Succinic acid adsorption from fermentation broth and regeneration

More than 25 sorbents were tested for uptake of succinic acid from aqueous solutions. The best resins were then tested for successive loading and regeneration using hotwater. The key desired properties for an ideal sorbent are high capacity, complete stable regenerability, and specificity for the product. The best resins have a stable capacity of about 0.06 g of succinic acid/g of resin at moderate concentrations (1–5 g/L) of succinic acid. Several sorbents were tested more exhaustively for uptake of succinic acid and for successive loading and regeneration using hot water. One resin, XUS 40285, has a good stable isotherm capacity, prefers succinate over glucose, and has good capacities at both acidic and neutral pH. Succinic acid was removed from simulated media containing salts, succinic acid, acetic acid, and sugar using a packed column of sorbent resin, XUS 40285. The fermentation byproduct, acetate, was completely separated from succinate. A simple hot water regeneration successfully concentrated succinate from 10 g/L (inlet) to 40–110 g/L in the effluent. If successful, this would lower separation costs by reducing the need for chemicals for the initial purification step. Despie promising initial results of good capacity (0.06 g of succinic/g of sorbent), 70% recovery using hot water, and a recovered concentration of >100 g/L, this regeneration was not stable over 10 cycles in the column. Alternative regeneration schemes using acid and base were examined. Two (XUS 40285 and XFS-40422) showed both good stable capacities for succinic acid over 10 cycles and >95% recovery in a batch operation using a modified extraction procedure combining acid and hot water washes. These resins showed comparable results with actual broth.     

Introduction

Applied Biochemistry and Biotechnology -     

Synthesis of homoleptic Re(I) complexes of isocyano-carboranes and the X-ray structure of hexakis(p-carboran-1-yl-isonitrile)Re(I)

Two homoleptic Re(I) complexes of ortho and para-carborane isocyanide ligands were prepared as the first examples of a new class of metal-based BNCT and BNCS agents. The target compounds were prepared in low yield through the reaction of [Re₂(O₂CPh)₄Cl₂] and [Re₂(OAc)₄Cl₂] with 3-isocyano-1,2-dicarba-closo-dodecaborane and a para-carborane azetidine derivative respectively. The desired product from the latter reaction was characterized crystallographically and is only the second reported molecular structure of a homoleptic Re(I) isonitrile complex.     

Simultaneous fermentation and separation of lactic acid in a biparticle fluidized-bed bioreactor

A bioreactor configuration has been tested for simultaneous fermentation and separation of the desired inhibitory product, lactic acid. The bioreactor is a fluidized bed of immobilized Lactobacillus delbreuckii. Another solid phase of denser sorbent particles (a poly-vinyl pyridine resin) was added to this fluidized bed. These sorbent particles fell through the bed, absorbed the product, and were removed. In test fermentations, the addition of the sorbent enhanced the fermentation and moderated the fall of the pH. The biparticle fluidized-bed bioreactor utilizing immobilized microorganisms and adsorbent particles has been shown to enhance the production of lactic acid fourfold in this nonoptimized system.

     

On-line storage and retrieval of chemical information. II. Substructure and biological activity searching

An improved interactive system for searching substructure and biological activity data has been developed. Features of the system include a two-level substructure search (fragment screen and atom by atom) and an expanded biological activity data base. The system operates on a file of about 150 000 compounds.     

Performance of the diffusive gradients in thin films technique for measuring Ca and Mg in freshwater

Measurements of the major cations Ca and Mg by the technique of diffusive gradients in thin films (DGTs) were systematically evaluated. The concentration in solution was calculated using Fick’s first law of diffusion from the directly measured flux to the DGT device. A selective cation exchange resin (Bio-Rad Chelex^®100), which has been used extensively with DGT for trace metals, such as Cd²⁺, Cu²⁺ and Ni²⁺, was used for this work.

Elution of Ca and Mg from the resin with 1 M HNO₃ was very reproducible. Measurements of Ca and Mg concentrations in synthetic solutions agreed well with the theoretical predictions. The negative response on uptake caused by lowered pH was investigated. Uptake was found to decline below pH 5. The capacity of the DGT device for Ca and Mg was also investigated to establish maximum deployment times for given concentrations.

Experiments with filtered and modified lake water show that DGT can be used to measure Ca and Mg when trace metals are present in the solution. An in situ deployment of DGT combined with an ultrafiltration study suggest that the Mg concentration measured by DGT is similar to the concentration found in the fraction <1 kDa.