Measurement of absolute intensity of 1001 keV gamma-ray of 234mPa

The sorption behavior of ²³⁵U fission fission products ⁹⁹Mo and ¹³²Te was studied through batch and dynamic experiments when they were dissolved in 1 to 7M HNO₃ solutions. It was found that ⁹⁹Mo is always totally adsorbed on hydrated SnO₂, while ¹³²Te is rather weakly adsorbed, therefore they can be separated from each other although ¹³²Te in the solution still remains contaminated with other radionuclides as well as ⁹⁹Mo does in the solid.     

All-Solid-State PVC Membrane Ag+-Selective Electrodes Based on Diaza-18-Crown-6 Compounds

Two diaza-crown ether compounds were synthesized and evaluated as Ag⁺-selective carriers in polyvinylchloride (PVC) membrane electrodes of solid-state type. The all-solid-state PVC membrane electrode based on N,N-Dibenzyl-dibenzo-diaza-18-crown-6 exhibited a super-Nernstian response (75±10mV per decade) over the concentration range of 1×10^–1 to 7×10^–6M of Ag⁺ ion and a detection limit of 3×10^–6M, at a wide range of pH (pH 4–7). The response time of the electrode was fast (less than 10s), and it can be used for three months without any significant deviation in potential. The proposed all-solid-state PVC membrane electrodes revealed high selectivity toward Ag⁺ ion with respect to alkali, alkaline earth, heavy and transition metal ions. A flow-through cell of all-solid-state PVC membrane Ag⁺-selective electrode based on N,N-Dibenzyl-dibenzo-diaza-18-crown-6 has also been prepared and applied for flow-injection analysis of Ag⁺ ion in solution.     

Establishment of a quality system for nuclear analytical laboratories

Comprehensive Quality Control (QC) and Quality Assurance (QA) Program is stated on the quality policy, organization, methods and records for nuclear analytical laboratories which are necessary for improvement of productivity, to upgrade the performance, credibility and reputation. The proper and complete identification of quality elements for management and technical requirements are being written in Quality Manual as well as analytical and organizational procedures and working instructions according to ISO 17025 standard. Technical ability of gamma, X-ray and a/b laboratories in the Center has been checked by participation in proficiency test, critical technical variables, and quality results. Performance of quality system has been controlled by external audit inspection, progress reports and service to clients. The present study is a framework of the model project of IAEA, coded RER/2/004, which has resulted self-sustainable accreditation from the national body, TURKAK. This revised version was published online in August 2006 with corrections to the Cover Date.     

Supplier quality improvement: The value of information under uncertainty

We consider supplier development decisions for prime manufacturers with extensive supply bases producing complex, highly engineered products. We propose a novel modelling approach to support supply chain managers decide the optimal level of investment to improve quality performance under uncertainty. We develop a Poisson–Gamma model within a Bayesian framework, representing both the epistemic and aleatory uncertainties in non-conformance rates. Estimates are obtained to value a supplier quality improvement activity and assess if it is worth gaining more information to reduce epistemic uncertainty. The theoretical properties of our model provide new insights about the relationship between the degree of epistemic uncertainty, the effectiveness of development programmes, and the levels of investment. We find that the optimal level of investment does not have a monotonic relationship with the rate of effectiveness. If investment is deferred until epistemic uncertainty is removed then the expected optimal investment monotonically decreases as prior variance increases but only if the prior mean is above a critical threshold. We develop methods to facilitate practical application of the model to industrial decisions by a) enabling use of the model with typical data available to major companies and b) developing computationally efficient approximations that can be implemented easily. Application to a real industry context illustrates the use of the model to support practical planning decisions to learn more about supplier quality and to invest in improving supplier capability.     

Investigation of the reaction mechanism and kinetics of production of anhydrous sodium metaborate (NaBO2) by a solid-state reaction

In this study, the solid-state reaction mechanism and kinetics were investigated for production of anhydrous sodium metaborate (NaBO₂), an industrially and technologically important boron compound. To assess the kinetics of solid-state production of NaBO₂, the chemical reaction between borax (Na₂B₄O₇) and sodium hydroxide (NaOH) was investigated by use of the thermal analysis techniques thermogravimetry (TG) and differential thermal analysis (DTA). DTA curves obtained under non-isothermal conditions at different heating rates (5, 10 and 20 °C/min), revealed five endothermic peaks corresponding to five solid-state reactions occurring at 70, 130, 295, 463, and 595 °C. The stages of the solid-state reaction used for production NaBO₂ were also analyzed by XRD, which showed that at 70 and 130 °C, Na₂B₄O₇ and NaOH particles contacted between the grains, and diffusion was initiated at the interface. However, there was not yet any observable formation of NaBO₂. Formation of NaBO₂ was initiated and sustained from 295 to 463 °C, and then completed at 595 °C; the product was anhydrous NaBO₂. Activation energies (E _a) of the solid-state reactions were calculated from the weight loss based on the Arrhenius model; it was found that in the initial stages of the solid-state reaction E _a values were lower than in the last three steps.     

Two-dimensional agnor evaluation as a prognostic variable in urinary bladder carcinoma: a different approach via total agnor area/nucleus area per cell

Traditional criterions are not sufficient to predict accurately the recurrence of transitional cell carcinoma of the urinary bladder. Therefore, we aimed to evaluate the AgNORs via total AgNOR area/nucleus area (TAA/NA) for each cell as a prognostic parameter, in TCC of urinary bladder. Tumor tissues of 20 consecutive cases of male bladder cancer patients were divided into two groups as middle differentiated (LG) and high grade (HG). The extra-tumoral tissue (ETT) samples of 10 males served as control group. A second control group (HC) consisted of five healthy and normal bladder tissue samples. The 3 microm of sections from each paraffin embedded tumoral, extra-tumoral and normal tissue samples served as patient and control groups. After deparaffinization and rehydratation steps, silver (AgNO(3)) staining of nucleolar organizer regions-associated proteins (AgNORs) was performed. Instead of Giemsa stain, we used Hematoxylin for contra staining. The images of the 100 analyzable nuclei from each tissue sample, transferred by means of a video camera and video capture card from microscope and recorded onto a computer. Software was prepared in Delphi language for analysis. Mean (E+02) TAA/NA values of HC, ETT, LG and HG groups were 6.97+2.80, 5.70+1.82, 7.80+3.22 and 9.24+3.88, respectively. Statistical comparisons have shown significant differences between all groups.In conclusion, mean TAA/NA per cell has a potential to be a prognostic parameter. Therefore, further evaluation of big patient series will be useful.     

Thermal properties and kinetics of new-generation posterior bulk fill composite cured light-emitting diodes

In this study, the thermal behavior in terms of glass transition (T _g), degradation, and thermal stability of four commercial new-generation posterior bulk fill composites (Surefill SDR, Dentsply; Quixfill, Dentsply; Xtrabase, Voco; and Xtrafill, Voco) activated by light-emitting diodes (LEDs) was analyzed by thermogravimetric analysis (TG), differential scanning calorimetry (DSC), and dynamic mechanical analysis (DMA). The activation energies (E _a) for the decomposition of the dental resins were calculated based on the Kissinger and Doyle kinetic models from the peaks of the endothermic curves obtained when the specimens were heated at four different temperatures (5, 10, 15, and 20 °C min^?1) during DSC. The results show that the Xtrabase composite displayed the highest T _g (120 °C at a 5 °C min^?1 heating rate) and E _a (157.64 kJ mol^?1) values associated with thermal degradation from the main chain of the polymer.