. During the polymerization reaction, sodium lauryl sulphate (SLS) is converted to dodecyl hydrogen sulphate (DHS) in the presence of acidic medium and gets doped onto polyaniline along with sulphuric acid dopant, i.e. formation of polyaniline-sulphate-dodecyl hydrogen sulphate-titanium dioxide composite (PANI-H₂SO₄-DHS·TiO₂). In the PANI-H₂SO₄-DHS·TiO₂ composite, the presence of DHS is confirmed by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD) and energy-dispersive X-ray analysis (EDAX) and TiO₂ is confirmed by XRD and EDAX results. In PANI-H₂SO₄-DHS·TiO₂ system, the nanoparticle of TiO₂ (10–20 nm) is uniformly embedded on nanofibres (20–60 nm) of PANI-H₂SO₄-DHS, and some part of PANI-H₂SO₄-DHS·TiO₂ forms core–shell morphology, wherein TiO₂ is in core and PANI-H₂SO₄-DHS in shell forms. Stability of PANI-H₂SO₄-DHS increases due to the incorporation of stable TiO₂. Utility of PANI-TiO₂ composite was carried out in supercapacitor cell system by performing cyclic voltammetry, galvanostatic charge–discharge and electrochemical impedance spectroscopic techniques in 1 M H₂SO₄ solution. Very low values of solution resistance, charge transfer resistance and time constant are obtained between 0.2 and 0.6 V. Initial specific capacitance values for the cell carried out at low and high current densities are found to be 280 and 205 F g^?1, respectively, and after 1,700 charge–discharge cycles, its retention in the specific capacitance values is found to be the same (65–66 %) with coulombic efficiency of 98–100 %. A capacitor can work even at a high discharge rate. The efficiency of oxidizing and doping power increases with the use of a surfactant. Moreover, the use of a long chain surfactant dopant containing polyaniline as an electrode material plays an important role to increase the performance of the supercapacitor by allowing the electrolyte to easily enter and come out from PANI electrodes.