Portable single-sided NMR measurements at variable temperatures: Implementation of a thermo-controlled device and application to the heating of bread dough

A temperature control unit was implemented to vary the temperature of samples studied on a commercial Mobile Universal Surface Explorer nuclear magnetic resonance (MOUSE-NMR) apparatus. The device was miniaturized to fit the maximum MOUSE sampling depth (25 mm). It was constituted by a sample holder sandwiched between two heat exchangers placed below and above the sample. Air was chosen as the fluid to control the temperature at the bottom of the sample, at the interface between the NMR probe and the sample holder, in order to gain space. The upper surface of the sample was regulated by the circulation of water inside a second heat exchanger placed above the sample holder. The feasibility of using such a device was demonstrated first on pure water and then on several samples of bread dough with different water contents. For this, T1 relaxation times were measured at various temperatures and depths and were then compared with those acquired with a conventional compact closed-magnet spectrometer. Discussion of results was based on biochemical transformations in bread dough (starch gelatinization and gluten heat denaturation). It was demonstrated that, within a certain water level range, and because of the low magnetic field strength of the MOUSE, a linear relationship could be established between T1 relaxation times and the local temperature in the dough sample.     

Compositionally modulated Fermi surfaces, structured diffuse scattering and ternary derivatives of 1T-TaS2

Ternary derivatives of 1T-TaS₂ have been synthesized and the variation in the highly structured diffuse intensity distributions characteristic of such materials carefully monitored to investigate the effect that such substitution has upon the band structures and Fermi surfaces (FSs) of the materials. Removal of d electrons via the replacement of Ta ions with lower valent transition metal ions leads to a systematic increase in the radii of the characteristic structured diffuse intensity distribution. Extended Hückel tight binding calculations of the FSs of the doped samples are carried out and used to predict possible nesting wave-vectors. The results are in reasonably good agreement with the radii of the experimentally observed diffuse intensity distributions.     

一个新的杆状病毒凋亡抑制基因的克隆及鉴定

缺失功能性ｐ３５基因的苜蓿尺蠖核形多角体病毒（ＡｃＮＰＶ）突变体（ｖΔＰ３５Ｋ／ｐｏｌ＋）感染草地夜蛾细胞（Ｓｆ９和Ｓｆ２１）［１］及海灰翅夜蛾细胞（ＳＬ２）［２］时，引起细胞凋亡，从而使病毒的感染流产．我们发现海灰翅夜蛾核形多角体病毒（ＳｌＮＰＶ）...     

Evaluation of a single-monochromator diode array spectroradiometer for sunbed UV-radiation measurements

The suitability of a new technology single-monochromator diode array spectroradiometer for UV-radiation safety measurements, in particular for sunbed measurements, was evaluated. The linearity, cosine response, temperature response, wavelength scale, stray-light and slit function of the spectroradiometer were determined and their effects on the measurement accuracy evaluated. The main error sources were stray-light and nonideal cosine response, for which correction methods are presented. Without correction, the stray-light may reduce the accuracy of the measurement excessively, particularly in the UV-B range. The expanded uncertainty of the corrected UV measurements is estimated to be 14%, which is confirmed with the comparative measurements carried out with a well-characterized double-monochromator spectroradiometer. The measurement accuracy is sufficient for sunbed measurements, provided that all corrections described above have been done and the user of the instrument has a good understanding of the instrument's operating principles and potential error sources. If these requirements are met, the tested spectroradiometer improves and facilitates market surveillance field measurements of sunbeds.     

Bis[1,1′‐bis(diphenylphosphino)ferrocenium] hexadecachlorotetraantimony(III) ethanol solvate

In the title compound, [Fe(C₁₇H₁₄P)₂]₂[Sb₄Cl₁₆]·C₂H₆O, the Fe atoms lie on inversion centres and the pairs of cyclopentadienyl rings are consequently in a fully staggered conformation. The centrosymmetric anionic clusters formed by [Sb₄Cl₁₆]^4? are surrounded by the cations and are held together by weak C—H?Cl interactions. These formations stack along the a axis to form columns, and the columns are interconnected by another weak C—H?Cl interaction along the b axis.     

Where are the Sn atoms in LaSb2Snx, 0.1?x?∼0.75?

The composition range and (composite modulated) structure of compounds within the wide range non-stoichiometric LaSb₂Sn_x, 0.1?x?0.75, solid solution is carefully investigated via a combined electron diffraction, XRD and electron probe microanalysis study. Evidence for metastability of the LaSb₂Sn_x phase at the low x composition end of the solid solution is presented. Direct evidence is found for a reasonably (although by no means perfectly) well ordered Sn sub-structure which is, in general, mutually incommensurable with respect to a very well ordered underlying LaSb₂ sub-structure along both a and c directions. The overall (3+2)-d superspace group symmetry is given along with a discussion of the consequences as regards the arrangement of the Sn atoms. The Sn sub-structure c-axis cell dimension shows very little variation with composition x providing direct experimental evidence of the importance of Sn-Sn metallic bonding (along one-dimensional [001] Sn strings) for the stability of the phase.     

Determination of the Dissociation Constants of Urocanic Acid Isomers in Aqueous Solutions

Summary. (E)- and (Z)-Urocanic acids are endogenous chemicals in the normal mammalian skin. The first and the second thermodynamic dissociation constants (pK _a1 and pK _a2) of urocanic acid isomers were determined using UV spectrophotometry in aqueous solutions. The values with standard deviation (pK _a1 = 3.43 ± 0.12 and pK _a2 = 5.80 ± 0.04) and (pK _a1 = 2.7 ± 0.3 and pK _a2 = 6.65 ± 0.04) were obtained to (E)- and (Z)-urocanic acids, respectively. The second dissociations were studied also by potentiometric titration in aqueous sodium chloride solutions up to the isotonic salt concentration (0.154 mol dm⁻³), and the second thermodynamic dissociation constants as well as activity parameters for both isomers were determined at temperature 25°C and for (E)-urocanic acid also at 37°C. The obtained pK _a2 values were close to those found by UV spectrophotometry. The equations for the calculation of the second stoichiometric dissociation constants of urocanic acid isomers on molality and molarity scale in aqueous sodium chloride solutions were derived. The obtained pK _a1 and pK _a2 values for (Z)-urocanic acid appear to be essentially lower than some previously reported values in literature. An erratum to this article is available at .     

Fatty amides synthesized from vegetable oil as extractant of molybdenum(VI)

In this study, fatty amides (FAs) synthesized from palm olein were used to extract and separate Mo(VI) from acidic media. Effects of various parameters upon the separation of Mo(VI) from Co(II), Ni(II), Al(III) and Mn(II), including extractant concentration, metal ion concentration, contact time, diluent, and acidity, were investigated. It was found that Mo(VI) was successfully separated from the above commonly associated metal ions by stripping from the loaded organic phase. Different acidic and alkaline solutions were used. Ammonium hydroxide solution was an optimal. Extraction of Mo(VI) into the organic phase involved the formation of 1:3 complexes. This work presents the development of a low-cost and environmentally friendly extractant to recycle and recover molybdenum.     

Experimental investigation and optimization of loop heat pipe performance with nanofluids

Journal of Thermal Analysis and Calorimetry - High heat generation from electronic devices needs to cool down properly to prevent overheating. Loop heat pipe (LHP) is one of the excellent cooling...