Quantitative determination of Malathion in pesticide by modified attenuated total reflectance-Fourier transform infrared spectrometry applying genetic algorithm wavelength selection method

A simple and environment friendly method was developed for determination of Malathion content of analytical and commercial insecticide samples with no special preparation. Attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectra were characterized and 1000-2000 cm⁻¹ region was selected for quantitative analysis utilizing partial least square (PLS) and two wavelength selection methods: (a) principal component regression (PCR) and (b) genetic algorithm (GA). Relative error of prediction (REP) was calculated in PLS, PCR-PLS and GA-PLS methods and was 3.536, 1.656 and 0.188, respectively. Proposed method is successfully applicable for quantification of Malathion in commercial grade samples and reliable results in comparison with known methods, confirms this idea.     

Synthesis,Characterization, and an ab initio Study of a Manganese(II) Macrocyclic Schiff-Base Complex with Two 2-Aminoethyl Pendant Arms

The cyclocondensation of 2,6-diformylpyridine with N,N,N,N-tetrakis(2-aminoethyl)ethane-1,2-diamine (pentene) in the presence of Mn^II forms the [1 + 1] pendant arm Schiff-base macrocyclic complex, [MnL³]²⁺. The ligand is a 15-membered pentaaza macrocycle having two 2-aminoethyl pendant arms {L³= 6,9-bis(aminoethyl)-3,6,9,12,18-pentaazabicyclo[12.3.1]octadeca-1(18),2,12,14,16-pentene}. The complex, investigated by analytical, spectroscopic and magnetic techniques, supports the formation of a highly symmetrical pentagonal bipyramid complex with the Mn^II ion located within a pentaaza macrocycle and two pendant amines coordinating on opposite sides of a plane defined by the macrocycle and the metal ion. The structure of the complex was also verified by ab initio HF-MO calculations using a standard 3-21G basis set.     

Photoelectrocatalytic degradation of 3-nitrophenol at surface of Ti/TiO2 electrode

The widely utilization of phenol and its derivatives such as 3-nitrophenol (3-NP) has led to the worldwide pollution in the environment. In this study, Ti/TiO₂ photoelectrode was prepared with anodic oxidation of Ti foil electrode and then the photoelectrocatalytic (PEC) degradation of 3-NP was performed via this electrode, comparing with photocatalytic (PC), electrooxidation and direct photolysis by ultraviolet light. A significant photoelectrochemical synergetic effect in 3-NP degradation was observed on the Ti/TiO₂ electrode and rate constant for the PEC process of Ti/TiO₂ electrode was about three times as high as its PC degradation process. 3-NP concentration monitoring was carried out with differential pulse voltammetry. Results showed that PEC degradation has highest effect on concentration decreasing of 3-NP at solution and degraded it about 38 %, while other processes degradation efficiencies were about 4, 7, and 12 % for electrooxidation, direct photolysis and photocatalytic degradation, respectively. Finally, effects of solution pH and applied potential on degradation efficiency were studied and results showed that optimum pH for degradation is equal 4.00 and optimum potential is 1.2 V vs. Ag|AgCl|KCl (3M) reference electrode.     

Mononuclear copper(II) complexes of bis-triazole-based macrocyclic Schiff base hydrazones: direct synthesis,EPR studies,magnetic and thermal properties

Mononuclear copper(II) complexes of 1,2,4-triazole-based Schiff base macrocyclic hydrazones, III and IV, have been reported. The prepared amorphous complexes have been characterized by spectroscopic methods, electron spray ionization mass spectrometry, and elemental analysis data. Electrochemical studies of the complexes in DMSO show only one quasi-reversible reduction wave at +0.43 V (ΔE = 70 mV) and +0.42 V (ΔE = 310 mV) for III and IV, respectively, which is assigned to the Cu(II) → Cu(I) reduction process. Temperature dependence of magnetic susceptibilities of III and IV has been measured within an interval of 2–290 K. The values of χ_M at 290 K are 1.72 × 10^?3 cm³ mol^?1 and 1.71 × 10^?3 for III and IV, respectively, which increases continuously upon cooling to 2 K. EPR spectra of III and IV in frozen DMSO and DMF were also reported. The trend g_|| > g⊥ > g_e suggests the presence of an unpaired electron in the d_x2?y2 orbital of the Cu(II) in both complexes. Furthermore, spectral and antimicrobial properties of the prepared complexes were also investigated.     

Water treatment: functional nanomaterials and applications from adsorption to photodegradation

Global efforts for engineering desired materials which are able to treat the water sources still are ongoing in the bench level methods. Considering adsorbent and photocatalytic materials as the main reliable candidates still are encountering with struggles because of many challenges that restrict their large-scale application. This review comprehensively considered the recent advanced materials water treatment methods which involve to magnetic, activated carbon, carbon nanotubes (CNTs), graphene (G), graphene oxide (GO), (Graphene) quantum dots, carbon nanorods, carbon nano-onions, and reduced graphene oxide (RGO), zeolite, silica and clay-based nanomaterials. The adsorption and photocatalytic properties of these nanomaterials introduced them as highly potent option for heavy metal ions and organic dyes removal and photocatalytic degradation. High specific surface area in conjugation with presenting higher kinetics of adsorption and decomposition are the main characteristics of these materials which make them appropriate to treat wastewater even in ultralow concentration of the pollutants. Considering the mechanistic aspects of the adsorption and photocatalytic decomposition process, challenges and opportunities were other subjects that have been highlighted for the discussed nanomaterials. In term of the adsorption approaches, the mechanism of adsorptions and their influence on the maximum adsorption capacity were discussed and also for photocatalyst approach the radical active spices and their role in kinetic and efficiency of the organic pollutant decomposition were provided a deep discussion.     

Synthesis, crystal structure and spectroscopic properties of some cadmium(II) complexes with three polyamine and corresponding macroacyclic Schiff base ligands

Three Cd(II) macroacyclic Schiff base complexes [CdL⁴(NO₃)₂] (4), [CdL⁵(NO₃)₂] (5), [CdL⁶(NO₃)₂] (6) were prepared by template condensation of 2-pyridinecarboxaldehyde with N1-(2-nitrobenzyl)-N1-(2-aminoethyl)ethane-1,2-diamine (L¹), N1-(2-nitrobenzyl)-N1-(2-aminoethyl)propane-1,3-diamine (L²) or N1-(2-nitrobenzyl)-N1-(3-aminopropyl)propane-1,3-diamine (L³), in the presence of cadmium metal ion, respectively. Three Cd(II) complexes with L¹, L² and L³ were also synthesized. All complexes have been studied with IR, ¹H NMR, ¹³C NMR, DEPT, COSY, HMQC and microanalysis. Two of these complexes, [CdL⁴(NO₃)₂] (4) and [CdL¹(NO₃)₂] (1) have been characterized through X-ray crystallography. In complex 4, the Cd is in a six-coordinate environment comprised of the ligand N₄-donor set and two oxygen atoms of two nitrate groups. In the polyamine complexes (1, 2 and 3) Cd and ligand are in a ratio of 1:1. Supporting ab initio HF-MO calculations have been undertaken using the standard 3-21G^∗ and 6-31G^∗ basis sets.     

甲醇制丙烯:最重要的催化剂及其性能

由于世界范围内原油缺乏和丙烯需求量增长,在甲醇转化制烃类的不同路线中,甲醇制丙烯(MTP)过程得到发展.本文讨论了催化剂结构对MTP工艺条件的影响以及分子筛酸性、晶粒尺寸、中孔特性和拓扑结构等因素对催化剂催化MTP反应活性和选择性的影响.     

Artificial neural network for quantitative determination of total protein in yogurt by infrared spectrometry

A method has been introduced for quantitative determination of protein content in yogurt samples based on the characteristic absorbance of protein in 1800-1500 cm^− 1 spectral region by mid-FTIR spectroscopy and chemometrics. Successive Projection Algorithm (SPA) wavelength selection procedure, coupled with feed forward Back-Propagation Artificial Neural Network (BP-ANN) model was the benefited chemometric technique. Relative Error of Prediction (REP) in BP-ANN and SPA-BP-ANN methods for training set was 7.25 and 3.70 respectively. Considering the complexity of the sample, the ANN model was found to be reliable, while the proposed method is rapid and simple, without any sample preparation step.     

Application of QR Decomposition Algorithm for Multivariate Calibration in High Overlapping Systems

An accurate and stable algorithm, QR Decomposition Algorithm (QRDA) is initially presented into the chemistry field. The basic principle of QR Multivariate Calibration Algorithm (QRMCA) is investigated, and the complexes system of sodium tripolyphosphate (STPP), sodium sulfate (SS), and sodium Carbonate (SC) with serious overlapping absorption peaks is analyzed by QRMCA. According to our survey, QRDA can avoid matrix inverting, reduce the orders of matrixes, and speed up the operation of matrices. So, it has bright prospects in chemometrics. The process of the QR Decomposition Algorithm (QRDA) was implemented by an orthogonal and upper triangular matrix decomposition that is robust and convenient. Then it was applied to overcome the problem of overlapping spectra of different components in detergent-washing powder.     

Pyridazine-based Schiff base ligands with N4OxS2 (x = 2, 4) donor set atoms: Synthesis,characterization, spectral studies and 13C chemical shifts computed by the GIAO-DFT and CSGT-DFT methodologies

Six pyridazine-based Schiff base ligands, H₂Lⁿ (n = 1–5) and H₄L, with N₄O₂S₂ and N₄O₄S₂ donor set atoms, respectively, were prepared by condensation reaction of 3,6-bis-((2-aminoethyl)thio)pyridazine with various salicyladehyde derivatives in ethanol and under solvent-free polyphosphate ester catalyzed conditions. The acid–base properties of H₂L² and H₂L³ in DMSO/water (1:1) solution have been studied by spectrophotometric method at 25 °C. Optimized geometries of all compounds were also obtained at the B3LYP level of theory. Additionally, the ¹³C chemical shielding of gas phase H₂L¹ and H₂L² were studied by the gauge independent atomic orbital (GIAO) and continuous set of gauge transformations (CSGT) methods at the level of density functional theory (DFT). The 6-311++G* basis set was utilized for all of the atoms.