Stress development during drying of calcium carbonate suspensions containing carboxymethylcellulose and latex particles

Stress development during drying of coatings produced from aqueous dispersions of calcium carbonate particles in the presence and absence of organic binders was studied using a controlled-environment stress apparatus that simultaneously monitored drying stress, weight loss, and relative humidity. Specifically, the influence of two organic binders on drying stress evolution was investigated: (1) carboxymethylcellulose, a water-soluble viscosifying aid, and (2) a styrene-butadiene latex emulsion of varying glass transition temperature. The stress histories exhibited three distinct regions. First, a period of stress rise was observed, which reflected the capillary tension exerted by the liquid on the particle network. Second, a maximum stress was observed. Third, it was followed by a period of either stress decay or rise depending on the organic species present. Significant differences in stress histories were observed between coatings containing soluble and nonsoluble binders. Maximum drying stresses (sigmamax) of 0.2-0.5 MPa were observed for coatings produced from pure calcium carbonate or calcium carbonate-latex suspensions, whereas coatings with carboxymethylcellulose exhibited substantially higher sigmamax values of 1-2 MPa. Upon drying, these coatings were quite hygroscopic, such that cyclic variations in relative humidity induced large cyclic changes in residual stress.     

Particle-induced phase separation in mixed polymer solutions

The influence of added colloidal particles on the phase separation of mixed aqueous polymer solutions is investigated. Two types of particles (polystyrene latex or silica) and different combinations of segregating polymers (dextran of varying molar mass combined with poly(ethylene oxide) (PEO) of varying molar mass, or Ucon, a copolymer of ethylene oxide and propylene oxide) were used. All systems displayed particle-induced instability effects, but the extent of the effect varied strongly between the various combinations and with the amount of added salt. Very large instability effects were seen in certain mixtures. Two mechanisms, both relying on the adsorption of at least one of the polymers to the particle surface, seem to operate. Close to the cloud-point curve of the particle-free polymer1/polymer2/water mixture, adsorption of PEO or Ucon to the particles gives rise to a capillary-induced phase separation. Close to the dextran/water axis of the phase diagram, the adsorbing polymer gives rise to a surface modification of the particles, which then interacts repulsively with the surrounding dextran solution.     

Gels of hydrophobically modified ethyl(hydroxyethyl) cellulose cross-linked by amylose: effects of hydrophobe architecture

Previous work has shown that amylose (AM) can cross-link hydrophobically modified polymers by inclusion complexation, whereby thermoreversible cold-setting gels are formed. Here we investigate the complexation of AM with different samples of hydrophobically modified ethyl(hydroxyethyl) cellulose (HMEHEC), distinguished by differences in the architecture of the hydrophobes (the hydrophobic side chains). All hydrophobes, except one, were based on linear alkyl chains, but with varying chain lengths (C12-C14). In addition, some samples contained short hydrophilic "spacers", consisting of 2-5 ethylene oxide units, between the alkyl chains and the EHEC backbone. Gels of varying strength were obtained for the different AM/HMEHEC samples. The alkyl chain length seemed to be the major factor affecting the gel strength, with longer alkyl chains giving stronger gels. For similar alkyl chain lengths, stronger gels were obtained when a spacer was present. Addition of AM caused a small increase of the cloud points of HMEHECs with C14 hydrophobes in water. Time-dependent effects and effects of the sample preparation procedure were also investigated. The reversibility of the gelation with respect to shear was confirmed. A gel destroyed by added surfactant was shown to reform on removal of the surfactant by dialysis.     

Syntheses and spectroscopic properties of energy transfer systems based on squaraines

The purpose of this project was to prepare fluorescent dyes that could absorb energy at relatively short wavelengths, and fluoresce in the near-IR region. To achieve this, copper- and palladium-mediated C-N couplings were used to prepare the ‘cassettes’, i.e the carbazole derivative 3b and the carbazole-, phenothiazine-, and phenoazine-squaraines 4b-d. These compounds have carbazole, phenothiazine, and phenoazine donor-components that absorb around about 300-320 nm, and squaraine acceptor-parts that fluoresce in the range 650-700 nm. The efficiencies of energy transfer from the donor to the acceptor, and the overall quantum yields of the cassettes were determined.     

An FTIR study of the surface chemistry of the dynamic Si(100) surface during etching in alkaline solution

In situ FTIR spectroscopy has been used in the attenuated total reflectance (ATR) mode to investigate the surface chemistry of etching Si(100) surfaces in aqueous KOH. The effect of solution concentration and electrode potential on the Si-H vibrations has been explored and the experimental results compared with density functional theory calculations. In addition. the kinetics of surface passivation of n-Si(100) has been investigated using FTIR spectroscopy.     

Time-resolved and steady-state fluorescence spectroscopic studies of the human lens with comparison to argpyrimidine,pentosidine and 3-OH-kynurenine

The intrinsic fluorescence from the human lens on excitation in the UV region, referred to as blue lens autofluorescence, increases with age or in the presence of diabetes. The present study reveals that the relative contribution of compounds responsible for the blue autofluorescence appears to be a constant with age. Three potential candidates for the blue fluorescence were also studied with respect to fluorescence spectroscopic properties. These were argpyrimidine and pentosidine, both advanced glycation end products, and 3-hydroxykynurenine (3-OH-kynurenine), a photooxidative derivative of tryptophan. It was shown that the spectral properties of argpyrimidine and pentosidine are compatible with the observed blue fluorescence of the human lens, whereas the fluorescence from 3-OH-kynurenine is negligible.     

Mixed solutions of an associating polymer with a cleavable surfactant

Mixtures of hydrophobically modified hydroxyethyl cellulose (HMHEC) and alkali-sensitive cleavable betaine ester surfactants have been studied by viscometry, 1H NMR, absorbance measurements, and birefringence determinations. Before the hydrolysis, the surfactants behaved as conventional nondegradable surfactants in terms of the effect on the viscosity of increasing surfactant concentration. As the surfactants were hydrolyzed, systems with time-dependent viscosity were obtained. The viscosity either decreased monotonically or went through a maximum as a function of time, depending on the initial surfactant concentration. Different surfactant chain lengths gave rise to different viscosity profiles. The rate of hydrolysis, and thus the time-dependency of the surfactant concentration, could be controlled by changing the pH of the solution.     

Hydrophobicity and counterion effects on the binding of ionic surfactants to uncharged polymeric hydrogels

Gel swelling experiments have been used to study the binding of ionic surfactants to a series of nonionic alkylacrylamide hydrogels of increasing hydrophobicity. The binding of hexadecyl trimethylammonium (C16TA+) to uncharged gels is sensitive to both the hydrophobicity of the gel and the counterion to the surfactant. There is a minimum hydrophobicity threshold below which binding of the surfactant does not occur, and this is influenced by the counterion to the surfactant. The surfactant concentration at the onset of binding, the critical association concentration (cac), decreases with increasing gel hydrophobicity. The maximum swelling of the gel (at intermediate network hydrophobicity) increases in the order of the Hofmeister series of anions, bromide (Br-) < chloride (Cl-) < acetate (Ac-). At higher gel hydrophobicity, differences in swelling are no longer observed on changing the counterion. A minimum hydrophobicity threshold was also found for the binding of the anionic surfactants sodium dodecyl sulfate (SDS) and sodium dodecyl-di(ethylene oxide)-sulfate (SD-(EO)2-S). Differences in the swelling behavior with network hydrophobicity are explained in terms of the degree of saturation of the gel with surfactant at the cmc.