Preparation of hydrophobic and conductive cotton fabrics using multi-wall carbon nanotubes by the sol–gel method

Journal of Sol-Gel Science and Technology - In this paper, a simple method is presented for making a conductive and hydrophobic cotton fabric using a multi-walled carbon nanotube (MWCNT). The...     

Coated wire silver-ion selective electrode based on a N,N'-bis(2-thienylmethylene)-1,2-diaminobenzene.

A novel membrane coated platinum-wire electrode (MCPWE) based on N,N'-bis(2-thienylmethylene)-1,2-diaminobenzene (BTMD) for highly selective determination of Ag+ ion has been developed. The influences of membrane composition and pH on the potentiometric responses of electrode were investigated. The potentiometric responses are independent of the pH of the test solution in the range of 5.0 - 9.0. The electrode shows a linear response for Ag+ ion over the concentration range of 1.0 x 10(-60 to 1.0 x 10(-1) M with a lower detection limit of 6.0 x 10(-7) M. The electrode possesses a Nernstian slope of 59.7 mV decade(-1) and a fast response time of < or = 17 s and can be used for at least 2 months without any observable deviation. The proposed electrode displayed very good selectivity for Ag+ ion with respect to NH4+ and alkali, alkaline earth and some common transition metal ions. The practical utility of the electrode has been demonstrated by its use as the indicator electrode in the potentiometric titration of an AgNO3 solution with a NaI solution and in determination of the silver content of a developed radiological film.     

Crystal and Molecular Structures of Mononuclear Coordinated Copper(I) Complexes with Thio-triazole and Thio-triazine based Schiff base Ligands

Reaction of 4-amino-5-methyl-1,2,4-triazol-3(2H)-thione (AMTT) and 4-amino-6-methyl-3-thio-3,4-dihydro-1,2,4-triazin-5(2H)-one (AMTTO) with 2-hydroxybenzaldehyde led to the synthesis of corresponding Schiff base ligands [(Z)-4-((2-hydroxybenzylidene)amino)-3-methyl-1H-1,2,4-triazole-5(4H)-thione ( L1 ) and (Z)-4-((2-hydroxybenzylidene)amino)-6-methyl-3-thioxo-3,4-dihydro-1,2,4-triazin-5(2H)-one ( L2 )]. Treatment of synthesized Schiff base ligands with CuCl provided the complexes [Cu(L1)₃Cl] ( 1 ) and [Cu(L2)₂Cl] ( 2 ). Synthesized complexes were characterized by elemental analyses, IR spectroscopy and X-ray diffraction studies. Complex 1 consists of a metal ion coordinated with one chloride ion and three Schiff base ligands via sulfur atoms in a distorted tetrahedral environment, whereas 2 consists of a metal ion coordinated with one chloride ion and two sulfur atoms from two different Schiff base ligands in a trigonal planar arrangement. Crystal data for 1 at –153 °C revealed an orthorhombic space group Fdd2, a = 34.8088(7), b = 33.8156(8), c = 11.6142(2) Å, Z = 16, R₁ = 0.0357; for 2 at –178 °C the symmetry was triclinic, space group P1 , a = 7.27520(10), b = 15.4620(2), c = 23.7985(4) Å, α = 72.1964(13), β = 86.5208(12), γ = 89.8597(11)°, Z = 4, R₁ = 0.0359.     

A study of the electrochemical behavior of an oxadiazole derivative electrodeposited on multi-wall carbon nanotube-modified electrode and its application as a hydrazine sensor

In this study, an oxadiazole multi-wall carbon nanotube-modified glassy carbon electrode (OMWCNT−GCE) was used as a highly sensitive electrochemical sensor for hydrazine determination. The surface charge transfer rate constant, k _s, and the charge transfer coefficient, α, for electron transfer between GCE and electrodeposited oxadiazole were calculated as 19.4 ± 0.5 s⁻¹ and 0.51, respectively at pH = 7.0. The obtained results indicate that hydrazine peak potential at OMWCNT−GCE shifted for 14, 109, and 136 mV to negative values as compared with oxadiazole-modified GCE, MWCNT−GCE, and activated GCE surface, respectively. The electron transfer coefficient, α, and the heterogeneous rate constant, k′, for the oxidation of hydrazine at OMWCNT−GCE were also determined by cyclic voltammetry measurements. Two linear dynamic ranges of 0.6 to 10.0 μM and 10.0 to 400.0 μM and detection limit of 0.17 μM for hydrazine determination were evaluated using differential pulse voltammetry. In addition, OMWCNT−GCE was shown to be successfully applied to determine hydrazine in various water samples.

     

A study of the electrochemical behavior of an oxadiazole derivative electrodeposited on multi-wall carbon nanotube-modified electrode and its application as a hydrazine sensor

In this study, an oxadiazole multi-wall carbon nanotube-modified glassy carbon electrode (OMWCNT?GCE) was used as a highly sensitive electrochemical sensor for hydrazine determination. The surface charge transfer rate constant, k _s, and the charge transfer coefficient, ??, for electron transfer between GCE and electrodeposited oxadiazole were calculated as 19.4?±?0.5?s^?1 and 0.51, respectively at pH?=?7.0. The obtained results indicate that hydrazine peak potential at OMWCNT?GCE shifted for 14, 109, and 136?mV to negative values as compared with oxadiazole-modified GCE, MWCNT?GCE, and activated GCE surface, respectively. The electron transfer coefficient, ??, and the heterogeneous rate constant, k??, for the oxidation of hydrazine at OMWCNT?GCE were also determined by cyclic voltammetry measurements. Two linear dynamic ranges of 0.6 to 10.0???M and 10.0 to 400.0???M and detection limit of 0.17???M for hydrazine determination were evaluated using differential pulse voltammetry. In addition, OMWCNT?GCE was shown to be successfully applied to determine hydrazine in various water samples.     

Preconcentration of copper with dithizone-naphthalene for subsequent determination by atomic absorption spectrometry

A simple and convenient method for the separation and preconcentration of copper from aqueous samples has been developed. The procedure is based on the chemical sorption of copper(II) onto a column packed with immobilized dithizone on microcrystalline naphthalene. The trapped copper is eluted with 10 mL of 4 M nitric acid and determined by flame atomic absorption spectrometry. A preconcentration factor of 200 was obtained for a volume of 2 L. The relative standard deviation for the determination of 5 and 10 μg/L copper was 2.2 and 1.7%, respectively. The procedure was successfully applied to the determination of copper in water and alloy samples. The accuracy was assessed through the analysis of certified reference materials or recovery experiments. The text was submitted by the authors in English.     

Simultaneous determination of adrenaline,uric acid,and cysteine using bifunctional electrocatalyst of ruthenium oxide nanoparticles

In this study, ruthenium oxide nanoparticles were electrochemically deposited on the surface of a glassy carbon electrode (RuON-GCE). Electrochemical studies indicate that a modified electrode (RuON-GCE) plays the role of an excellent bifunctional electrocatalyst for the oxidation of adrenaline (AD) and uric acid (UA) in two different potentials. The charge transfer coefficient (α) and the heterogeneous charge transfer rate constant (k′) between the analytes and the electrodeposited nanoparticles were determined using cyclic voltammetry experiments. Through a different pulse voltammetric (DPV) method, the plot of the electrocatalytic current versus AD and UA concentrations emerged to be constituted of two linear segments with different sensitivities. Furthermore, the detection limits of AD and UA were estimated. In DPV, RuON-GCE could separate the oxidation peak potentials of AD, UA, and cysteine (Cys) present in the same solution though, at the bare GCE, the peak potentials were indistinguishable. Finally, the modified electrode activity was studied for the electrocatalytic determination of AD in an injection solution and UA in a human urine sample. The results were found satisfactory.     

Differential pulse voltammetric simultaneous determination of noradrenalin and acetaminophen using a hematoxylin biosensor

A highly efficient noradrenalin (NA) biosensor was fabricated on the basis of hematoxylin electrodeposited on a glassy carbon electrode, GCE. The cyclic voltammetric responses of the hematoxylin biosensor at various scan rates, which were obtained in a 0.25 mmol L⁻¹ NA solution, showed the characteristic shape typical of an EC_cat process. The kinetic parameters such as electron transfer coefficient, α, the catalytic electron transfer rate constant, k′, and the standard catalytic electron transfer rate constant, k⁰, for oxidation of NA at the hematoxylin biosensor surface were estimated using cyclic and RDE voltammetry. The peaks of differential pulse voltammetric (DPV) for NA and acetaminophen (AC) oxidation at the hematoxylin biosensor surface were clearly separated from each other when they co-exited in the physiological pH (pH 7.0). It was, therefore, possible to simultaneously determine NA and AC in the samples at a hematoxylin biosensor. Linear calibration curves were obtained for 5.0 × 10⁻¹ to 65.40 μmol L⁻¹ and 65.40-274.20 μmol L⁻¹ of NA, and for 12.00-59.10 μmol L⁻¹ and 59.10-261.70 μmol L⁻¹ of AC. The sensitivities of the biosensor to NA in the absence and presence of AC were found virtually the same, which indicates the fact that the electrocatalytic oxidation processes of NA are independent of AC and, therefore, simultaneous or independent measurements of the two analytes (NA and AC) are possible without any interference. The results of 16 successive measurements show an average voltammetric peak current of 1.13 ± 0.03 μA for an electrolyte solution containing 5.00 μmol L⁻¹ NA. The hematoxylin biosensor has been satisfactorily used for the determination of NA and AC in pharmaceutical formulations. The results obtained, using the biosensor, are in very good agreement with those declared in the label of pharmaceutical inhalation products.     

Speciation analysis of mercury in water samples by cold vapor atomic absorption spectrometry after preconcentration with dithizone immobilized on microcrystalline naphthalene

Trace amounts of inorganic mercury (Hg²⁺) and methylmercury cations (MeHg²⁺) were adsorbed quantitatively from acidic aqueous solution onto a column packed with immobilized dithizone on microcrystalline naphthalene. The trapped mercury was eluted with 10 ml of 7 mol L^–1 hydrochloric acid solution. The Hg²⁺ was then directly reduced with tin (II) chloride, and volatilized mercury was determined by cold vapor atomic absorption spectrometry (CVAAS). Total mercury (Hgt) was determined after decomposition of MeHg⁺ into Hg²⁺. Hg²⁺ and MeHg⁺ cations were completely recovered from the water with a preconcentration factor of 200. The relative standard deviation obtained for eight replicate determinations at a concentration of 0.3 g L^–1 was 1.8%. The procedure was applied to analysis of water samples, and the accuracy was assessed via recovery experiment.