Comparison of stimulated-emission-pumping fluorescence dip spectrometry and conventional fluorescence spectrometry in application to supersonic jet spectrometry

Summary A supersonic jet spectrum of 9,10-dichloroanthracene is measured by stimulated-emission-pumping fluorescence dip spectrometry and conventional fluorescence spectrometry. The performance obtained is compared for these spectrometric methods, providing same information concerned with the energy level of the ground state. The former is more preferential for measurement of a high-resolution spectrum, since the spectral resolution is determined by the linewidth of the dumping laser. On the other hand, the latter is more preferential for measurement with better sensitivity at the expense of the spectral resolution, since the fluorescence throughput can be improved by increasing the slit width of the monochromator.Dedicated to Professor Dr. Wilhelm Fresenius on the occasion of his 80th birthday     

Aging of concrete buildings and determining the pH value on the surface of concrete by using a handy semi-conductive pH meter.

A new method was devised for measuring the pH of a concrete surface by pHBOY-P2 with a piece of filter paper by extracting the pH value from concrete. This is a simple and inexpensive method that does not damage the concrete building, and is easy to apply on concrete samples for monitoring. By using the method mentioned above, a drastic decrease of the pH value of concrete bridges and buildings has investigated. The method is environmentally friendly to detect the pH value change of concrete as an environmental sample investigation.     

Martin Boundaries of Elliptic Skew Products, Semismall Perturbations, and Fundamental Solutions of Parabolic Equations

We consider positive solutions of elliptic partial differential equations on non-compact domains of Riemannian manifolds. We explicitly determine Martin boundaries and Martin kernels for a class of elliptic equations in skew product form by exploiting and developing perturbation theory for elliptic equations and short/long-time estimates for fundamental solutions of parabolic equations.     

Integral representations of nonnegative solutions for parabolic equations and elliptic Martin boundaries

We consider nonnegative solutions of a parabolic equation in a cylinder D×(0,T), where D is a noncompact domain of a Riemannian manifold. Under the assumption [IU] (i.e., the associated heat kernel is intrinsically ultracontractive), we establish an integral representation theorem: any nonnegative solution is represented uniquely by an integral on (D×{0})∪(M_∂D×[0,T)), where M_∂D is the Martin boundary of D for the associated elliptic operator. We apply it in a unified way to several concrete examples to explicitly represent nonnegative solutions. We also show that [IU] implies the condition [SP] (i.e., the constant function 1 is a small perturbation of the elliptic operator on D).     

Optical humidity and ammonia gas sensors using Reichardt's dye-polymer composites

Optical intensity reflected at 750 nm by Reichardt's betain dye-polymer (PMMA or PEO) composite increased with an increase in humidity and was not affected by ammonia vapor. For the composites treated with hydrochloric acid, the intensity at around 590 nm decreased with an increase in ammonia concentration, and the sensitivity was enhanced by the presence of water vapor. The treatment with hydrochloric acid induced the formation of phenolic group, O⁻---H⁺ and N⁺---Cl⁻ in the dye. The sorption of NH₃ decreases the ionic interactions.     

Synthesis of Molecular Wires of Linear and Branched Bis(terpyridine)‐Complex Oligomers and Electrochemical Observation of Through‐Bond Redox Conduction

Films of linear and branched oligomer wires of Fe(tpy)₂ (tpy=2,2′:6′,2′′‐terpyridine) were constructed on a gold‐electrode surface by the interfacial stepwise coordination method, in which a surface‐anchoring ligand, (tpy? C₆H₄N?NC₆H₄? S)₂ ( 1 ), two bridging ligands, 1,4‐(tpy)₂C₆H₄ ( 3 ) and 1,3,5‐(C?C? tpy)₃C₆H₃ ( 4 ), and metal ions were used. The quantitative complexation of the ligands and Fe^II ions was monitored by electrochemical measurements in up to eight complexation cycles for linear oligomers of 3 and in up to four cycles for branched oligomers of 4 . STM observation of branched oligomers at low surface coverage showed an even distribution of nanodots of uniform size and shape, which suggests the quantitative formation of dendritic structures. The electron‐transport mechanism and kinetics for the redox reaction of the films of linear and branched oligomer wires were analyzed by potential‐step chronoamperometry (PSCA). The unique current‐versus‐time behavior observed under all conditions indicates that electron conduction occurs not by diffusional motion but by successive electron hopping between neighboring redox sites within a molecular wire. Redox conduction in a single molecular wire in a redox‐polymer film has not been reported previously. The analysis provided the rate constant for electron transfer between the electrode and the nearest redox‐complex moiety, k₁ (s^?1), as well as that for intrawire electron transfer between neighboring redox‐complex moieties, k₂ (cm² mol^?1 s^?1). The strong effect of the electrolyte concentration on both k₁ and k₂ indicates that the counterion motion limits the electron‐hopping rate at lower electrolyte concentrations. Analysis of the dependence of k₁ and k₂ on the potential gave intrinsic kinetic parameters without overpotential effects: k₁⁰=110 s^?1, k₂⁰=2.6×10¹² cm² mol^?1 s^?1 for [n Fe 3 ], and k₁⁰=100 s^?1, k₂⁰=4.1×10¹¹ cm² mol^?1 s^?1 for [n Fe 4 ] (n=number of complexation cycles).     

Novel synthesis of macrocycles with 1,1′-binaphthalene-2,2′-diol using intramolecular oxidative coupling

A new series of BINOL-based macrocycles with two phenolic protons have been synthesized via oxidative coupling reaction using CuCl(OH)-TMEDA.     

Electrical conducting and magnetic properties of (ethylenedithiotetrathiafulvalenothioquinone-1,3-diselenolemethide)2.FeBr4 (GaBr4) crystals with two different interlayer arrangements of donor molecules

Two donor molecules newly synthesized, dimethylthio- and ethylenedithio-tetrathiafulvalenothioquinone-1,3-diselenolemethides (1 and 2), were used to prepare their charge-transfer (CT) salts with a magnetic FeBr(4)(-) counteranion. For 1, a low electrical conducting 1:1 salt (1.FeBr(4)) was obtained, in which molecules of 1 are tightly dimerized in a one-dimensional (1D) stacking column. On the other hand, 2 gave a 2:1 salt (2(2).FeBr(4)) as two different kinds of plate crystals (I and II). Both I and II possess similar stacking structures of molecules of 2 in each 1D column with a half-cut pipelike structure along the c axis. However, for I, the stacking columns are aligned in the same direction along the a and b axes, while for II they are in the same direction along the a axis, but in the reverse direction along the b axis, resulting in the difference in the relative arrangement of molecules of 2 and FeBr(4)(-) ions between the two crystals. The room-temperature electrical conductivities of the single crystals of I and II were 13.6 and 12.7 S cm(-)(1), respectively. The electrical conducting behavior in I was metallic above 170 K but changed to be semiconducting with a very small activation energy of 7.0 meV in the temperature range 4-170 K. In contrast, II showed the semiconducting behavior in the whole temperature range 77-285 K. The corresponding nonmagnetic GaBr(4)(-) salts with almost the same crystal structure as I and II showed definitively different electrical conducting properties in the metal to semiconductor transition temperature in I as well as in the magnitude of activation energy in the semiconducting region of I and II. The interaction between the d spins of FeBr(4)(-) ions was weak and antiferromagnetic in both I and II, but the magnitude of the spin interaction was unexpectedly larger compared with that in the FeBr(4)(-) salt of the corresponding sulfur derivative of 2 with closer contact between the neighboring FeBr(4)(-) ions. These electrical conducting and magnetic results suggest a significant interaction between the conducting pi electrons and the d spins of FeBr(4)(-) ions located near the columns or layers.     

Measurements of short-lived cosmogenic nuclides in rain samples

Summary Extremely low activity levels of cosmic ray induced nuclides have been measured in freshly precipitated rainwater by quick chemical separation coupled with ultra low background gamma-spectrometry. The nuclides detected were ³⁸S (T_1/2 = 2.83 h)-³⁸Cl (37.2 m), ³⁹Cl (55.6 m), ²⁴Na (14.96 h), ²⁸Mg (20.9 h), ⁷Be (53.3 d) and ²²Na (2.602 y). The number of atoms in rain water were evaluated to be ranging from 400-1900 l^-1 for ³⁹Cl (n = 6, mean: 1200), 30-1500 l^-1 for ²⁴Na (n = 16, mean: 520), 80-600 l^-1 for ²⁸Mg (n = 13, mean: 260), 1 ^. 10⁶-4 ^. 10⁷ l^-1 for 7Be (n = 16, mean: 7 ^. 10⁶) and 2 ^. 10³-1 ^. 10⁵ l^-1 for ²²Na (n = 9, mean: 2 ^. 10⁴). Measurements of activity levels and activity ratios of short-lived cosmic-ray induced short-lived nuclides will open new method to understand atmospheric processes occurred at the altitude of rain cloud.     

Fluorometric determination of tin(IV) with 3-hydroxychromone

Summary 3-Hydroxychromone reacts with tin(IV) to produce 11 complex in a weakly acidic-neutral medium. The complex exhibits intense fluorescence. A sensitive method is described for the fluorometric determination of tin(IV) with 3-hydroxychromone. The calibration graph is linear in the range of 0.4–8.0g/25 ml of tin(IV) (pH 4.5–5.0, Excitation wavelength: 365 nm, Measured total fluorescence). Chloride which generally decreases the fluorescence intensity in the fluorometric determination of tin can be tolerated at 300-mg level.

---

Fluorometrische Bestimmung von Zinn(IV) mit 3-Hydroxychromon

Zusammenfassung 3-Hydroxychromon reagiert mit Zinn(IV) in schwach saurem bis neutralem Medium unter Bildung eines 11-Komplexes. Dieser fluoresziert intensiv. Ein empfindliches Verfahren zur Bestimmung von Sn(IV) auf dieser Grundlage wurde ausgearbeitet. Die Eichkurve verläuft in dem Gebiet zwischen 0,4 und 8,0g Sn/25 ml bei pH 4,5, einer Wellenlänge von 365 nm und bei Messung der Gesamtfluoreszenz geradlinig. Chloride, die die Fluoreszenzintensität bei Zinnbestimmungen im allgemeinen herabsetzen, können bis zu 300 mg toleriert werden.